WENICE Sewing Seam Rolled Hem Foot for Sewing Machine,8 Pieces Sewing Machine Accessories of Guide Sewing Foot

Worked beautifully, my machine didn’t have the screw hole in the right place. No problem, I used painters tape to secure it in the right place, which worked even better so I could place exactly where I needed it to line up with the needle. I especially liked having multiple pieces, to try because the fabric thickness effects which one rolled up better!

Before anyone else makes my mistake, note the specifications! The hemming swirl thing is a very specific tool for specific machines. This product page has a couple of different hemming tools and some may work for your sewing machine while others won't! So don't buy it just because someone said "It works for my Singer Heavy Duty!" Think, WHAT works? I have a Singer Heavy Duty (idk what model) and I saw someone say that "it works for Singer Heavy Duty, so I assumed they were referring to the swirl hemming tool. I was wrong. The swirl does NOT work with all Singer Heavy Duty sewing machines. Check out my photos, my SHD does not have screws in front of the foot, it has them on the sides, makes a huge difference. Now the tool itself is splendid, I fanengled it into the proper spot and with some effort on my part in keeping it straight, it hemmed things beautifully! So, it works! IF it works with your sewing machine. Now, I don't want to return it because it was my fault, so I think I will gift it to my seamstress friends who may have different models of sewing machines. :) Long story short, read the description carefully!!!

Didn’t fit my. Machine. Can’t really rate.

Doesn’t fit every machine, but I was able to make it work on my Singer 401a by taping it down where I needed it. Practice on scrap fabric first! I found it worked best if I held my left forefinger at the edge to make sure the fabric didn’t slip out, and was able to hem all 29 feet of the chiffon bridesmaid’s dress from hell without killing anyone.

For the people like me that just assumed it would fit… I have a Singer Heavy Duty 4432 and the screws aren’t in a good position to attach this. I used a strong magnet I had. Look for the strongest magnet so it’ll hold it steady. It might work even better this way since you can adjust it more.

All the reviews I read are for a magnet to make your stitching straight. The product is a rolled hem foot. It says several times in the info that you need to have a machine that has a screw holding your plate down on your machine and that has to be in front of your, presser foot this enables you to attach the rolled hem device to the screw hole and tighten with the screw so it doesn’t move. No magnets are needed. I did not read thoroughly as my machine has the screw holding my plate in place on the back of the needle and that hole and screw need to be in front of the needle so I cannot use this. But it is mentioned several times in the description so make sure you look and see That the screw on your machine is there and is in front of the needle by at least a half an inch so you can put the hemming device into the screw hole and then screw it on tightly

It will not connect to my sewing machine. BE sure to read all of the product description and check your machine(s) before buying. I think they would work well, but I can't use them on either of my sewing machines.

There were no instructions included, so I googled the product. My foot plate did not have a screw to secure the roller pressure foot, so I taped it in place with painters tape. To my surprise and pleasure, it worked great! I made barkcloth tablecloths, and the roller foot worked well with this heavy fabric. Even though I had to use tape, I am very happy with the result!