PAUTIX COB LED Strip Lights 2700K-6500K CCT Tunable White UL-Listed Dotless LED Lights with RF Remote,16.4ft Super Bright Dimmable 24V Tape Light,for Under Cabinets Bedroom Kitchen Office Lighting

This product was a replacement for an older LED strip I had installed above and below my kitchen cabinets. The old one I had was not COB and you could kinda see the individual LEDs on the wall above and below my cabinets. This one, however, is great. It’s just a solid, clean light that shines great. The controller works flawlessly. I installed the power plug in the cabinet above the microwave (same outlet the microwave is plugged into) and have the RF receiver sitting on top of the cabinets. I had to extend the power wire so I could get the strip to start at one end of my cabinets, but that was a very simple step of splicing in more wire. This also allowed me to have all the wiring and components for this LED strip to be hidden out of sight. The lights get very bright and I like the fact that you can dim them and change the color temperature. So far, the adhesion has been great. It is 3M tape and hasn’t fallen off like my old one did. One thing I noticed that was a little disappointing at first though, was that this is not a solid strand of LEDs. The strand I received had a lot of places where multiple strips we’re soldered together. This worried me at first, but the solder job they did was great and it had zero effect on the lights. No dark spots or issues with the operation. All in all, this was the perfect strip for my application. If you have a little bit of electrical know how and can solder, you can make this fit your needs well.

Better than I expected - colors are great, no gaps in lighting etc. Easy to install on an acrylic sign I fabbed. Great product!

I ended up coming back for two more sets of these. I love how many dimming levels there are and I switch through them often depending on what I’m doing. These lights look good on their own but I also got diffusers for one pair and it really levels up the aesthetic.

nice lights. very fragile!!! i have purchased a few times and twice, the strip got a small kink, and immediately knocked out a section of lighting. the other knocked out half of the length. I have purchased other brands that were much more durable when it comes to installing. ALSO, the 3 pin connectors are als very touchy, if strip gets moved at all, the connector loses its touch points, and can cause outages. be careful!!!!

I purchased these lights for a home install of a book Nook surrounding a tv. I purchased the driver and controller separately. These lights worked great. There was no flickering and installation was not an issue. They are extremely good for the price and for the easier install, you really can't go wrong. The only issue is that they are not a cut anywhere LED strip. They are almost an inch between each connection point. Thankfully, almost all the installation points for my setup were within half an inch of a connection point so there isn't any gaps in illumination. I highly suggest getting connectors and not soldering to these pads. They are extremely small for the white balance and color temp pads. Unless you are using good soldering equipment, you're better off getting the splice connectors. The controller I used had no issue adjusting the color temperature and the brightness of these over the 32 ft on eight separate strands of LED. As of now, the LED adhesive backing has held up extremely well. I highly recommend cleaning the surface you intend to set these on before removing the adhesive backing. Over time, I expect the heat of the LED is to you where out the adhesive but as of now, I have seen no delamination from the surface they were installed on.

I bought these LED lighting to replace my old lighting that I used when I installed the kitchen 35 years ago. I installed there LED strip lights and I am very happy with the results. The color temperature is adjustable from 2700k to 5000k and also dimmable.

Well, on mine, the remote controls stopped working. So, I went back to the website and saw that they had a wall dial that has also a Bluetooth, Wi-Fi and comes with remote. The remote that came with this new unit works to turn it off and on, but the the other button, such as brightness and dimmer switch and all that, don’t work. I’ve got to use the Bluetooth app in order to dim it or make it brighter. I just don’t see why they don’t test this crap before they send it out. other than that, the lights seem to be getting dimmer as time goes by. like, noticeably dimmer. I’ve had them for probably two or three months, and I feel like I would have to buy five or six more of these light strips to be as bright as they were in the beginning. They don’t flicker and that’s nice, but they are a little bit on the expensive side. I would very much like for them to replace the remote control so that I can get one that works, but I don’t expect it. The truck the return window has closed, and I’m sure that they don’t give a damn if they’re crap didn’t work or not. I would however recommend this product, and would probably buy it again because it seems to be the only decent product out there of this kind.

Lights work as expected and the remote is a nice touch.

طلبته يكون cct يعني يمديك تغير درجة اللون الابيض وجاني لون واحد بس درجة 3000 والكنترولر غير عن الي بالصورة حق تعتيم بس الي جاني

Fácil de instalar

تمام.. بس المشكلة في نوع الفيش ماقدرنا نلقى له نفس القابس

muy buen producto, ilumina muy bien, fácil de instalar , las conexiones son muy pequeñas para cortar la línea y volver a soldarla pero si se puede

Se descompuso con a penas unos meses de uso, lo instale en un consultorio y ffunciono bien como 7 meses de ahi empezo a fallar el touch... como no hay muchos dimmers compatibles con la marca, nos amarrann las manos