MAIWO 40Gbps NVMe Enclosure with Detachable Magnetic Fan, Tool Free USB4 M.2 NVMe SSD Reader Full-Aluminum, Support 2280 M-Key, 8TB Capacity, Compatible with Thunderbolt3/4 USB4/3.0/2.0

Why did you pick this product vs others?: I will say the jury is still somewhat out on this, but I really like it. I put four 4TB m.2 drives in it in a RAID 5 setup. I've been using the m.2 form factor for a long time now and I knew the heat would be an issue with the high-capacity drives, so I added some rather husky heat sinks and, following some advice in the other comments here, added an external fan on the top of the case. It's been working perfectly for about 4 months now. The Thunderbolt connection is solid and fast. Look in the other reviews for the Amazon link to the heat sinks and the cooling fan that's mentioned as quiet. It's a minor project to set all of this up and get it to fit inside the case (heat sinks are a tight fit) and you will have to drill a hole for the fan wire to get to the PCB plug. Do all that and you'll be happy.

I tested the MAIWO 40Gbps M.2 NVMe SSD Enclosure with a Samsung 980 PRO 2TB SSD, and the results were impressive. Sequential read and write speeds reached 3793 MB/s and 3432 MB/s, respectively, which is excellent for an external NVMe SSD enclosure. Random read and write speeds were also reasonable, though write speeds on smaller blocks could be improved. The build quality is solid, and setup was straightforward. However, I noticed the enclosure does heat up during sustained workloads. While it didn’t throttle performance in my use case, it’s something to consider if you frequently transfer large files or use it intensively for extended periods. Overall, this is a great product for those looking for a high-performance external SSD solution, but be mindful of potential heat buildup during prolonged use.

Offers excellent value for its price, supporting high-speed data transfer up to 40Gbps and compatibility with Thunderbolt 4/3, USB4, and a wide range of NVMe SSDs. Its tool-free design and sturdy aluminum alloy case make installation and daily use very convenient. However, there is a significant drawback: the enclosure tends to overheat during sustained transfers. Once it gets hot, the throughput drops noticeably, which can be frustrating if you’re moving large files or using the drive for extended periods. This thermal throttling limits the otherwise impressive performance. While the enclosure does feature a grooved design for heat dissipation, it’s not enough for heavy workloads. A better heatsink or active cooling solution would make a big difference for users who need consistent high-speed performance. If you’re looking for a budget-friendly, high-speed NVMe enclosure for occasional use, this is a solid choice. But if you plan to push your SSD with long transfers or heavy workloads, be prepared for thermal throttling. Consider adding an aftermarket heatsink or looking for a model with better cooling.

I like it. Very nice speed. I use it to boot my Mac mini from it and no issues. It gets hot so I use my old intel processor fan to keep it cool. It has been working great so far

This review is for "MAIWO 40Gbps M.2 NVMe SSD Enclosure USB4 Type-C to 2280 NVMe Adapter Groove Heat Dissipation Support Thunderbolt3/4 USB4/3.0/2.0 Tool Free 8TB Capacity Aluminum Alloy Case (K1717)": The drive is supposed to have a Thunderbolt 4 / USB 4 controller. But when connected to Thunderbolt 4 it crashes the computer every time (and causes kernel panics on boot). When connected to Thunderbolt 3 the drive is in the Thunderbolt device tree but doesn't mount or appear in Disk Utility. The conclusion is it only works in USB 3.1 mode or lower. Plus, it was missing parts: The "What's in the box" and "Package Content" both say that it includes 2 silicone pads and 1 aluminum pad. Mine came with 2 aluminum pads and 1 silicone pad. Which, I suppose, is the same total quantity of pads. But extra aluminum pads is not as satisfactory as getting extra silicone pads, since that part is less reusable.

I was not sure about the magnetic lid on this unit, but I love it. It has a really solid feel to it and it stays cool in operation. Another thing I was dubious about was the little rubber plugs it uses to hold the drives in place instead of screws. I find the plugs much easier to use rather than fiddling around with tiny screws. The unit works perfectly both for copying drives and as an external storage unit.

Works great on my M1 Mac Mini and a 4TB Lexar NM790 SSD, get read and write that is pretty much as fast as you can expect for thunderbolt. I only got one thermal pad with this, the listing and manual seems to imply I should have some metal strip and another thermal pad, but didn't have those. Instead I had a spare very thick thermal pad which I put on top to touch the top of the case, and put the included one below the SSD. The SSD I have uses less power and generates less heat than normal so even with one thermal pad it would probably have run fine. Copied 2TB to it already with no issues. The case itself is neat thick metal and opens without any tools just by pulling and still has a snug fit when putting it on, so it won't come off by accident. It uses this annoying rubber screw to secure the SSD, and 2-3 spares were included. Comes with a very short thunderbolt cable, and I replaced it with a longer one.

I'm using Windows 11 with an MSI Motherboard and Thunderbolt 4 connections on the back. Inserted a WD_Black SN7100 2GB NVME. Its working good so far. Speeds are as expected for Thunderbolt 4 on Windows. There is one thing you need to do in order to get full write speed. You need to enable the write cache located in Device Manager > Disk drives > your NVME > Policies (see photo). Otherwise the write speed will be much lower. The cooling fan definitely keeps the enclosure cool but its not a quiet fan. Knocked off one star for that. Otherwise its working and will follow up long term if something happens.

This 40Gbps enclosure is the cheapest available in Amazon right now. It comes with everything you need in the box including a good quality USB4 cable. I read a previous review saying the cable is bad and so I ordered one which turned out to be the bad one. The enclosure is solidly built and completely tool less. I like the locking mechanism and how the cover seamlessly locks with a satisfying click and sits flush into place. I installed a 4TB Crucial P3 Plus with a slim copper heatsink. There is no fan. The SSD is passively cooled. You'd think it will get very hot but not at all. My other 10Gbps enclosures get way hotter than this. Overall a very good enclosure and I'm glad I didn't get the one with the built-in fan.

It worked for couple of months only. Now I have lots of files stored in the disk and absolutely NO ACCESS.

It hits the advertised speed with gen 4 m.2 ssd, without any issues. Just make sure that you install with a thick enough thermal pad (2mm) so that it touches the actual aluminum body. It dissipates the heat well since the case is slightly larger than my other thunderbolt case(s) (Acasis and Orico ). So far, this MAIWO is my favourite also since it doesn't have an annoying fan it's super quiet. Highly recommended!

somebody tried to open the device from incorrect side using some screwdriver or other metal object. Box is in horrible state and was not wrapped in the plastic, which makes me think that the item was not new :( Haven't tested the device yet, waiting for new SSD to arrive. UPDATE: The enclosure works absolutely normally as expected. The only negative is the fact that Amazon shipped the product in such a condition. Have to give a thumb up to the seller as they are very responsive and helpful. I am adjusting the rating to 5 stars as nothing is wrong with the product itself.

Works great, is fast. What I don't like is that the fan is external and needs a 2nd USB power supply