Syncwire Cell Phone Ring Holder Stand, 360 Degree Rotation Finger Ring Kickstand Polished Metal Phone Grip for Magnetic Car Mount

Works great and is very sturdy. Plan where you want to place it because it sticks really solid. I have mine up high for hanging on my finger or it can be mounted low and used as a stand. Very versatile. I actually want two on my phone. Lol

How did I live this long without this product?! This simple little ring has completely changed the functionality of my new iPhone. I love the new phone, it has a huge screen, it has amazing cameras, and so much more. The main issue is that it's physically huge! It's massive and quite difficult to use with one hand. It's easy to hold but when it comes to typing with your thumb on one hand there's a very real risky feeling that the thing is going to slip from your hand. My wife has one of those pop things on her iPhone X case and she sort of likes it. She likes it because it makes it more secure in her hand but she doesn't like that it's plastic and not really confidence inspiring when holding it. Once she put my much larger phone in her hand and used this ring she said "order me one now". Seriously, it's that good. The back of the ring comes with a 3M adhesive circle and says to wipe clean the phone or case (and it comes with an alcohol pad which is nice) and then peel off the sticky backing and hold for 10 seconds. Well, as you can see from the picture I did more than hold it for 10 seconds. I used a vice grip to hold that sucker on there for a few minutes as tight as I could squeeze that thing. Is that overkill? Maybe, but I wanted to be sure that if this thing ever lost its hold on the phone it wouldn't be for any mistake that I made. I love that this is made of a hard metal and not plastic. As I mentioned before that is one big plus that my wife loved instantly. It really feels solid and sturdy. The ring itself rotates endlessly 360º around the base that sticks to the case allowing you to hold the phone in either hand however best feels comfortable. It's important to note that the ring does not "spin" as in fast. There is some tension behind the ring so you actually have to raise the ring at a 90º angle to the phone and gently rotate the ring gently so as not to rip the dang thing off the phone/case. I don't know if that would happen - I'm not disparaging the 3M sticky - I just don't want to test it and find out. But again, it doesn't just spin around the base like some spinner toy, you actually have to position it where you want it and it stays firm. When the ring folds down it is only very slightly more thick than the extrusion that goes around the camera housing portion of my particular case. Of course all cases very so keep that in mind. I have an extremely minimalist and thin hard case that is more form over function but still keeps the case secure and allowed for a very good adhesive surface for the 3M sticky. When the ring is extended it can be used as a kickstand for the phone itself as you can see from some of the pictures. Of course I had the phone out of the case to take the pictures but rest assured that it functions flawlessly with the phone in the case as well. I installed my ring a little south of center on the phone as that felt more comfortable in my hand to use. Even at this slightly lowered location it functions beautifully as a kick stand for the phone. Seriously, there is truly nothing I don't like about this ring. I hope that the 3M sticky pad holds firm for a long long time because this is the best thing I've bought in a long time. Well, best two thing since my wife demanded I buy her the rose gold version for her phone now too! Just buy this! You won't regret it.

Love how slim it is. Only slightly thicker than the camera bump itself (note I also have a phone cover so it might actually be thinner than the camera bump). Its perfectly sized for my tiny hands; I put one finger in through the hole and 1 or 2 fingers around it, and that helps to keep a solid grip on my oversized phone. Been using for almost 2 years now and its still going strong. Have not had any issues with it unsticking. The hinge to raise and lower the ring gets looser after usage, but it hasn't given out for me yet. The ring can be easily oriented to any direction without much effort, however there is enough friction that it does not slip. This has the added benefit of serving as a simple pop out stand. Not super stable since the point of contact is just the tip (also depends where you attach it to your phone) but works great to prop up my phone on a table or airplane tray.

Summary: Have had this anchored to the same phone case (polycarbonate shell material) for barely over a year now, and overall has been a decent experience. The holder does its job well for the price, however does experience some loosening with use. Design: I found that the design is slim and works well for easy pocket insertion, and the contoured lip of the ring makes opening it with one hand feasible. Comfort is decent, with no sharp points on the ring/base, however do note that the ring is a tad on the thin side if you are planning to use this as an accessibility aid (I personally find it a bit uncomfortable when dealing with autoimmune flares, but generally have little issue). The metallic backing performs great in mounting to magnetic mounts, which has survived several months of car trips while mounted without any unexpected falls. Installation: I highly recommend taking taking a moment to trial and error the placement of the holder before attempting to secure it with the adhesive, in order to find a comfortable/balanced sweet spot for holding/mounting your phone. This is especially important for the more minimalist car magnetic mounts, since the phone will pivot if not balanced or secured with additional rotational support from the mount. Durability: The adhesive backing has maintained a solid connection with the case, and has not slid from its initial placement position. Cosmetically, there is a bit of surface wear on the back plate and ring, however nothing that wouldn't be expected considering the use it endures. After roughly two months of use, the body/ring became fairly loosened, resulting in the ring being less stable and the overall design having a bit of rotational wiggle from the base, both of which progressed slowly in the following months of use. Despite this, the design still worked as intended, however became far more prone to giving out when used as a kickstand for the phone. Today the holder actually unexpectedly separated in two halves, with the outer plate holding the ring coming disconnected from the adhesive base plate. With a bit of trial and error, I did manage to reassemble the halves by firmly pressing them together and rotating in opposite directions in order to lock the internal joint peg/slot. Oddly enough, this seemed to resolve the base plate wiggle that had developed. Despite this, I do have the rating set to 4 stars, since the unit has seen substantial use and had loosened a fair bit beforehand.

Je les utilise depuis des années, il ont résisté, sont toujours collés et bien robustes. De plus les rotations fonctionnent toujours, dans tous les angles, et ne faiblissent pas à soutenir mon GALAXY NOTE (pourtant grand et gros téléphone) quand je regarde une vidéo. BRAVO TRÈS BELLE QUALITÉ , et d'autant plus que d'autres anneaux achetés depuis pour mon téléphone PRO ont eux montré des signes de faiblesse ! => Alors pourquoi... et qu'est-ce qui m'a fait acheter autre chose me direz-vous ? ? Simplement car je ne suis pas FAN des gros logos et des marques..., et c'est donc le seul HIC de ces anneaux... il y a un GROS LOGO << S >> sur le rond central. Plus discret et plus élégant et c'était un 5 étoiles partout !

Der Ring hat für mich genau die richtige Grösse, nicht zu gross. Er klebt superfest. Man kann den Ring hochklappen und so das Handy längs oder quer aufstellen. Ausserdem lässt sich der Ring auch in alle Richtungen drehen. Er ist hochwertig verarbeitet und sieht super aus!

Stupendo e di qualità !!!

The Syncwire Phone Ring Holder has proven to be an excellent addition to my phone, combining sturdiness, reliability, and a stylish design for an overall outstanding experience. Pros: Sturdy Build: The phone ring holder exhibits a robust construction, providing a secure grip and effectively preventing accidental slips or drops. The durability of the design instills confidence in its long-term reliability. Secure Adhesion: The ring holder has adhered to my phone without any issues, showcasing strong and reliable attachment. It stays in place even during daily use, offering peace of mind regarding the safety of my device. Stylish Design: The design of the Syncwire Phone Ring Holder is not only functional but also aesthetically pleasing. Its sleek and stylish appearance adds a touch of sophistication to my phone. Versatile Usage: Beyond its primary function as a phone grip, the ring holder can also double as a kickstand for hands-free viewing. This versatility enhances its overall utility. Conclusion: The Syncwire Phone Ring Holder has exceeded my expectations, providing a secure and stylish solution for a better grip on my phone. Its sturdy build, secure adhesion, and versatile design make it a top-notch accessory. I am thoroughly pleased with the performance and would highly recommend this phone ring holder to others looking for a reliable and stylish solution to enhance their phone handling experience.

Syncwire phone rings are superb! I was introduced to phone rings when I got one free with a repro snes controller (see photo). Looking back now, it was chunky, with a metal ring attached to a plastic base. I was not sure I would keep it at first given it's thickness but I ended loving it's usefulness. However, after 6 or so months the ring became loose so was useless for propping my phone. So I looked around online and came across these. They are worth every penny and so thin I don't feel it in my pocket! You can tell it's built well and will last. I did read complaints about the adhesive but I have found it to be excellent. Make sure you apply firm pressure for a bit (best to attach to a phone case before adding you phone) and give it time to stick well. Check the surface is clean too before applying of course. You get extra stickers too but I didn't need them. I can't be happier with it and such a step up from my fat freebie bless it haha