Spoke, Wraps, Coats, Skins, Covers - Single Color - 72 Spoke Dirt Bikes - 9 COLORS

Kind of tricky to install, until you get the hang of it - makes your thumbs hurt for sure.These ones match my graphics better. =)The cheap 1s ~ 10 bucks - on right - I returned because they were more pink-ish, than Purple, like they were supposed to be.

PIC ADDED .... So I just got them installed and I gotta say it makes the wheels look SOOOO Much Better!!! I know there is zero purpose in there other than looks but to many guys though we know our bikes are a tool we like our tools to look good and not like a dump of a dirt bike!Install was fairly easy ... Just gotta use a large pair or scissors or trimmer tools to cut and once you have one you can use that as a template to cut the others (until you move to a different section of spokes then remeasure again as they are not all the same).Once cut to correct length I just pulled back one end (the end that goes towards the inner hub) to get it to slide onto the spoke, then slide it down towards the hub and it pops right on. Be sure to make you cut end the side towards the inner hub and the fresh uncut end be towards the wheel itself for a cleaner flusher look at the wheel spoke end.The spokes in spots are tight so it's a little tough to get em on the spoke in between each other but not to bad. The front rim is easier and the spokes have a bit more give so start there first and then finish on the back tire.I have not taken the bike out so I don't know how well they will hold up ... if they are bad and damage easy or fall off I will be sure to come back and update my review (if you do not see an update all has gone great). They do scratch easy that's for sure ... I can just run a nail down the plastic and see a deep scratch so I hope they don;t look horrible after a few major dessert and rock rides.I also to a pic of the front rim on my 2006 KTM 450 EXC to show it looks with black on a regular aluminum colored rim! I wanted to some day get black rims but with this add-on I really think I am good now and kinda like the black tire, orange rim trim on the aluminum look with all black spokes now!!! :)They come in a nice bag all rubber banded up with a Bykas sticker to add to the sticker collection on the tool box.I would have liked to have seen more then only 1 extra spoke warp per size .... I ended up having to use a shorter cut spoke wrap cause I totally messed one up and then cut one a bit short ... so I had to use the short one unfortunately. If nothing else make it a couple 3 or so extras if possible for those new guys making mistakes more then once having never done this before.For the price they are great for sure and add a Killer look to a bland looking rim overall.I would recommend them to anyone wanting to spruce up the look of their bike! Thanks Bykas.

I ordered a set for my 2015 KX450F. You will need a couple small things. A pair of needle nose pliers. Some people will use soapy water on their spokes what I did was genius really. I sprayed wd40 on a cloth shop towel and took my time to give each individual spoke a good coat of this protecting do it all fluid before installing the wraps. It also helps slide the wraps on easier if you do not get it all over your hands which is why only a thin coat is necessary. The wraps will most likely be a little long so make your first one a measure make it perfect so you can cut all the rest matched to it perfectly. Then put some music on and take your time put the bike on a bike stand I kept my wheels on and just spun as needed and in about 2 hours give or take depending on how patient and good you are. They look really nice and with the wd 40 as sealant UNDER them I should never have a rusted set of spokes. I do not believe they should hamper performance but I will be going for my first ride with them on in a few days and can update then. Really for the price it dramatically changes the look of your machine and is that added touch of bling without doing crazy stuff that can ruin it like plastic dip or painting. The only thing that could be better if you know a good powder coating place that will hook you up. This is a cheap but dramatic LOOKS improvement. It looks great on a newer machine with graphics and good plastic, I doubt it will help an old beat up machine so just being honest. Keep your bike clean a beater means you don't care about your bike, just sayin.

They were a real pain to put on my KLR650 (17" rear, 21" front), although the instruction videos made it look so easy... However now that they are on, they look awesome. They look way better than my old corroded spokes. It took a couple of hours to get done, and my fingers are sore. I installed them while the wheels were on the bike, which probably made it a little more difficult. Used Simple Green to clean the spokes before hand. Used my teeth to pry open one end before installing. Had to use a screwdriver to use as a wedge/lever to gain space for the very tight overlapping places, had to use it for every spoke on the back wheel. A little spit for lubrication in the tight spots also. I just snipped each one as I went along instead of creating the "template" and pre-cutting each one. Once you get into a rhythm it goes faster, but it's still a little hard on your fingers. Love the look, we'll see how they hold up!

Great quality, hard to put on the front of my drz400sm, but not because of the quality of the cover it’s just a pain to do on the front. The back went on very easy. They look great!

These are a great way to accent the color of your bike. The color was great, but they are a little hard to put on. I recommend taking the wheels off your bike and cleaning them very well prior to installing these, it makes it much easier. Fit my 2000 CR125 with a few spare in case you mess up. Short set is for the back wheel, longer set is for the front.

these things are great!!! kids LOVED them on their bikes....pain in the butt to install on a little KLX110 because the wheels are so small...but got them done, and also got them installed on my daughters TTR125 and they look GREAT!!! they rode the crap out of the bikes, crashed, jumped, rode through mud, and the covers held strong!!! i will be ordering another set for my WR250F soon! thanks!

These things are great, pretty good quality took about 30 minutes to install. On smaller wheel diameters you might have to loosen the spoke a little. I only installed them I on my inner spokes, didn't want to them to overpower the over all look I'm going for. I'll have a pic soon. Debating on using a black on my outer spokes. This product adds little or a lot of color to a boring wheel. Bykas knows what they're doing.