ATOLS Upgraded Plastic Welder, 1000PCS Staples, Pure Copper Transformer, Rapid Heating, Plastic Welding Kit, Hot Stapler Kit, Plastic Welder Gun Kit, Car Bumper Repair Kit, Plastic Repair Kit

Works great. Takes a few trial runs but once you get the hang of it you see what a great tool it is. Feels sturdy and gets to working temperature in seconds.

It works exactly as intended. I've used it to repair thin plastic without issue.

Been meaning to pickup something for repairing plastic parts that break. Sometimes more then just some glue is needed so having a way to reinforce cracks and breaks was definitely necessary. Tested this on arrival on one of those tabletop blowmold nutcrackers from walmart. At some point the head got broken and had a large crack going through it. Pressed a coil into the ends of the gun and pulled the trigger. Was hot enough within seconds to melt the plastic and seat the coil into the broken spot. Can easily get hot enough to go right through. After releasing trigger quickly cooled and easily able to pull the gun away from the coil leaving just the prongs sticking up. The pair of snips that come with the kit are a bit on the cheap side and struggled to cut the protruding wires leftover. Tried using the included breakaway knife to trim away some extra plastic, but the knife was very cheap and flimsy feeling so after failing to scrape any plastic gave up. The case is functional, though the hinges for the lid that holds the coils/staples easily pops out of the main part of the case. Easily fixed with a couple drops of superglue to hold it together. Overall. For a quick easy to use staple heater, definitely worth the price. Not the highest quality in the world and isn't going to last forever, but for occasional use and repairs will work perfectly. Definitely recommended for the home hobbyist.

It works well and is rather easy to use. There are videos online showing how to use it. The staple heats up fast (turns orange/red) then you lightly press it on the piece you're working on and it quickly melts into the plastic. Let go of the trigger and after about two seconds pull the gun off the staple. Cut the ends of the staple off with the included wire cutters. So fast and easy. I fixed two broken spots on a plastic radiator shroud along with the tab that secures the headlamp assembly to the car.

This tool worked remarkably well for repairing cracks in the plastic hood of my lawn tractor.

Everyone needs this in their tool cabinet. Super easy to use and essentially makes torn or broken plastic back to its original strength. Love this

The first step to using this item is to remove the yellow handled wire cutters and throw them as far as you can. Order some quality wire cutters. The staples included work well and can be bent for applications like dashboards where the tool angle is inadequate.

This tool works as advertised but you MUST be aware of its power and its limitations. When working with thinner plastics (1/16th-3/32" or so), the heated staple will go right through the plastic and you'll find the tool resting on the surface of the part you're trying to repair. If you act quickly you can pull the still heated staple back through the plastic, twisting it slightly to seat it, then remove the heat. I've been told the twisting motion is the key to making a good repair in any thickness of plastic. Now the fun begins: the protruding ends of the staples must be cut off flush with the plastic surface so you won't be hurt by their sharp ends. The "flush cutters" provided in the kit are a total joke-I couldn't get them to cut the staple ends at all, let alone flush to the surface. I now use a quality pair of REAL flush cutters to deal with the ends, and you can also remove them with a grinder or Dremel tool with a stone installed. Overall this tool is a pretty good value if you don't count the cutters or cheesy plastic case, both of which can be swapped out for better storage and use. Then again, at the price-point this tool comes in at, and not knowing how long it's going to last, you can always buy another one and not be too far in the hole.

La pistola y metales muy bien, pero las pinzas si les falta mejorar la calidad

Very good product 👍

Great investment

Totalmente satisfecho con la compra, muy funcional y práctica!

Perfecto para el trabajo