RAW 18319 Six Shooter Filler for King Size Cones, Plastic

Cool tool

Okay so I received my six shooter in the mail and wondered if I could use the standard 1 1/4 cones. The answer is YES BUT.... The problem comes from the cone being shorter so the cap doesn't lift the cone high enough to clear the chamber. And if you dump it out you are back to square one or maybe two if you don't lose it all out of the cone. So to solve this I would place my finger over the hole and gently dump out all the extra. This would prevent the filled cone from dumping back out. I would then turn the Six Shooter sideways parallel to the floor and use the cones cardboard stuffer to poke the cone out far enough to grab while making sure it doesn't dump all over the place. It works! I have some Kings to use with it too so I'll update if it gives any trouble but it sounds like its designed for Kings and the cap is suppose to push them out of the chamber. Nifty littler loader thanks Raw! Been some time with it so figured I'd update my review. Still love it. One thing I've noticed is that the bottom of the cones near the tip don't pack as tight as they need to. Playing around with it a bit and it works better if you stuff the first 1/4" or so than bang the rest in per instructions. This way you have a solid pack at the base of the cone. Still a great way to fill multiple cones quickly and easily.

Works great. Cuts the time from like 10-15 minutes to pack a jay to about 2-5 minutes max. Works as it should. Great price too. Definitely don’t hesitate to get this thing because it will make your life easier and saves you time and every pre roll comes out PERFECTLY. smooth hit and just a better smoke than doing it the old fashioned way!

I'm thankful for this cone filler because I can't roll joints anymore. I can only use my right hand, and this is another tool to help me keep my independence. It only took a couple times for me to start to perfect the packing process.

I almost returned this because I really thought that it didn't work. I kept it and boy am I glad that I did. I'm not good at rolling, so the cones are my go to when I need to roll. This thing makes it so easy to roll multiples and I love it. The first few times I used it I was just kind of doing whatever so that's why it wasn't working correct. I took my time read the instructions a few times until I felt comfortable that I understood what to do. Loaded it up and got 6 perfect rolls. I put enough in to fill close to the filter and then used the pin to push each one tight so that it was firm near the filter. Then I filled about half way and tapped it on a hard surface like the instructions said to do. Then I filled them up and took the top off and pushed them up from the bottom. Easy peasy and oh so breezy.

This is a great product if... 1. Use the preroll size that matches the six shooter size. I bought a king shooter and king prerolls. The preroll(s) drop into the holes. I did six at a time. 2. Grind your flower. 3. Sprinke ground flower into the holes with the prerolls. Use a tamper to lightly pack the flower into the prerolls. Doing this prevents a limp joint! I don't measure but around a half inch. 4. Now add flower to the top of the cylinder, put on the lid, and gently rap the cylinder on the table. You're not trying to destroy it. Easy going tough guy. 5. Tamp down the flower into the prerolls and repeat steps 4 and 5 until the preroll is as full as you like. 6. Push the preroll up from the bottom and twist the end. This is fast and easy. Do not rush it. Enjoy and do a good job. The joints burn more evenly than I'm used to. Loading evenly from the top works great. Edit** ...adding this after using a second time. Filled three this time. I noticed that the prerolls extend below the bottom of the unit. Putting the lid temporarily on the bottom is an option if you're concerned about pushing the preroll too hard when filling. Worked great again. Not much tamping required for a tight joint. %%% Update after several months. Well, this thing has potential. Maybe you can figure it out. I need to have first inch or two next to the filter filled with enough pot so the joint isn't floppy.

I wasn't sure if I was going to like this thing but I've come to enjoy having it a lot. Being that personally I go thru multiple cones a day this tool helps me be able to do 6 at once fairly quickly and easily while watching something on YouTube, but also is great for party setting when you may want to have more than one going at once. You also have the option to just do 1, 2, or 3 for those who can't pack cones well themselves

Perfect

Heel handig dat ik dit niet jaren eerder heb aangeschaft

Good product !

Works great for me. My flower is pretty sticky and it still works good. I will put a bit in each cone and then pack to make sure its sturdy at the filter. Then just use the banging on a bench method in the instructions. I will fill them until the flower is at the top of the cone using the bang method. Then use the packing stick to pack the joints which leaves just enough to twist the top closed. Great way to bang out 6 cones relatively quickly.

No lo usamos mucho porque es algo complicado de encajar y que se rellene bien. Pero no está mal para uso esporádico

Bought as a gift for my Mum who smokes for pain, she pre-rolls a bunch at a time for over a few days & says it's really easy, saves time