Xprite Ultra 300% Bright 60W LED Fog Lights w/DRL Compatible with 2018-2025 Jeep Wrangler JL JLU & 2020+ Gladiator JT, DOT, 6500K, Plug N Play, Front Bumper Fog Lamp with 2 Mounting Brackets, White

Great little lights for the price. Easy to install plus the wiring harness adapter makes it easy peasy. Theyre a good brightness, not offroad spot/flood light, but lights the road up like a foglight should. Adjusting is straight forward. Come with 2 brackets, a JK bracket & JL/JT bracket. I installed them on a JT with a rugged ridge arcus front bumper. Originally had the clear Xprite lights (same as these, they were very bright), but i wanted yellow for fog, snow, heavy rain......plus that yellow looks good. Housings are aluminum (quality), brackets are plastic (which isnt a problem at all). Highly recommend

Construction: the build of these fog lights far exceeded my expectations for the price. The feel and heft is more solid. The frame design and adjustment screw is very similar to the OEM lights. The wire harness has and adapter that makes it plug and play... save for the yellow wire that must be tapped into the turn signal light if you want to use the halo as a signal. This was easy enough. But you may have to provide your own wire taps. Overall, I couldn't be more pleased. Installation: was frustrating and fiddly, but not at all the fault of the product. My 2016 Jeep JK Sahara has tight clearances. If I had it to do over again, I may consider removing the bumper and installing the lights, then reattaching. You can use a creeper and get it done, but it was frustrating and took about 2 hours. For those reviews that said it was "easy, only takes 15 minutes" probably had an older model with easier access. However, they were a direct fit with no mods, and look great. Performance: The OEM fog lights are criminal. I upgraded my headlights to JW Speakers last month, which truly improved the light output. This made the pale yellowish, dim fog lights even more useless. Having dropped a large sum of money on the JW Speakers, I decided that I didn't need to spend $300+ for fog lights. The Xprite 60W are a fabulous choice for the price. The throw is wide, bright, and white... and really fills in any dim spots on the road from the headlights. I tapped the halo wire (yellow) into the turn signal, and it works awesome as a second blinker. Nice feature! Appearance: the fit is exactly like the OEM on my Jeep JK. The triple light bars compliment my LED headlights, which has both round lenses and long bars that light up. So, it looks like a complete package, not different pieces that do not match - like it was factory. Whether dark, or lit, my Jeep stands out in the area as unique. The first question most all Jeep owners ask is, "what is the first thing I should upgrade on my new Jeep?". Hands down, the most useful upgrade, and the biggest bang for the buck, are the headlights and fog lights. I believe that this offers better safety for night driving.

I don't write many reviews - but this one definitely deserves it. I am reviewing the 4" 60W Cree LED Fog lights with White Halo / ring I would give a 4.5 but had to round up as down would be the wrong direction. In reading reviews I saw some people complain they are not plug and play and that they had to snip and re-connect wires and such. So I thought no biggy - I just ordered the adaptors too. Upon receiving the fog lamps - I see they came with the adaptors to fit my 2011 wrangler in the box with the lamps. So I returned the adaptors I ordered separately and Amazon promptly gave me a complete refund on those - including shipping (thank you amazon). Not the reason for the .5 star deduction. Even though everything plugged in / fit great - the actual adaptor wires were reversed in both adaptors in the kit. I had ground where there should be positive and positive where should be ground. So after a little futsing with getting the wire plugs pushed out of the adaptors and reversing to the correct way I was good to go. End result still water proof adaptors - no cutting of any wires on vehicle nor lamps nor adaptors. Only extra wire these need is an accessory wire brought down to them from the fuse box so you can wire the halo ring to illuminate by itself without having the fog lights on if you so desire. The rings work as great daytime running lights - and when turning the fogs on - they are bright. Way better than factory blubs (obviously ). I have a pair of their matching headlights on order and if they look as nice as these (assuming they will) - it will be a great upgrade for the Jeep. One hint on installation. I watched some YouTube videos to get ideas how to remove the factory lamps as I also have a plow kit on the jeep making it even harder to get at. Most all I researched showed people going at it from the underside and even removing a cross bar attached to the frame as the lamps would not fit out of the underside otherwise. I took a much easier approach and removed the front grill (easy to do) then removed the black plastic just behind the bumper (that black piece that is about 4" deep by maybe 40" wide or so) - there are just 2 plastic screws to pop out to remove the fasteners and the whole things comes out. You can then remove the lamps from above and do all the wiring and such - very easy. Toughest part of the job was simply running a wire up to the fuse panel and down to one light and then over to the other (easy as well). Cant wait for the headlights - also I just ordered some new aluminum hood latches as I heard they are a bugger to install - however one person mentioned it was easy as he had the grill and headlights out. So being I will have those out - good timing to put on new hood latches.

Great customer service. Had an issue with one light and got a replacement with good, rapid communication. The lights are great (3 months usage) and emits a good amount of light. For the price range, these are a great choice.

Install was very easy on my 2013 wrangler. Driving with them on for about a year now and they still work great. Would recommend closing up the back of the wire with electrical tape or shrink tube. Big improvement in visibility , and they look really good as well, over all would recommend.

They look amazing! They are plug--play for the Fog light function. Comes with an adaptor harness that plugs right in. The extra wire is for the halo. The ground is shared from the main plug. . I wired the halo to the same circuit as the halos for the headlights. So they come on with the ignition switch and are always on. 9-May-2108 Update: 1 light has stopped working. The halo is still working but the main light is dead. Trying to see if it might be a harness issue, but have not determined 100% yet. They have a 1 yr warranty only. Once I am certain of the failure mode , I will post an update. 7-Jul-2022 Update Installed this set last summer and I have lost the halo on the passenger side already. Not certain why, but that side always seems to get water in it. I even sprayed this set with clear coat on the back to try and seal them more. The lights both still work as fog/driving lights, but only one halo works.

These fog lights work great! nice and bright. Only issue i had was fitting them to an aftermarket bumper i had to trim the ears of the fog lights to be able to fit. Was not a huge issue. Great value for the price

For the price of this product I wasn't expecting too much. Boy, was I pleasantly surprised! It was extremely easy to install and it works flawlessly and is extremely bright. I highly recommend it!