Replacement Accessories Compatible with Narwal Flow Robot Vacuum Cleaner (2 Main Brush, 4 Roller Mop Pads, 6 Dust Bags, 6 Hepa Filter, 8 Side Brushes, 2 Filter Cotton Pads, 1 Dustbin Liner)

2 main brushes: Visually they look identical to an original Flow main brush. The original weighs 2.4oz while the PhoebCynthi weighs 2.2oz. 4 roller mop pads: The material on an original appears plusher when moving a finger over it. OEM weighs 2.4oz and PhoebCynthi weighs 2.0oz. 6 dust bags: The dust bag felt a little bit thinner than an original, so I weighed each. Both weigh 1.4oz. 6 HEPA filters: When compared to an original, the filter material color is more towards white while an original is more towards grey. A little more glue is seen on the inside edges of the side that fits into the Freo while there is less glue on the Freo original filter. (Photo 1) 8 side brushes: A couple of the brushes were a bit frayed. (Photo 2) 1 plastic dustbin collector 2 water filter cylinders Roller mop pad test results: 6 vacuum and then mop runs over 15 days. Each run included 2 mop cycles. The mop pad looks in good condition. I did notice an area (Photo 3) that looked worn. Using my fingernail I rubbed that area and it turned out to be just compressed, possibly by location of the pad during one of the runs during the mop drying process. HEPA filter test results: 10 vacuum and then mop runs over 21 days. When installing, it was a very tight fit, but did install. The filter is hard to remove but does come out. An original filter installs easily and is easily removed. When it’s time to change the filter, which I do every 2 weeks, I rinse the filter in hot water and swap in another filter that was cleaned the 2 weeks earlier. The filter held up to this cleaning process. Main brush test results: 7 vacuum and then mop runs over 15 days Looking at the fibers of the main brush, there is no wear seen and the flexible rubber on the brush is in good condition. Side brushes test results: 6 vacuum and then mop runs over 15 days. The brush bristles are in good condition and look like new except the lower area of the brushes, which are dirty. This is normal as the brushes come in contact with the dirty floor. (Photo 4) Long term usage is unknown, but for the price, these replaceable accessories are a good deal.

I picked up this replacement accessory kit for my Narwal Flow robot vacuum and it’s been a great value. It comes with a lot of parts—main brushes, mop pads, dust bags, filters, and side brushes—so it should last quite a while before needing to reorder. Everything fit my vacuum without any issues and was easy to swap out. The quality seems good and my vacuum is running like new again. Much cheaper than buying the official replacement parts, so it’s a nice way to save some money while keeping the vacuum working well. Definitely a convenient all-in-one kit. 👍

Useful kit, good quality, properly sized: This is a pretty useful kit to keep around, even if you don't need all the replacement parts at the time of ordering. I've dipped into the kit over time to replace parts as they've worn down or gotten dirty, and having this around is very useful and doesn't take up much space. The product's quality is pretty good, feeling on par with the original pieces. The product is well sized too and all pieces have fit in properly as replacement parts and function as intended. The dust bags and hepa filters in particular work very well to keep the exhaust clean and the brushes work well to remove dirt and dust. Overall, this is a good product and I would recommend.

This replacement accessory kit has been a very convenient and practical way to refresh my Narwal Flow robot vacuum. Every single piece in the set fit perfectly, just like the original parts, with no compatibility issues at all. Installation was quick and straightforward, and once everything was swapped out, suction and overall cleaning performance felt fully restored. It’s nice to have all the essential maintenance items in one package instead of buying parts individually. In daily use, the main brushes handle hair well without tangling, the side brushes reach edges and corners effectively, and the mop pads clean evenly on hard floors. The HEPA filters and dust bags fit securely and seal properly, helping reduce dust escape and keeping the vacuum running efficiently. While the materials may feel slightly different from OEM parts, the performance remains consistent, and the value for money is excellent. Overall, this kit does exactly what it should—maintains cleaning performance, simplifies upkeep, and saves money compared to original replacements. A solid choice for anyone looking to keep their Narwal Flow performing at its best.

This kit of replacement accessories are compatible with the Narwal Flow robot vacuum cleaner. This set includes: 1 dustbin liner, 4 roller mop pads, 8 side sweeper. brushes, 6 bags, 2 collection brushes, 6 HEPA filters, 2 filter cotton pads, The edging brushes do OK on this unit. They're not the best out there. But these are basically identical to the originals. It really has more to do with the way the machine gets up into the corners. The main brush is made of quality rubber material. And doesn't tangle with hair, I think that because of the way it tapers to and end. It has some way of pulling the hair off, it's pretty cool. The HEPA filters are supposed to capture up to 99.99% of dust and dirt, as well as other fine particles. All in all, these replacement parts work just as well as well as the originals. And are all fully compatible. This bundle is significantly cheaper than the original parts from Narwal's website. And has enough that you will not need to buy a new bundle for a very long time.