TRUE MODS Front LED Turn Signal & Side Marker Light Replacement for Jeep Wrangler [Smoked Lens] [Amber] LED Light Kit Compatible with 2007-2018 Jeep Wrangler JK (07-18) & Unlimited JKU Accessories

Installed perfectly on my 2015 JKU Sahara. One reviewer noted that the front facing turn signals do not fit correctly because they stick out a little. Looking at the stock/OEM lights before replacing them shows thats how they are designed, so these are an exact fit. It's worth noting that you do not need to remove your grill or even pop the hood to get these installed. To replace the front facing turn signals, simply reach through the side of the car next to the wheel, slide the red clip lock and unplug the cable from the lights. From there its super easy to pop the 2 tabs that keep each light in place and push the lights out the front of the grill. Then slide the new lights in (you'll hear them click, then reconnect the cable and slide the red clip lock. Took all of 5 min. The side markers are much harder to get installed compared to the turn signals, but over all not too bad. Plenty of youtube videos showing you how to do them. Plan on buying some additional plastic pull rivets incase the existing ones break. Over all they look really good however time will tell if hyper flashing or waterproofness becomes an issue. I'll update if anything goes wrong. Hoping these are a better alternative to the Xprite & Sunpie offerings.

Plug and play!! Very happy with them and above all awesome product!

So far so good. Better than stock and look great. The passenger marker light does not sit flush and sags slightly on my 2017 JK

Looks great

Fit perfect

Purchased this kit of side markers + turn signals for my 2012 Wrangler Unlimited. I unfortunately pile up projects so I just now got around to trying to finish the install, out of the return window. By my review, you can tell I wished I could return them. For the side markers, it's a little difficult to get up in there for the install. I got the left side installed successfully though, and it works fine. For the right side, one of the wires ripped lose on both sides while trying to angle it in. I tried to re-solder it, but its too tight to get to the wire inside the fixture, and the lens is not removable to get to it more easily. However, I was willing to chalk it up to me being too rough on the install. I was willing to purchase a new set of side markers from them if everything else worked correctly (it didn't). (As a side note, as of right now they sell a replacement kit- left/right- of just the side markers instead of this kit with the turn signals. They also sell a separate replacement left side marker on amazon... but not the right one, which is the one that broke for me. Odd.) Finally I went to the turn signal install. Both installed easily. However, they do not clip in tightly enough, which resulted in both having a loose connection. They work and look good when the connection is made... but just a tap will make either stop working. When I put the factory ones back in, the connection is tight and they work perfect. Sadly these are just poorly made or have poor quality control. I would not recommend purchasing these. If you want to take the gamble, make sure you install them within the return window so you can return them if they are defective like mine.

Nice product, sturdy build, great price. Will order more products from this manufacturer Dr.

These are way better than stock in both looks & performance. The turn sig lights took 5 mins to swap counting the time to remove the grill. The side marker lights took 15/20 mins a side to do. I watched a few vids as I never changed those before. Definitely recommend

light Brightness is Better than stock one also it looks gorgeous and futuristic. Make sure you buy the new generation that comes without resistor to make the installation easier for you and you just unplug the stock and replace them version with resistor will make the installation harder and you need to play with the wires which I dont recommend the difference between new and old versions: the new one will not hyperblink the old will hyperblink unless you install the resistor. Note that if you install them the old blink when opening your car will go but you can program it using the key

the right side signal light is not working :( is there a resolution ?

Inadaptés en lieu et place. Très très loin d’un plug and play ! Prévoir de revoir tous le câblage des clignotants ainsi que les connections du véhicule.

Las luces laterales están grandes para el JK se tiene que ranurar, los frontales bien.

I don't usually write reviews but these lights are perfection for the front end of my baby. The turn signals were easy but I recommend you read and follow others steps here along with time and patience for the marker lights. Those fenders do not make the job easy. The seller was amazing with help returning the second box I accidently purchased so thank you to them and I can't wait to move on to the next project on the jeep!