Spigen AluminaCore Tempered Glass Screen Protector [GlasTR EZ FIT] designed for Pixel 10 Pro | Pixel 10 | Pixel 9 Pro | Pixel 9 [2 Pack] Aluminum-Enhanced Durability and Impact Resistance

Flawless installation process with the included installation jig. I had a no-name screen protector with privacy filter, it severely dimmed my screen and was easily scratched. This Spigen screen protector is top knotch quality, the clarity and passthrough brightness really outshines the competition, pun intended. Fitment was perfect, it looks flawless and has no defects or damage after several weeks of heavy use proving it is durable and no dust or lint intrusion. It has worked flawlessly with facial unlock and fingerprint unlock. The protector has worked well with my phones protective case with no edge lifting. The installation kit comes with a pack of two, which should cover the life of my device over the next 2-3 years.

I think the last time I got tempered glass screen protectors was about 5 years/ 4 phones ago. I'm not prone to dropping phones, and the times I have dropped them, there were never any screen breakages. Plus, they were always a huge production to apply. I got these protectors because it looks like the installation technology has advanced - a LOT - since then. There's a hard plastic frame holding the glass that fits right over the phone. There is some adhesive stuff to remove (first on the part that goes onto the phone, then the part you rub for the backing). There are all kinds of extra accessories: Wet screen wipes, adhesive dust removal stickers, a foam squeegee (my past experience had next to useless hard plastic squegees). I supplied my own latex food handling gloves, just to make the whole experience feel almost surgical in nature (Nurse, sponge) and to keep my fingerprints off of anything (for aesthetics, there were no crimes being committed). I read the instructions for the novelty of it, but the whole system is so intuitive that you really shouldn't need to read them. Everything was completely in line with my expectations of what would need to be done. I'm not sure how (and this has to be completely on me), but despite my careful gloving, wipedown, application, rubbing the back and peeling, and lifting the frame, the first protector had bubbles with minute spots in the middle that the squeegee couldn't get rid of. The second one, I made sure I did the whole thing with a fan blowing gently over the work area. That one installed with no issue. Overall, installation was way, way easier than what I was used to. The main reason I recommend this to any Pixel 9 Pro XL user, whether prone to dropping screens or not, is the oleophobic quality. I've managed to get fingerprints on the glass. But a quick wipe on my sleeve, or my hip, and it's like I've never touched the screen. Prior phones (a couple of them Pixels), it was basically a chore clearing off fingerprints/ finger marks. That alone makes this worth it. I am not willing to drop my phone face down from any height to test its protection. However, for the sake of all of you, I used a sharp edge of a key along the very bottom and very top edges, pressing hard, to see if I could scratch the glass (I won't risk cracking the phone screen, but I'm fully willing to buy another set of screen protectors). The sharp key point skated around with no scratch-making sound. The glass had no scratches. So then, I used a box cutter. I dug the point in, hard, and went from side to side (as though I was opening a package), and a bit up and down (basically moving the point 'sideways' in relation). This time, I heard and felt vibration, as though scratches were being made. Nothing. Nothing to a finger rubbed over the area, nothing when I held the phone up to the light at an angle that would show scratches. As for touch sensitivity, I have never had a problem with it recognizing my thumbprint. Perhaps it's because I followed the often-repeated advice throughout the packaging, and took multiple thumbprints of the same angle (which I always have done anyway). But I added some index finger presses, like 2, and it reads my index finger just fine as well. I honestly don't see any downside to getting this kit. For me at least, the supidly easy to clean screen makes it completely worth it.

I’m so impressed that I had to leave a review. This is my first time buying a Spigen GlasTR EZ Fit screen protector for my Google Pixel 10 Pro XL, and I’m honestly shocked at how easy it was to install. For every phone I’ve owned, screen protectors have always been a struggle—dust, bubbles, crooked alignment, you name it. Not this one. The EZ Fit installation made it feel like a professional install when I was finished. It went on perfectly clean, straight, and bubble-free on the first try. This is by far the easiest and cleanest screen protector installation I’ve ever done. Huge thank you to Spigen for making an incredible product and designing an install process that’s actually stress-free. Highly recommend!

Seldom do I install a screen protector with utter perfection (straight on and no dust bubbles). This is my new go-to brand. Thanks for making such an easy and just about foolproof. Any bubbles squeegee right out. They seem very thick and protective, my finger glides effortlessly, and they are perfectly compatible with my Pixel 10 phone.

Honestly, this is so easy and foolproof to install one could do it blindfolded. There's absolutely no way one could mess up installing this. Fit great, looks great, I had the same one on my Pixel 6a, now 3 years old. I dropped it countless times and it only has 2 or 3 hairline cracks. So much so that I never bothered to replace with the extra one. Fingerprint sensor works great too. This is a great product, you won't be disappointed.

Glass screen protector for Google Pixel 10 Pro is fairly easy to install (try to be in a dust-free environment - even if you are, you'll have some to remove, but the little stickers work quite well). The alignment tool works well for the installation and the glass sticks very nicely. You may see some small air bubbles where dust got trapped, but you can pick up a corner and slide a sticker to the dust to grab it fairly easily. It's nice that 2 of these come in a pack. I just installed it, so I'm not sure how long it will last but I have high hopes it will be good for a while. The fit is ever so slightly inside the screen, but that's important if you plan on using a case with your phone.

After following all the steps and applying the screen protector, I noticed it had something causing a big bubble that wouldn't go away. I tried removing it by picking it off or wiping it carefully to no avail it seems to be the glass itself that has that bump. The second screen protector applied perfectly fine with no issue. Half a review for half the product I received.

Easy to install. Provides supporting tray that customized for Pixel 9 series with the shape of camera bump at the back. The tray is made of dense form which provides good support and helps keep camera at even level with the screen protector installation frame provided. The included squeegee is a good quality one. It has soft tip than just one plastic piece. Nice. The included instruction is clear. It is not too small print and it is step by step illustrations. Putting the frame on phone is also easy. The alignment is good. The instruction indicates to press on to the slot in the middle back and forth. I also applied pressure evenly across the frame as well. You can see how the protector adheres to the screen to most parts (of course some ares of the screen are covered by stickers etc.). I think that helps eliminate bubbles afterward well. In my case, the first application came out 100% bubble free right away. I'll come to the reason for the second application in my case a little later. Peeling the back to sicker off the frame is also easy but I will be careful to pull it slowly and keep firm holding to the frame to the phone while pulling to prevent tearing off the pulling-sticker. Pulling the top clear sheet is the next step after the frame is lifted. This step is the. most easy part. No issue there, just pull the tabs off. Again, I would do it gently as to prevent pulling off the screen protector itself which is stilly newly applied. Just a precaution. I did not have any issue with both applications during this step. T The last step is to look for bubbles and squeeze out ones if there are any. The second application had a small one near the middle. It was very easy to eliminate. I used the squeegee to squeeze it out. Only few swipes down without having to chase it out to the edge at all. It was probably because I did not consistently apply pressure around the frame as the first time. Fingerprint sensing is good. There is no need or perceived performance degradation at all. Unlock is as fast as without the protector. This is another point of concern for this generation of Pixel as it moved to use ultrasound sensing which can be impeded by solid material (a nature of sound wave). This flies so well. The screen protector has a light gap around the edge so it fits my case perfectly. The star is taken off is probably may not be the product issue and perhaps mine. However, I have reviewed few online reviews of this model and they have more or less ran into the issue of dust remained after applied this screen protector. I thought I have a way to prevent that from happening. I keep the frame down while peeling the backing sheet from underneath to prevent dust from falling on to the sticky side of the screen protector. I triply wiped the screen and inspected. The first application had what it looked like a fine long thread of fiber on it. It was so obvious and I couldn't stand seeing it. The protector is easy to remove by the way at this stage and that is a good thing. I attempted the second application and did more checks etc. This time was much better than the first time but still one spot on the screen that caught a spec. of dust. This one is a "spot" kind of dust and it is very small and is not like to catch eyes. That is much better. I think the product is good. You need to find a good clean room perhaps to get complete dust free installation. I just wish Spigen with installation apparatus that give dust free installation like some other brands for Pixel 9 pro. recently.