Maxxima 72 in. Hardwired LED Under Cabinet Strip Light, 2760 Lumens, 3000K Warm White, Kitchen and Living Room 120V White Cove Lighting, No Power Supply Needed

Really am Happy with these lights.First off these lights ARE NOT LINKABLE. The one end is the wire leads, the other end, where you would link lights, has a cap with no option to receive wires to the next unit. So, they must be twisted together at the wire end and then connected to power to get multiple lights to work. This is probably why there is a note that says “people frequently return this item”.2nd, these are REALLY NICE LIGHTS.I got them to replace some 20 year old LED rope lights. They are all connected to a motion sensor in the switch and turn on automatically.Once they were in and I turned them on the light in my kitchen turned into AMAZING. The light is bright but not blinding. The color temp is white but not that cold bright, hurt the eyes kind of white. Walking into the kitchen at 9pm and having them pop on is a new experience in light but I like it. I really don’t need to turn on the overhead lighting.Installation was easy and straight forward. On a couple of remote cabinets that had only one strip it was as easy as removing the old and attaching the new. But the main cabinets where I have 1 of the 18” between 2 of the 36” had to be twisted together at the center and then run a longer wire to the power. Not too hard.The clips that are included are great. The flat LED strip snaps right into it tightly. I mounted mine to face the back wall, NOT facing down like others may do. This washes the wall and bounces light all over the place lighting the area up like a professional set. I realize you can see the reflection in the marble (like the last set did) so I may cut an insert to cover up the wires.Overall I am very satisfied with the build quality, light brightness, and fit of these lights. I would definitely buy them again.

This improved the lighting over our kitchen sink. Much improved over the original and subsequent lighting fixtures, including florescent, halogen bulb and a battery powered rechargeable LED unit with proximity detection to turn it on. Clips supporting the strip work better than the magnetic clips for the rechargeable light, which were held to the cabinet bottom with thin double-sided adhesive pads. While I would have liked that it had an on/off switch like the prior fixtures, it is not a necessity.

I bought 5 of these at different lengths, if you have hardwired option these are it. STOP looking for anything else. These are great quality, easy install, a lot brighter and just what the kitchen needed. I had bought puck lights from 2016 but they blew out and replaced with these.UPDATE: I added a dimmer and 100% functions and dims. For those that say it’s they are bright now you add dimmer problem solved!

Fantastic, bright light, easy to install. love it!

Could not be happier with the glow. Installed in a "kitchenette" area in a commerical setting where office staff prepares their lunches. Two 21" cupboards set together made 42", so we went with the 36"strip and cut a notch in the aprons between the two cupboards so the whole 36" lay flat and centered. This lighting strip makes the "marble" countertop just glow, plates easy to see now in the nook which was very dark previously. Please be aware that this set does not have much of a lead wire. Typically, an electrician will install the junction box way up in the top corner of the inside of a cupboard, or on top of it, before running the lead wire all the way down to the bottom of the cupboard, either inside the cupboard or within the wall. Here, we had to run the wire from the wall directly under the cupboard's "apron," which was not deep enough for a junction box. We just used wire nuts in the back corner of the apron and left their location obvious. Very, very easy for a DIYer.

These are nice due to being 120 volts and no driver needed. Only reason I gave four stars instead of five is the width of the actual LED strip light. It is really wide unfortunately, but understandable due to not having to use a driver. I would recommend these and they are really bright so maybe add dimmer.

Excellent product works well easy install.

Nice bright light, easy to install.EDIT: Very sensitive to voltage fluctuations. Ran them off a true sine wave Victron inverter, and they had a bit of occasional flicker. They appear to be straight AC rectified to pulse DC and don't have any DC filtering included.Seems to have a slight color shading across the area being illuminated, but I've seen this before, especially in bare LED headlamps that don't have any kind of diffuser in front of the LED it self.Otherwise, the light works well.