FPVtosky Case for DJI Mini 4 Pro/Mini 3, Double-Layered, Waterproof, Accessories for RC/RC 2/RC-N1

I recently acquired the DJI Mini 4 Pro as my first ever drone - an incredible piece of kit that has actually encouraged me to get outside more for the first time in over 3 years, and to get back into photography for the first time in 5 years. As many reviewers and owners have commented, the official DJI carry bag for the Mini 4 Pro is very cramped. It feels like you've got to squeeze things in and hope the zip holds. I trust the bag, but I also want to be able to carry more with me. For example, to maximise my flight time, I like to take an Anker power bank with me, USB-C cables, and various accessories - the official bag doesn't offer nearly enough space for this. That's where this case enters. Other reviewers of it have mentioned that the bottom and top of theirs were both 'dented', or curved inwards. This was also true with mine, but this appears to have been caused by low pressure inside the case (mine was vapour-locked when it arrived). After a few days, both sides have flattened out. Some reviewers also mentioned that their drone 'rattles' a little bit and I could say the same, but I opted to pad mine using a cloth so it's secure in place. As you can see from the photos, there's plenty of space inside. Inside mine, I'm able to fit the Mini 4 Pro, its battery charger, the RC2 controller (with a cover still attached), a beefy Anker power bank and USB-C cables, the Freewell filter pack, a lanyard for the controller, a fast charger (designed for mini 3 pro, but suitable for mini 4 pro if you urgently need some quick charge), some cleaning cloths, silica gel packs, and a ziplock bag (located under the controller). This means that I'm even prepared for drying it out in the eventuality that the drone gets caught in the rain. Something to be aware of - the larger iPad Pro 12.9" is a little too large to fit inside the inset area in the bottom level of the case. A smaller iPad would definitely fit though. A 14" M1 Macbook Pro is only a couple of millimetres too wide to fit in the case, but a slightly smaller laptop would fit inside. This case is significantly more bulky than the original carry bag, but that's a trade-off that I'm generally willing to make until DJI realise that they should offer better options for carrying their drones. Overall, a very good case and well worth the investment.

This hard case from FPVtosky is exactly what I was looking for. It’s compact, lightweight, and fits my Mini 4 Pro and accessories perfectly. The interior is well-designed with snug foam cutouts that keep everything secure, and the hard shell exterior feels durable enough to handle travel without any worry. I also really appreciate the waterproof and dustproof design—peace of mind when I’m out shooting in unpredictable conditions. The handle is sturdy, the latches close securely, and it even looks pretty sleek too. Highly recommend this if you want reliable protection without bulk. Excellent value for the quality.

I bought this drone case for my DJI Mini 4 Pro close to the end of last year and when I cycled to an area 5 miles away from my house with the case on my bike using the shoulder strap, it had to go through rain. I am happy to say that this case's contents came out perfectly dry and fine for use. The hard nature of the case means that I could pack it in the car and put my college bag on top of it (pretty damn heavy) and it was completely fine. Haven't ever had to use the pressure valve it has in the middle of the handle but I'm sure that if I ever do, it will be perfectly fine. I would definitely recommend this case for anyone else who wants to secure their drone. I also use the padlock-size hole to stick a small padlock on it so it can't get stolen, if you properly want to secure it, I suggest getting a small combination padlock rather than a cheap key-lock like the thing I have. The inside of the case has custom-cut foam for everything in the drone fly more kit (inc. space for 4-6 batteries with one battery in the drone). If you want a decent drone case for your DJI Mini 3/3 pro/4 pro, GET THIS ONE! It is amazing!

Good quality box, fits the mini 4 pro perfectly. offers great protection, very light weight. very functional.

Well made case with good quality accessories, drone, controller and batteries all fit snug in ready to take flying

Really nice heavy duty care. my drone gets thrown around a little in this case and it lives every time so great protection. the comparment under is also great to hold an 11inch ipad and a landing matt

Sturdy well built with space for drone and accessories all held in individual padded sections. Even space for landing pad and iPad. Highly recommended.

Really well made case DJI mini 3 fits perfectly as well as battery case and loads of room for more very good

Prodotto conforme a quanto dichiarato dal produttore, perfetto e funzionale per DJI mini 4 pro more combo. Per il momento sono soddisfatto

Allt var perfekt..

Mooie stevige koffer om je drone in te doen. Nog een extra vakje om andere lensjes of kabels mee te nemen.

This is my second case from this brand. I had one for my last drone, and it was perfect. This one is as well. It holds my Mini 4 Pro, controller, everything that came with the Fly More Combo, charge brick, neck lanyard, ND filters, strobe light, landing pad, and a few other assorted odds and ends. Everything fits snugly in place, with the exception of the controller. There is just a hint of extra space between where it sits and the upper foam. I would have preferred it to be raised up just a tad, with a half inch of storage underneath it, kind of like my last drone case. Aside from that little criticism, I can’t find anything wrong with this one. It’s waterproof, dust proof, and at 185lbs I can stand on it and it holds its shape. Nothing feels cramped, everything is easily accessible, and I really appreciate the little cord handles to gain access to the bottom storage. That was my one gripe about my last case, having to pry the top shelf out with my fingers.. Overall, I’m more than pleased with this case. 9/10, in my opinion. If the transmitter sat just a bit higher I’d give it an easy 10/10. I’m looking forward to enjoying the ease and safety this thing will provide. Would definitely purchase again if something happens to this one. Also, I see others are mentioning that their case lid and/or base is warped, and as you can see in the picture, mine does not suffer from this issue. My lid closes cleanly and securely without putting pressure on the drone or anything else inside. Other pictures validate the issue, but I’m submitting one to verify that it is not an issue with all cases. Perhaps just an early batch, since these are just starting to ship and be delivered. YMMV

軽くて丈夫なケースです。機体・送信機などその形にくり抜いてあるのでぴったり収まります。 送信機にストラップ用の取り付け金具を付けていますが、ケースの一部をカッターで削ってきれいに収まりました。 良いところ：送信機のスティックを付けたまましまえる。ケース自体軽い。肩掛けストラップは何気にに便利。二層構造なのでスペアパーツが下部にに仕舞っておける。 悪いところ：今のところ何も思いつきません。