LittleDot Little Dot MK2 MKII 6J1 X2 6N6 X2 Headphone Amp Amplifier Pre-Amp Tube

Muy bueno con muchísimo poder, sin embargo tiene un poquitito de ruido con auriculares muy sensibles, si los tuyos son poco sensibles no lo sabrás, pero no hay auricular que no pueda levantar sobresalientemente. Como consejo solo cambia los tubos originales cuanto antes y tendrás un sonido con muchísimo cuerpo, excito para escucha de disfrute.

220ボルトのシールが貼ってあるけど、実際に手元へ届いたのは110ボルトのシールが貼ってある商品でした。 これはいけません。ちゃんと日本仕様の商品を送るって商品説明に書くか、正確な写真を載せて欲しかった。 付属品のイヤホンジャック変換コネクタは袋の中でバラバラになっていました。 まさかのセルフ組み立て方式かも知れないと思い説明書を見てみましたが、英文と中文が書いてあるだけで当然組み立て図は載っていませんでした。ハズレだったようです。 付属の電源コードには商品写真の通りアースが付いているので変換プラグがなきゃダメです。 電源ランプは青色ＬＥＤで、本体を見れば電源を切り忘れることは無いほど強烈に輝いています。 真空管の光に比べたら眩し過ぎなので隠してしまいたくなります。 正面パネルの Little Dot MKII の文字は貧相に見えちゃう人が居るかも知れないです。 パワーアンプのボリューム位置との組み合わせによるとは思うのですが、ボリュームの反応が敏感です。 ボリュームツマミには滑り止めの細かい溝が入っています。 ボリューム位置の表示やフチの銀色部分は金属の下地色です。芸が細かい！って思います。 部品の取付や動かした感触はしっかりしていて、ガタついたりフワフワして頼りなく感じることはありません 付属の真空管は中国製だと思います。ロゴが漢字です。 飽きてしまった時は真空管を別のメーカ製の物に交換したりして遊び倒せそうです。 音質は個人差や環境差があると思いますが、個人的には良いと感じています。耳障りな音でないことは確かです。 レビューの最初でどうかと思った事を書いてはいますが、異臭がする、火花が散る、本体が異常に熱くなる、雑音が混じる、雑音しか聞こえない、音が出ない等の致命的な欠陥はありません。私はこのアンプを購入して損をしたとは感じません。 再度購入して友人や兄弟にプレゼントしても恥ずかしくないと思える程に気に入っています。

A review for the rest of us: If you are a hardcore tube amp user then I would suggest you skip this because this is not for you, this is for those people that are like me, a noob with tubes that has no clue. First let me say that this was not my first tube amp, the first time I purchased a tube amp I figured I would go big, buy the best rated, expensive, and best reviewed with the most tubes because all of that would mean I am getting the best tube amp I could get... correct? Maybe.... but I wouldn't know because I had no clue what I was doing, listening to or listening for. Tube amps are not as simple as plugging in your headphones and BAM! all new sounds and stark differences. I quickly found out that no matter what I did or what tubes I put on it, I wasn't getting that, so of course I had a faulty tube amp and immediately sent it back swearing that everything I read about tubes was a bunch of crap and a waste of time and money. After spending some time with high end headphones and a decent dac/amp, I began to hear the changes in music quality and when going back to my $30 and $80 headphones I could immediately tell the difference and understand what I was and was not hearing. It was at this point that I thought back to the tube experiment and decided to try it again, but instead of going all out and spending top of the line money for top of the line equipment I decided to look around for what was believed to be a good starter tube amp, enter the LD MKii. (all explanations from here forward are my noob terms and do not require expert dissection and argument) LD MKii - black box with box and four tubes on top. Blue power led, audio jack and volume on the face. [what the smaller black box encases is beyond me, nor do I care at this point. All I know is it works for me] Tubes - Large tubes are power tubes, Small tubes are pre-amp tubes. [This is where the magic happens, there is more to it but it was in *"tube rolling" that I found my sound] Headphones - Here is another thing that I did not understand where tube amps are concerned, for best results, dynamic driver headphones are the way to go. So now that I was armed with my HD800s, HD6xx, 1More triple driver and the LD MKii I started plugging things in and checking the sound. First thing I did was try it with my Sanskrit pro and then with my Aune X1S while cycling through my headphones on each. There was a slight difference between the two but to my ears (which are admittedly compromised) it wasn't enough for me to say you should use one over the other. Next I took a few days to listen to different types of music and compared it between the tube amp and Aune X7S because the X7S has an balanced xlr connection that I love on my planars. As I did this I began to hear the subtle differences and where the tube shined and where it did not. To me, the tube and my HD6xx were the best match based on what I like. Lastly, I began the task of *tube rolling. I did some research and found some of the more popular tubes that are paired with this amp. I eventually settled on the 7-Pin GE JAN 5654W for my pre and the Novosibirsk 6N6p / 6H6pi for my power. This pairing gave me the most amazing improvement on sound, again, based on what I like. I love all genres of music and have found that when listening to jazz, blues, quartets, trios, Cello, and classic rock (AC/CD, Metallica, Eagles and many others) that the combo flourished. The beauty of the sound in its fullness, warmth, separation and clarity was absolutely stunning. I will listen to other genres such as EDM and others that actually sounds better on my LCD 2 Closed to my ears. I have watched movies and it performs great in that space as well but again, it depends on the the type of movie it is, would I use it for Jurassic park or an MCU movie, sure, but again, I would prefer the LCD 2 Closed for that. The point to all this is that while you can buy a dac/amp combo or individual unit pairings and get perfect sound and balance, the tube will take the edge off of the perfection and dirty it up but in a most wonderful way. Tube amps are more about the perfection of imperfection like smudges on charcoal art and mayonnaise in a cake recipe. You wouldn't expect it to work but then you try it and you get that WTF moment when you realize how good it is. To me, the beauty of this amp is its simplicity and ease of use. Are there better amps out there, sure, but from personal experience, the LD MKii is the most inexpensive, easy to use introductory tube amp that will give great results. Annotation *Tube rolling does not mean place it on your desk and roll the round tubes across it over and over (you laugh but that is exactly what I thought it was until I looked it up). As best I understand it, rolling is when you install different types of tubes (they come with different materials and resistances) to get a different sound profile. You can mix and match different power and pre tubes to one another, but, never mix and match them to itself. From what I understand, you want your pre tubes to be the same to itself and power tubes to be the same to itself. Mixing them across brand and type to itself could have catastrophic consequences for your tubes and even the amp. Next thing of note is that you will want your tubes to be tested and matched, I can not explain the how, what and why but from everything I read, that is the best practice. Tested and matched means that the type of tube (pre or power) will be a tested and matched pair to itself not across types. Last thing I will say is that there is a jumper inside the unit that will effect the power output. I have not tried it and would suggest that if you feel you need to do this, go check out some of the reviewers that do a deep dive into the LD MKii, there is a lot of good information about this unit out there so don't be afraid to look it up or even ask questions because it is better to ask when you don't know than to assume and possibly cause irreparable damage. I hope this helped and congratulations for making it to the end of my never ending post. Ethan

this kept tripping the power in my house. Couldnt recommend it!

I use this as my daily driver paired with my D10s to power my HD6XX. This machine is incredible for them. The HD 600s series are very transparent and allow your amp really shine through. They are basically made for Tube amps. I actually tube rolled this amp and I noticed the difference istantly with my headset. This device has to be used paired with your favorite sennys but you will love it. You must not be afraid to open it up and/or tube roll. Tube rolling is integral to the fun of a tube amp. By opening the amp you adjust it to work with varied tube types. You can also adjust the power to fit different headphones. Do not use this with anything under 120ohms. It works better with headphones over 200 ohms. Planars are not great for this.