MikroTik RBmAPL-2nD 2GHz mAP lite access point 802.11bgn 2x2 PoE in

Tiny, honestly Tiny, amazing little device, remember if you are using this to extend your wireless network set it up as a bridge not an access point or a router, I use mine hard wired in to a poe net switch, the device does come with a PSU though if you need it. I'm getting 60mbs which is more than fast enough for my phone when sat out in the garden. Connect the device directly in to your ethernet port on your computer for setup and follow the instructions, any questions simply ask an ai chat bot, quicker than anything these days although I would avoid asking the chatbot on here as it's limited. Overall I can highly recommend this, if you wanted an outside access point this would easily fit inside a small plastic terminal box. It's highly configurable via the in built web server or the software, I used the web interface and it was quick and simple. Note that out of the box mine was set with no WiFi password! Make sure you change this, look for the little padlock next to the WiFi symbol on your phone, if you don't see it, connect to your pc and set a password for access.

Performance et compact peut être un peu complexe pour les novices ,route OS marque que je conseille AU TOP TOP

werkt goed. verwacht geen wonderen. maar voor kleine ruimtes prima te gebruiken en makkelijk mee te nemen.

Producto estupendo para llevarlo en el bolsillo, la maleta o en un viaje y utilizarlo cuando lo necesites como un AP personal, además es un Mikrotik en toda regla!. Y uno se pregunta, y además ¿para que me sirve un punto de acceso de tan sólo 100 Mbit/s y Wifi 2G? en mi caso es para aislar los inseguros IOTs que sólo se conectan las no tan seguras redes 2G, por no andar creando vlans, tengo a todos estos aparatitos conectados y aislados (+ isolation) en el mAP, el consumo es ínfimo, es POE y el que sólo sea 100 Mbit/s es lo máximo que saca el que en el hipotético caso se cuele... Al ser un routerOs tiene firewall y otras cosas mas... También se me ocurre para una red de invitados aislada de mi red En resumen, sin complicarte, aísla lo inseguro en el mAP!

The MikroTik mAP Lite is the adorable cousin of the mAP 2n—the one that shows up with half the features, a third of the weight, and still somehow manages to be useful in situations you didn’t see coming. With only a single Ethernet port, you lose a big chunk of the Swiss Army knife tricks the larger mAP can pull off, but what remains is still a shockingly capable lab and field companion. In the right hands, it’s the fastest way to pop up a Wi-Fi network when you’re tired of standing in front of a rack, need to reach gear from across the room, or want to stop leaning over a switch like you’re trying to smell the firmware. In the lab, the mAP Lite earns its keep over and over. Need a quick test SSID to validate DHCP, DNS, or captive portal behavior? Done. Need to figure out what a device is doing before you commit it to the production stack? This thing will happily give you a clean, isolated wireless bubble to experiment in. And the “one Ethernet port” limitation actually simplifies certain workflows—you plug it into something, it becomes the gateway drug for diagnostics. No bridging tricks, no inline MITM setups, just a tiny radio that gives your laptop or tablet the wireless rope it needs to poke at devices hiding behind racks, under desks, or in the dreaded top-of-ladder zone. In everyday tech work, the mAP Lite is basically a get-out-of-jail card for laptops without Ethernet. That single port becomes your emergency NIC, your temporary portal into stranded VLANs, your way to SSH into switches that live in awkward corners of MDFs. It’s not winning any throughput awards and it’s very much a “2.4 GHz only” child, but for powered-from-anything PoE-in convenience and dead-simple portability, it’s a tool that quietly becomes part of your standard kit. It doesn’t replace the full mAP, but it fills a niche you don’t appreciate until you’re on-site, stuck on Wi-Fi-only hardware, and wishing you had just one more wired hop. This is that hop. ⸻ Pros • Tiny, featherweight, and ridiculously easy to toss in any toolkit • Great for lab testing, quick SSIDs, and isolated “what is this device doing?” scenarios • Perfect workaround for laptops with no Ethernet port • PoE-in makes it deployable anywhere a switch or injector exists • Incredibly cheap for the utility it provides Cons • Only one Ethernet port—no bridging, no inline MITM, limited tricks • 2.4 GHz only, with all the crowding and interference that implies • RouterOS depth is still there if you stray beyond simple configs • Throughput capped by both hardware and physics • More limited Swiss Army knife than the full mAP