GTR Simulator GTA-F Model Racing Cockpit | Silver Frame with Triple/Single Monitor Stand | Adjustable Leatherette Seat | Stable & Ergonomic | Compatible with All Wheels & Pedals for PC & Console

Let me start by saying I LOVE this setup. While it is not perfect, it is very close. Let me start with the cons: -Bolts missing for mounting the seat. No big deal because they are the same as the rest of the frame (more about that in a minute) -Monitors not close enough. I am running a single 27" monitor. While it is usable to be sure. I would like it closer. This is a minor issue because I use an Oculus Rift for my racing. -The picture shows that there is a shifter mount on both arms. This is not the case. There is only one, though it seems like you can put it on either side during assembly. -The welding. I am sure it is more that solid. See my further comments, but the tacks seem just a little sparse. I have not doubt it is solid, I just had to find SOMETHING to grumble about. For the pros: -This thing is SUBSTANTIAL!!! The steel tubing is thick. I bet you could park a car on it. -Very stable. It is rock solid when assembled. -Over engineered. Where anyone else would use a single bolt with a knob, this has 2 cap bolts,one on either side.. They are not small bolts either. Best guess they are M6. This is where I have the slightest concern about the welding. The thread spacers they use are only tacked in 2 places around the base. I would have liked to see a bit more complete job. -No bent tubing here. Everything is cut and mitered. The welding here is no issue. They look great. Conclusion: If I were building a race center for the public, I would use these seats. The price for value is off the chart. I will be doing a little custom modding (as I tend to do) to bring the monitors closer and make some sort of interchangeable controlled base. I do switch from racing to space to flight sims. I may even use it as a general workstation. This should be relatively easy again because everything is square tubing. Final thought... I could not be happier.

It looks a little taller in the pictures. Didn't think I was gonna have to get so low to get into the rig. But other than that solid rig for my DD moza r3. Very sturdy. I also could not mount my pedals anywhere on the pedal plate. Not matter where I put the pedals on the adjuster. Used a drill made slight modification and I couldn't be happier with this rig.

Active sim racer here. I've done a ton of research on cockpits, both static and motion. I've had a Playseat in the past, built my own PVC cockpit. I had originally purchased another cockpit on Amazon here but when the time came for release and shipping, well, it never was shipped. Then got a notice that the shipping date would be 'when item was received'. Meaning, I had $500 tied up for nothing until God knows when. So I got a refund, did more research, talked with a friend who's also a sim racer and an owner of a GTR simulator. He highly recommend GTR. So I pulled the trigger once again and my seat was shipped out very soon after purchase. The big box arrived with no problems in the shipping. It was very well packaged. Several boxes inside the big box and ALL components were carefully bubble wrapped. I was actually surprised and very pleased. I got the triple monitor although I'm using the Oculus Rift. I have a 40" HD monitor and the two side monitor holders I'm using to hold my sensors and speakers. Which works out perfect. The structural design is great. It is extremely sturdy. No wiggling with this unit. The functional design, personally, I would have made some changes. Like a keyboard tray addition(swing away of course), work station platform under steering wheel, more incline in the foot pedals and a bit 'softer' or cushionee seat(hey, I'm 60 yrs old). I need more cushion that most folks. ;) But overall, I'm very well satisfied with my purchase. I highly recommend this sim seat and this company. Our charity, Racing Dreamz, will one day need another sim seat, I will get it from Abtivan Corp. Good people. :)

The frame is sturdy and the measurements provide a comfortable experience. Also, the seat is very comfortable and provides good support. However, I have three complaints: 1) Most importantly, the tighteners on most of the components are horrible. You will struggle to keep the important ones tight on items such as your shifter, steering wheel and even the pedal plate. I had to make wooden add-ons just to keep the shifter and steering wheel relatively stable. But you will still find yourself tightening, for example, your shifter in the middle of a race (thank God for the pause button). Finally, unless you have an entire room dedicated to your racing sim and lots of space, you will find it extremely aggravating to deal with the pedal plate. The narrow angle makes it nearly impossible to get your hands in to secure your pedal stand and to secure the plate to the sim frame. 2) As others have mentioned, the assembly instructions are next to worthless. You will figure out how to assemble the kit, but you will swear and curse the whole time. 3) The monitor stand seems rather far away. Some people might like it, but I believe many would be thankful to have the option of bringing it closer. I haven't owned another simulation frame like this and can't compare its qualities for the price. So perhaps, it rates a four. But the constant loosening of tighteners pushes me back to three.

3画面のシミュレーターを安く入手するにはこれしかありません。他のものは、倍ぐらいの値段です。 座面が少々柔らかすぎるのですが、座面を支えているバネの上に厚めの雑誌を入れると使い心地が抜群に良くなります（これは自己責任でお願いします）フレーム自体の剛性はこれで十分かと思います。黒いネジが飛び出るので、気になる人はキャップとかをつけた方が良いかもしれません。

Very sturdy and comfortable. Using a 32” monitor. Thank for the service. Will buy again

The product arrived within the time frame expected. Four of the parts where already assembled (incorrectly), possibly indicating that my new product that I paid over $700 for was previously in the hands of someone else. I was not able to start the assembly because of this issue. Contacted the company, and they IMMEDIATELY remedied the problem by sending me new parts. The condition of all the parts looked excellent, and the packaging it all arrived in, although minimal, sufficed. Assembly was aggravatingly difficult due to incorrect steps shown in the manual. But with patience and common sense, anyone, including myself can get through it. Neither the rig or the driving wheel (Thrustmaster T300RS GT) comes with mounting screws, for obvious reasons, so I had to do some research to find out that I need M6-12mm screws to mount the pedals. My wheel didn't line up with any of the holes so I had to use the clamp it came with. My monitor has M4 holes but the holes on the monitor mount are M6 holes. So I have to work all that out. So, if you buy this product I strongly suggest you find someone to help you assemble it. It's a two person job, if you want to eliminate the frustration. Make sure you bolt the seat railing to the frame BEFORE you bolt it to the seat. The manual gives you the wrong step, so I found out the hard way. Other wise, it is a solid product, and despite the original error the company dealt with my issue promptly.

Le banc est très bien La distance pour les pedal est parfait Assez solide pour un direct drive Par contre l'écran est trop loin et pas assez de place pour un shifter et handbreak Après quelque petite modification Il est 10 sur 10

Fantastic value