RMR-86 Instant Mold and Mildew Stain Remover Spray - Scrub Free Formula, Bathroom Floor and Shower Cleaner, 32 Fl Oz

This smells just as it should because it DOES THE JOB. Killed stubborn mould without touching or scrubbing. Very strong But it did smell which is understandable. Did it in the morning and left windows open all day. Expensive but it did the job so was definitely good value instead of wasting money again on a cheaper product that’s less effective

Very good

Excellent product, highly recommended.

I thought this was going to be a miracle worker. It wasn’t. Good nut price didn’t warrant performance

Works wonders in munites!

It is good don the job

Unfortunately for me, This had absolutely no affect on Mildew stains on a stripped front door whatsoever, I was hoping to see the instant stain removal as I've seen on video but that was not the case in my instance, It smells to me like watered down household bleach which is surprising considering the eye wateringly high price. On another similar door I found a simple white vinegar spray, then a paste of Bar Keepers friend and light sanding to be far more affective in removing the stain completely. Normally, I would not return something like this but given the huge premium cost I have no option but to do so.

Despite being pictured with a spray head, the order contained only the bottle. I had to find a spray head and the first one leaked. This was bad news because you don't want to get this stuff on you or your clothing. Once fitted with a reliable spray head it was highly effective. Mould vanishes in minutes and so far has nor returned (2 months). It smells so strong your eyes will water. After an hour or two of room ventilation it is more tolerable. It's gone by 24 hours. But the anti mould effect remains. Work clothes, cloves and eye protection recommended. Some may find a respirator (or a face mask) is needed, particularly in enclosed spaces with poor ventilation. It's worth the effort.

It promises to remove mildew stains from concrete and stucco. We followed the directions exactly and it made absolutely no difference. I wasted $90. I got better results with vinegar. Very dissatisfied.

My bathroom had these old mold stains that started peeking from underneath a coat of paint that the previous owner had put, which started to come out with vengeance. Multiple members in my family take really really hot showers and leave tremendous amount of steam on the walls and the surfaces. RMR-86 cleaned them all. Including the mold that was inside the calking, leaving the whole place shining and very clean. Only one bad thing about the product is the STRONG chlorine smell that lingers around for days. Advice to close the bath room doors properly and open any windows, spray vinegar mixture after application and wear mask while applying the product. Inspite of the strong smell, I've given 5 stars because of the cleaning performance and how quick it was!

Ok, seriously, if you’re brave AND a home owner, BUY THIS. This is the literally the BEST product for mold or mildew i have ever used. YES, it may need to be evaluated by the Chernobyl Nuclear Assessment Team down the road, but PLEASE let me explain and leave some application pointers #1) If you're not using PPE + a respirator, make SURE you only plan to work on small patches at a time, and in a well ventilated area you can get in and out of to fresh air quickly. I cannot stress this enough. This stuff is STRONG. As in...BLEACH x about 5. You can Taste It. Do NOT BREATH IT! If you can, hold your breath, hold the bottle at a safe distance, spray the area quickly, then runaway! “Spray. Then Runaway.” #spraythenrunaway #2) Get a CLEAN towel and place it under the door crack of the room you run out of after spraying. use it, ALWAYS! Clean towel is your buddy here. #3) After 15 minutes, Hold your breath and check out your progress carefully. It dries VERY quickly and the smell/fumes drop to a good 1/2 of what they are during initial application. Again, wait AT LEAST 15 minutes before checking. More mold? Spray a bit more in the areas that need it, ...runaway #spraythenrunaway, ....wait 15 more mins and check again....same process as above. #4 Repeat protocol until about 15-25% of mold or mildew remains. #5 WAIT 2-5 HOURS then check again. At this point, the mold should be almost 100% gone. #6 IF more application needed, repeat process again as many times as needed, ....then proceed to fortune and glory. My Actual Spray Process I used on our Bathroom Window Casing: 1. Remove Blinds. 2. Cut large piece of cardboard out to use as a mask for window vinyl, steel or fibrex behind the wood casing. 3. Grab paper towels, about 10 squares and fold them into little wads that can be stuffed at the bottom of the window sill's left and right sides to catch the runoff from the vertical side casings. 4. Grab a small ziplock bag to store the used paper towels in and keep them sealed up and the fumes contained. You can just leave that in the sink. 5. Get a fan and set to low about 3 feet from the open window and blowing toward it. 6. Grab your cardboard and your RMR 86, take a deep breath, hold it....hit the left side wood casing, using the cardboard as a mask for the window behind the casing, hit the right side, same process. Do NOT try and do the top casing, or spray will potentially come back down on you and get on your skin. Don't overspray. Just hit them quickly enough to cover each side. About 15-20 seconds total should be fine. Stuff paper towel squares in the lower right and left window frame, runaway! (for me, I closed the door behind me and stuffed a paper towel under it. Worked like a charm as the smell never got into the rest of the house. 15 minutes later, I cautiously walked back in each time, smelling carefully from a distance and as I approached, as I said, the fumes and volatility drops a LOT after the first 15 minutes but is still STRONG! I removed the paper towels used to capture the runoff in the lower left and right sills, sealed them in the baggie, dropped it back in the sink. Then went outside the room to fresh air, took another deep breath and repeated step 6. Our casing was BAD, so I had to hit it about 4x over an hour. For me, and because I was doing such a small area with plenty of ventilation, I did not go full PPE or respirator. I used long dish gloves, goggles and held my breath each application, keeping the airflow via a fan pushing air OUT the wide open window and as to move any overspray or fumes outside asap. The first application, not a lot of difference. Second, BIG difference. By application 4, 85% of the mold and mildew were gone and we were looking at CLEAN wood. Next morning, I checked and the mold was 100% GONE...so this stuff KEEPS working long after that 15 minute mark. I'd say it likely keeps working up to 24 hours after application so expect to see additional progress on the affected area up to a day later. For the TOP casing, I waited until the sides were treated as explained above. Then 2 days later, I used the same ventilation setup as before. This time, I grabbed a paint brush, poured a tiny bit of rmr 86 into a plastic cup, and lightly painted it onto the top casing, still wearing gloves and goggles. It took more applications...i believe 5 or 6, but was a lot less stressful as I was using so little of the stuff and the fumes, although still bad, were no where near what spraying did. Each application, I'd let sit 15-20 mins, and I kept the paint brush and tiny bit of RMR solution in a cup in the sink so I could just grab and go each new session or dump out with running water. This worked well on the top casing as it was no where NEAR as caked as the left and right sides were, but something tells me, spraying/aerating this stuff out of the bottle must increase effectiveness, as it IS a corrosive and reacts with O2. I'd say if you're doing ANY job larger than what I described here, go Full PPE with Respirator and make SURE the room you are working out of is well ventilated and siphoned OFF from the rest of the house. If you're just squirting a few corners of your bathroom...1-2 squirts, 1 area at a time, then gloves, eye protection and lotsa of ventilation should be fine. Higher up areas, I'd recommend the paintbrush trick. And I'd personally NEVER try and spray multiple areas in the same room...I'd do 1 at a time and leave. Even a few squirts in a few areas adds up fast, and you don't want to create a potential "fume trap" by which you get a breath of lingering spray and burn your lungs/throat, etc. Not worth it!

I don’t usually write Amazon reviews, but this mold and mildew stain remover really impressed me. I’ve tried several other products that claimed to remove mold and mildew stains, and none of them worked as well as this one. This product removed stains that other cleaners couldn’t and showed results quickly after application. It does exactly what it says it will do, which isn’t always the case with cleaning products. For the price, this is a great value. If you’ve struggled to fully remove mold or mildew stains with other products, this one is worth trying.

The product itself is a very strong and effective formula for removing bathroom mildew stains. It works literally in seconds, in less than a minute the surface turns from black to white before your eyes. The issue is the product packaging, namely the spray bottle itself stops working (while at the correct nozzle “spray” position) to where it stops spraying out the product, and the liquid just runs down onto your fingers at the sides of the bottle, and onto the yellow nozzle spraying device. This renders the whole use of the product ineffective. I thought I had just gotten a random defective bottle, but I’ve purchased this more than once now with the same results. Change the dispensing bottles and notify customers when you’ve done so to alert us who’ve experienced this issue that it’s worth it to buy the product again, without having to pour out the product into another “working” spray bottle.