Upper Control Arms 2-4" Lift for 2007-2018 Silverado 1500/Sierra 1500, dynofit Suspension Control Arm Kit for 07-18 Tahoe, Yukon, Yukon XL, Suburban 1500 & Escalade, Set of 2 Pcs

I installed the DYNOFIT upper control arms on my 2015 Silverado 1500, and the difference was immediate. These control arms are solidly built and clearly made to last—especially the heavy-duty, heat-treated ball joints. They offer better range of motion and really helped me dial in the alignment perfectly. The polyurethane bushings are a major upgrade over factory rubber ones. They handle temperature changes better, reduce noise, and can be replaced easily—something you can’t do with standard rubber bushings. After installation, my truck’s steering felt tighter and more responsive, and I’ve noticed less body roll and smoother handling overall. Even potholes feel less jarring now. Installation was straightforward with basic tools. The pre-installed dust boots and the smart design of the ball joint head definitely made the job easier. Just be sure to check fitment carefully—this kit doesn't fit stock height models, certain "Classic" trims, or trucks with a 3.5" knuckle lift. If you’re looking to upgrade your suspension, reduce tire wear, and improve your ride quality, these control arms are an excellent investment. Highly recommend for any GM truck owner looking for performance and durability.

These control arms are very well made and feel solid right out of the box. The finish looks durable and the bushings seem high quality. They fit perfectly and made a noticeable improvement in my truck’s suspension. They were simple to install an everything was included. Definitely a great upgrade for the price.

PLEASE READ! Do not buy these. do no waste your money. I bought these approx 6months ago and I already had to upgrade. 1. Contact points to the frame are smaller that oem which means you will end up bending the frame it fits in to snug down. Which also affects alignment! 2. Cheap quality. Tubular design is not nearly as strong as solid core oem style arm! 3. DOES NOT support any sort of a lift kit. The ball joint angle on my 2inch lift was huge and casing a knocking. SUGGESTION: spend the extra $$ and get better quality! I went cheap and it cost me in the end !!

I bought for my husband they feel strong and well made him and his friend installed them on a Silverado and they fit perfectly with no issues and let me said If your truck has a lift these help keep everything aligned and stable after installing them the suspension feels better and he has been driving with them so far it’s good

Installed these on my sons 2019 f150 with a 2.5” leveling kit. Seem well made. Would like the bushings to fit a little tighter. Also one of the grease zerk holes was drilled wrong so I could not face it where it will be accessible once on the truck. Last but not least, if you run stock 20” wheels ( I don’t know about other size stock wheels) with larger than stock tires, they will hit these arms when you turn. That’s more of a me problem then a manufacturers problem but it would be nice if in the description it noted that aftermarket wheels may have to be used with larger tires. Other than that they seem like nice control arms, I guess time will tell.

These uppers were perfect. Installed them on my 2018 Silverado and got an alignment. I have 2in lower strut spacers and the shop said he nearly maxed out the caster adjustment to get the caster where it needed to be. He set it at +3.7°, but he said that was the correct angle, and within the range of adjustment. Barely. It was just very close with a 2in lift. He said a 3 or 4in lift would have kept the caster adjustment more in the center of the range. These look great. The zerts were a little difficult to get aligned, but I'll just loosen them and turn when I go to grease them. The bushings feel great. The bushing come unassembled but it takes literally 2mins to assemble them. Suspension is running smooth. No squeeks. No clanks. No binding. Plenty of articulation in the ball joint for my 2in lift. Very happy with them, especially at the price.

Easy Installation, got here 4 days early, and I got them Installed in only a couple hours. Can’t ask for much more

Update: About 6 mos 12k mi They are holding tight and look like new. No complaint on construction quality. However, they squeak like crazy. It’s embarrassing. I’ve lubed them so often and with so much grease I can catch handfuls of it. Yet, still crazy noisy squeaky. I’m not sure if the grease isnt somehow hitting a certain spot but it’s annoying as hell. I’ve tried a needle grease tip anywhere I could jam it. Same. Argh. Hoping it goes away. Original review They look very similar to many pricier arms from ‘specialty’ companies. The welds and finish look like great quality. Everything needed to install. No mods needed. Comes with grease and spare grease fitting. With about 2000mi on them so far, they have been great. No noise. Steering is slightly tighter/heavier feeling which increases confidence. They corrected the maxed out alignment for my Eibach lift. No more nervous steering g due to camber. Should also prevent the feathered/cupped outer treads on my A/T tires Says pre greased for a year. I filled zirks even more and. Few shots to the ball joints too ( under dust cap). Zirks are reachable through wheel wells for future easy access. Don’t over tighten the zirks. Use a thread locker when installing. Hopefully the metal holds up/remains safe( looks it). - I don’t rock crawl/off road but do see Northeast potholes. Hopefully the ball joints ( metal to metal design) hold up for at least a few years. And are replaceable with oem type.

Muy buenos la verdad quedaron muy bien y de sienten muy al momento de manejar mi Silverado 1500 2012 4x4

Easy to install. Zerk fittings ok. No issues with alignment with a 2" lift.

I have a 3" RC loaded strut lift on my truck and these fit perfectly! Great quality and solid heavy duty ball joint. Just make sure you have enough backspacing with your wheel/tire setup as you may rub at full lock. +1 offset on my setup gives plenty of room. Grease fittings should be replaced with better ones, as these ones seem to break easily. Otherwise great value!

Just what I needed but it was a bit tricky to get it installed. But it gave a nice lift after hours of getting it done by the mechanic

I was so pleased with this product. The seller ensures a quality product for an affordable price . That is easy to install. Certainly as advertised and still exceeded my expectations