ARCTIC Freezer 34 Esports Duo - Tower CPU Cooler with BioniX P-Series case Fan in Push-Pull, 120 mm PWM Fan, for Intel and AMD Socket - Grey/White

The media could not be loaded.  Short summary at bottom if you don't wanna read the whole thing.I hate writing this review because I really wanted it to work. This was literally the perfect cooler to go with a white build. I had watched a bunch of video and reviews of it and it seemed perfect for temps and a white aesthetic. Even when I got it, it looked amazing but unfortunately it was defective and the replacement was also defective and also clearly second hand, probably returned by someone else.So the first 5 pics and the video is the first product and basically the mounting clips part of the cooler was pretty visibly uneven. You can see it in pictures 1 and 2. Apart from this, one of the heat pipes was visbly not even. I don't know if you can see it clearly in pictures 3 and 4 but the right most heat pipe is slnted and curves inward at the middle and hence makes terrible contact with the cpu. 5th picture you can see how whole cooler is tilted a little cuz of the mounting clips not being even and in the video you can see how the stanoffs all have different heights coming through the holes of the mounting clips because of how it's tilted. I still went through the pain of trying to install it to see how temps were and it took a lot of effort because of how uneven the mount was and yes it was still tilted even after installing and temps were terrible. It was nearly the same as my stock ryzen cooler 55-50° at idle.I ordered a replacement and honestly I don't really need to talk about it the pictures speak for themselves. I don't even know what to say. The packaging was terrible. A whole heatpipe had loosened ? Disconnected ? I don't even know what to call it. The sticker that was supposed to be on the contact area was off and stuck to the QR code for manual. The cardboard box where the wires were supposed to be neatly kept it was just stuffed in the heat pipes, wires were outside. There was a bit of thermal paste residue on the edges of the bottom of the cooler. You can see all of this in the pictures. I wiped some off to make sure it was thermal paste and indeed it was. You can see even the clips supposed to go in the holes for the fans were not put properly and one of the corners had actually been pulled out so bad you couldn't put it back without bending the clip yourself. The product had clearly been used and probably returned by someone else. Props to amazon for atleast getting replacement within two days and it happening seamlessly. I've just gotten this second product as I'm writing this review and this time I'm getting a refund , hope that goes well too.I don't know if this is Arctics fault because they make some really great stuff and a lot of people who got this product got it in perfect condition, or if it's the sellers fault but yeah, it's really sad I couldn't get a working perfect version of this cooler.SUMMARY - first product had uneven mount and uneven contact area because of slanted/curved heat pipe. Bad temps.Got replacement which was clearly second hand and defective. Extremely uneven heat pipe. One of them would basically make zero contact with cpu. Fans clips were not put properly and one corner was bent badly. Wires were not packed and peeling sticker was removed and was somewhere else. It had clearly been mindlessly repackaged.

Arctic Freezer 34 Esports Duo - Great air cooler in this price range.I was very sceptical at first to go for an air cooler rather than an AIO. But really this is a beast.My room Ambient temperature is 38 avg, without ACCPU temp after this installing the coolerIdle temp - 30-40 C100% load - 70-75 CNoise level is absolutely min...CPU - Ryzen 3600 OC 4.2Cabinet - ant esports ice 511 mt

Temps are average, dye is too small for the processor, doesn't even cover 60 percent of the cpu.

I use an I7 9700kavg temps 55 degreemax with 4.9ghz@ 1.290 v 67degreein AIDA64 ExtremeIntel(R) Extreme Tuning Utility stress tests -Passed successfully with temps below 67 degreesPrime 95 fails

Easy to install. The ideal and load temperatures have gone down 10 degrees atleast.

There's was no sound at all if you are using a asrock motherboard you will have no problem 😊. White looks best.

Overpriced, not overpriced, unacceptable price for this thing. don't buy this rather buy A liquid cooler. it is a waste.

The media could not be loaded.  I wanted to upgrade my CPU cooler since the old one was not aesthetically pleasing and didn't have the best performance. This was my first time installing a PC component and it was not that difficult. I recommend taking the motherboard out of your case and then installing it because I faced some difficulties while installing the cooler in the case. Also If you are using a high-end processor like a Ryzen 7 or i7, use a case with good airflow. I installed it in a NZXT H510 with a core i5 10400f which has bad airflow so wouldn't recommend using a high-end CPU and a Bad airflow case together. Even with the bad airflow, My temps did not go above 55C which is amazing so this is definitely a good cooler. My only complaint is that there was no manual included and I had to watch a video in German to figure out how to install this in a LGA 1200 Socket.

Poor built.Looks great but the screws for the mounting brackets are poorly manufactured. Two screws could not completely set and therefore did not allowed the radiator to contact properly with the CPU. Insisting in applying more torque on the faulty screws resulted in striping the back plate. Have kept the two fans for spare and shoved the radiator and screws in the scrap metal. First time buyer, will be the last.

Silencioso, discreto y de gran calidad. Es un veintilador de torre excepcional que mantiene mi cpu i5 10400 frio casi a temperatura del ambiente. Mis temperaturas no rebasan los 60 cuando estoy en el 100% de tareas. Eso si, deben recordar remover el sticker del heatsink, a mi se me olvido por alguna razon y tuve que volver a quitar y poner.

I am Using it for my ryzen 3700x with noctua thermalPaste, temps are 4-5c better than stock at full load and 10c better at idle..I got it with heat pipes bent when i opened it, but since i had some urgent files to send to the client, i installed it anyway, it works good so i kept it…

I have Asrock Z97 Pro4 mobo with an Intel i7 4790K. Temperature of CPU had been an issue with 4790K OC. But this cooler made a huge difference! It dropped down the core(s) temperature from 90~100 degree C to 65~70 degree C immediately! What a performance with arctic white appearnce and quietness! I love this cooler as soon as I installed it. I would like to see it performs with the new Ryzen CPUs in future.

Obviamente hay mejores en el mercado pero estoy increíblemente satisfecho. Lo utilizo con mi i-7 de décima 10700f y nunca ha superado los 75° C hasta con renderizado o con juegos a más de 200fps. Hay mejores disipadores por rendimiento pero la relación precio-calidad ha sido sorprendente.