FENRIR Motorcycle Handlebar Bar End Mirror Adapter For 2017-Now Bonneville T100 T120 Bobber Rocket3 Speed Triple Speed Twin Street Twin Thruxton1200 Trident660 Scrambler1200 Scrambler900 Street Triple

I recently installed the FENRIR Motorcycle Handlebar Bar End Mirror Adapters on my 2024 Kawasaki Z900, and I have to say, they exceeded my expectations. Initially, I was worried that they wouldn’t fit or that the installation would be a hassle, but I was wrong—they fit perfectly and took less than 10 minutes to install! 1. Perfect Compatibility with FENRIR Mirrors: I bought these adapters specifically to pair with FENRIR’s bar end mirrors, and the fit couldn’t have been better. They lock the mirrors into place securely, without any wiggle or movement even during long rides or when hitting bumps on the road. The compatibility is spot-on, and it feels like these adapters were made to work seamlessly with FENRIR’s mirrors. 2. Quick and Easy Installation: I was pleasantly surprised by how fast the installation process was. I had both adapters and mirrors mounted and adjusted in under 10 minutes. The adapters screwed into the handlebar ends effortlessly, and the provided hardware made tightening everything down easy. No need for any modifications or complicated adjustments—it was straightforward and hassle-free. 3. Solid and Durable Construction: The adapters are well-built, made from high-quality materials that feel sturdy and long-lasting. They have a premium finish that matches the mirrors perfectly, giving my bike a clean, integrated look. After several rides, I’m confident they’ll hold up over time without any corrosion or wear. 4. Secure Fit and Vibration Reduction: One of the concerns I had was whether these adapters would hold the mirrors steady at high speeds, especially on highways. But once installed, the mirrors stayed rock-solid, with no loosening or vibrations affecting the clarity of the rear view. The adapters ensure that the mirrors are perfectly aligned and don’t budge, giving me peace of mind during every ride. 5. Affordable and High-Quality Solution: For anyone looking to install aftermarket mirrors, these adapters are a must. They provide a secure, precise fit at an affordable price, and the ease of installation makes them a no-brainer. You get a high-quality, durable product without breaking the bank, which is a huge plus. Final Verdict: The FENRIR Motorcycle Handlebar Bar End Mirror Adapters are the perfect addition for anyone using FENRIR’s mirrors. My initial worries about fitment were completely unfounded—they fit perfectly and only took about 10 minutes to install. If you’re upgrading your mirrors, these adapters are a must-have. Highly recommended!

To install, you will need to remove the factory bar end weights. They’re held in with thread locker, so make sure your bike is firmly stood up, and get ready to apply some serious torque. Have a friend hold the bar and bike up if you can. Make sure you don’t drop your bike! Once the bar end weights are off, use a bit of thread locker on the bolts and put these on. Give it a good bit of torque, and again, don’t drop your bike! Once it’s on, you can mount your bar end mirrors on the slots. Easy-peasy!

The compatability of this item was incorrect on Amazons part. The company product description said that it would fit and it did. Amazon said it wouldn't. Glad I bought it. Worked great!

Fit perfectly. I did reuse the original handa bolt it was a better fit. This is the adapter you need for the 2025 Honda Rebel 1100.

Great for adding bar and mirrors! Because they aren’t waited, there’s a little vibration which blurs the image of the mirror when RPMs are high

If you want to save money and get these instead of the RhinoMoto ones, do that. Quality material with no complaints. Installation went smoothly with some loctite. Any bar end mirror that you are able to open the clamp all the way on, will work for these adapters.

This comes with a plastic spacer for the Hayabusa gen 3. The spacer needs to be 1.5x longer and made from cnc metal like the adapter is. Otherwise the plastic spacer crushes against the grips making them bunch up. The stud ends up being to long since the spacer is t long enough which then in my case became gauled into place making it almost impossible to remove. Having to buy a magnetic induction heater for $189 to heat up the bar to expand to hopefully get the stuck stud removed. I was hopefully able to remove most of it but it’s stuck now with about 3/8 stuck in the bar. Only thing I can think of is when fighting up the stud the first time that the stud ended up cutting new threads in the bar which then left shavings in the bar locking up the stud. What a pain im the butt and expense to remove. Do not recommend since it’s a plastic spacer not cnc metal. If you use this then order separate shorter 10mm Allen head studs.

Took a shot on these to use with a different mirror brand, really didn't expect them to work since they're advertised as not working outside of their product. Well they did and I'm happy I decided to give it a try.