8.5 Inches Tire - Front/Rear Tire Wheel Replacement for Xiaomi mijia Durable 8 1/2x2 M365 Electric Scooter Skate

Perfect for the scooter. Very very hard to fit but at least you know that once you get them in they’ll stay there. I actually used a spoon through the wheel’s holes as a lever once it was 75% in to finish mounting it. It will be less smooth than the air tires but definitely prefer this than getting flat tires all the time.

Way more vibration..... Impossible to fit it by myself.... I brought it to the bike shop they where struggling too.... Rubber is very hard even with the holes..... But I'm really happy to do not need to fix a tube every week...... Let's see how long I'll be happy....🤞🏾🤞🏾🤞🏾🤞🏾🤞🏾

Great product to save money on puncture kits and time. extremely difficult to put on had to get a mechanic to fit them (cost me £40) does make the ride very bumpy on gravel and any tiny potholes feel like they are much bigger. I would not change them as I have learnt to steer better and find smoother ways to ride it. Buy with confidence but be prepared for a more bumpy ride

After about an hour of stretching and lubricating I gave up trying to fit this tyre. It will not fit on unless you have specialised equipment.

Great little tyre, only thing is you can not fit it yourself you will need to take it to a professional to fit, I tried for 2 to 3 hrs after boiling it in hot water to make it more suptle, still didn’t work there was two men trying but still couldn’t. Proper tyre fitting equipment is needed , ended up taking mine to my local tyre shop who they fitted it for me. Iasume on there automated tyre machine. Not as absorbent that the air inflated tyre , but ok at least I won’t get a flat.

Installed to both front & rear. 3x 1min in microwave did the trick, used cable ties, a little force and tyre levers to get tyres on. Bit bumpier ride, but small price to pay to avoid punctures.

I was sure I would not be able to fit it. I went to a tyre shop and they could not fit it. So I went home and watched the video again. Boiled for 20 min and made it with reasonably easy using 2 long screwdrivers (cheap € 1.50 ones). my wife helped me holding the screwdriver in place. Very happy with results, will ride it tomorrow and will tell how it feels on the road. Edited: I've been on the road for a week or so. You really feel the bumps and it vibrates more responding to textures on the road. I have the front still air filled and this solid in the back. I think I'll keep it this way, fill the front one with slime and not have both solid. I am happy with the product.

extremely hard to fit, I couldn't do it myself, had to ask my neighbour for help, it took us around an hour to fit it, I've put it into a microwave for a few minutes first an, and then we used quite a lot of contents from my toolbox, including bicycles tyre levers which not very useful, next were two screwdrivers and cable ties, closer to the end we used two chisels and sometimes screwdrivers plus our feet and knees. Honestly if you can wait a few hours then take it to a bicycles shop and get them to do it for you for a fiver

Un poco difícil de poner si lo haces solo, pero con vaselina y un poco de ayuda de alguien se pone bien ,pero cuidado con ponerlo bien en el sitio con algo que sea punzante, la mia se rajo un poco por usar un destornillador

J'ai acheté ce pneu pour changer celui de la roue avant. J'avais une fuite lente, et j'en avais marre de devoir regonfler le pneus tous les 2 jours, et j'étais constamment en stress de crevaison. Avec ce pneu, plus de problème! Il est relativement souple, ce qui évite de trop sentir les chocs, et ne fait pas plus de bruit que le pneu d'origine. J'en ai même commandé un 2ème pour changer le pneu arrière. ATTENTION: le montage est vraiment difficile, les gens n'exagèrent pas en le disant dans les commentaires. Donc, je le répète: - 2 personnes - chauffer le pneu (eau bouillante ou micro-ondes) - utiliser des monte-pneus en métal (ceux en plastique casseront), ou même carrément des tournevis, ce sera encore plus facile - n'hésitez pas à lubrifier afin que le pneu glisse plus facilement Une fois que c'est monté, c'est un réel bonheur!

Top Reifen für meinen Me Scooter

Tenuta di strada molto buona non ho visto molta differenza con le altre con la camera d'aria, ma comunque ti danno il grip e stabilità di una gomma a con camera d'aria bella piena. Nota per il montaggio: sono stato scoraggiato a comprarle per le varie recensioni negative riguardanti il montaggio, ma sono stato spronato dal mio gommidta di fiducia.. infatti me le ha montate in 5 minuti ciascuna togliendo lo smontaggio dei bulloni e viti varie.. quando gli ho spiegato che il web non è in grado di mintarle se non con l'ausilio di: microondi, pistole ad aria calda, acqua bollente... si è fatto una risata. Non vi scoraggiate e compratele che avete un pensiero di meno senza quella camera d'aria del cxxxo.. e cercate un buon gommista. Bella

Vraiment très bien. Très difficile à changer (acheter trois clés levier, car deux ne suffisent pas) mais ça vaut le coup. Je n’ai changé que l’arrière pour le moment et je pense que ça n’est pas utile de changer l’avant (à deux roues je n’ai jamais crevé qu’à l'arrière - expérience motard depuis 17 ans ;)) Niveau sensation : semble plus dur, évidemment, donc on ressent + de vibrations. Mais on peut prendre les bateaux de trottoirs jusqu’à 3 cms sans avoir l’impression qu’on va éclater le pneu arrière à tout moment. En résumé je conseille. MAJ 12/06 : attention pneu neuf, donc « rodage » nécessaire. Petit détail oublié hier, et un peu trop de confiance sur un sol mouillé, j’ai glissé et suis tombé plutôt très fort... heureusement j’avais un casque (toujours porter un casque les amis...). Quelques bleus et égratignures. Donc peut-être faut-il frotter un peu le pneu au papier de verre...(?) pour faire travailler un peu la gomme avant usage sur bitume