Fluke TLK-220 SureGrip Industrial Test Lead Kit with Zippered Vinyl Carry Case

I'm an AutoTech installer for Geek Squad, so I use my DMM almost every day when I'm at work. This kit has been a boon for me. The piercing probes are easily the best thing about this kit. They let you test wires without having to hunt them down at the source and try to t-pin into them. And depending on the application they can be used to help with testing mocked up circuits. That being said, be aware they can only handle 60VDC at 5A. If you go any higher than that the needle in the probe will heat up and will melt the core, ruining the probe...ask me how I know. (I loved these probes so much I bought a second kit just to replace the probe I ruined). The wire leads are long, like really long. At around 5.3ft. They're a little too long for my liking so I use them as backup lead wires. But the rest of the accessories work with the shorter interchangeable lead wires I have been using on my DMM for a while. The alligator clips work VERY well, the teeth are very sharp and you can rest assured that when you clamp them properly to a surface, they're not going anywhere. I mostly use my meter to find horn wires, test polarities on ignition circuits and what not, and the two default tips I have on my meter are one of the piercing probes and one of the big alligator clips. And best of all it comes with it's own pouch with clear pockets. So you can easily take it on the go, or leave it unrolled in your tool box and see what's in each pocket without having to dig through it. If you work with electronics on a regular basis in the automotive industry, this kit WILL NOT let you down. It's 100% worth the extra money than some of the similar kits on Amazon. I've been very happy with this kit, I use it at some point every day I work. Just another reason to trust and love the Fluke brand. But again, just make sure you don't pump anything more than 5A through the probes or you will regret it!

Quality Fluke teat leads; gives you lots of options for different test scenarios. If you have really tiny pins then you might need to use the 'ol safety wire trick but, defiantly worth every penny.

After two years, I've found few circuits that couldn't be easily, quickly and securely accessed with just the components in this set. The exception was larger contacts in old equipment, which were easily addressed by adding these: Fluke AC285 SureGrip Alligator Clips . Everything in this kit is useful and very well designed; there's no filler or junk, and it alone is sufficient for almost everything I use a meter for. The silicone leads seemed unnecessary for my non-extreme environment, but their flexibility makes an amazing difference in their ability to access and stay attached to difficult connection points. And, unlike PVC leads, they are not likely to stiffen with age. CONTENTS * Two 4-ft test leads, shrouded right-angle male banana connector to stainless steel test probe; rated 1000v 10A * Two 1-meter modular test leads, shrouded right-angle male banana connector to straight shrouded male banana connector, 10A * Two female-female banana test lead coupler (enables you to use the 1-meter modular leads to extend the 4-ft leads) * Two of each of the following slide-on adapters that fit the test probe on the 4-ft leads _insulated alligator clip, 5A _IC probe (thin), 3A _insulation-piercing probe _shroud; leaves only the tip of the probe exposed * Two of each of the following attachments that fit the straight male banana plug on the 1m modular leads: _test probe _insulated alligator clip, 5A _bare spade lug _claw clip with 26mm lead, 5A _hook clip with 26mm lead, 5A * A high-quality nylon roll-up case with four translucent vinyl pockets to organize, carry, and protect the set. The top pocket, which holds the relatively-small test probe adapters for the 4-ft leads, has a Velcro closure, as does the case flap. It is compact and sized for this set, with no room for additions.

Why did you pick this product vs others?: Received an opened Kit tlk282 with missing soft carrying case from Amazon. At first I beleived the kit no longer came with the soft carrying case. Returned it for a replacement, the replacement included the soft carrying case. Love this deluxe kit, impossible perform proper electrical diagnostics with out

The pouch is not the best for holding the leads. The quality looks fine. But some details at the plastic holders. Since is a Fluke brand I am. Assuming is good quality.. we had used it a couple of times and everything was fine for. Now

All parts were included. The roll up bag can be a little sloppy when opening, leads can come falling out.

Ce kit rassemble tout ce dont un électronicien a besoin. Plusieurs pinces de connexions,cables et rallonges. Tout ça de superbe qualité. Merci Fluke!

Very comprehensive set. A bit pricey but quality isn’t cheap

This makes the use of my multimeter so much easier and better

Le kit est complet. Personnellement, j'y ai rajouté 2 pique fils

Heel blij mee. En origineel