ICECO VL45 ProS Portable Refrigerator, Multi-directional Lid, Dual USB & DC 12/24V, AC 110-240V, 45L Steel Compact Refrigerator Powered by SECOP, 0℉ to 50℉, Home & Car Use [Upgrade, 47 Quarts]

This is an amazing cooler. Use it at home as a beer fridge in the garage or in the box of my truck when I'm travelling/ camping. Jackery will run it for days, when I'm driving it runs off the 12v outlet I put in the box of the truck.

Very efficient, rugged, great design. Pulled 35watts to run in 40 degree weather and had no issue running off my portable power Bank and solar panel kit.

I tried using a Costway 55qt for about 3 years and although it was ok, I always had my eye on one of the Iceco “PRO” line products. That Iceco lid is GENIUS! Opens from either side. The Costway is a VERY inexpensive (compared to ARB) knock-off and might be ok as your first fridge. Even with the optional insulated cooler bag for the Costway, the dairy section got too warm (45+F) and the main section would sometimes freeze items. The indicated temp on the LCD display never came close to the temp inside the cooler. With trial-and-error and a BT thermometer and a second portable thermometer inside the fridge, I was able to get a mostly consistent 36 degrees. Enter the Iceco VL45ProS…with some surplus funds and circumstances (Prime Day sale) I finally pulled the trigger. The fridge arrived quicker than I expected and in perfect shape. The shipping box wasn’t damaged and the corners were fine. The fridge feels solid and heavier than it looks. I thought I wanted a dual zone but did not want the extra weight (and cost) and I already have a fridge slide that fits the VL45ProS (see quick note below). Quick note: in 2019, I bought on Amazon the Tuff Stuff 55QT fridge slide out. It fit the Costway with room to spare and has been perfectly functional. However, it is NOT wide enough to fit the VL45ProS, unless…you remove ALL 4 lower feet/corners. Initially kicking myself for not measuring this more closely, I decided for my application (mounted in a SUV on a dedicated fridge slide out) I did not see any issue removing the 4 protective feet/corners and mounting screws. If you want a slide out for this model, make sure you get one with inside dimensions that are at least 16 inches wide (16.25 to be safe). The 29.25 length of my slide out is not an issue. Removing the fridge from the box I heard the food basket rattle quite a bit and could tell this would make a lot of unnecessary noise. So, using ¼ inch rubber fuel hose, I cut 16, one-inch pieces. Then carefully cut a slit lengthwise so that the hose can be put on the thicker wire of the basket where it was contacting the wall. I am still able to lift and remove the basket and when the hose contacts the side, it just spins like a roller but stays in place on the wire. No more rattle! Since I already had a BT thermometer (SensorPush HT1) and Digital Indoor Thermometer (Accurite 00613) (bought both from Amazon), I didn’t need built-in functionality (Dometic or others). A built-in icemaker was also not on my must have list. I am hopeful that Iceco has made improvements over the past few years and that this will be a really great fridge. PROS (for me): Secop compressor with 5-year warranty Will operate at up to 40-degree incline/tilt AC plug is regular IEC (computer power cord) = no need for a special adapter/power module/brick Final Note: 12-volt sockets are not the most secure method to supply DC power to a fridge. No matter the fridge manufacturer they can get loose or come undone. If not having your food spoiled is important, then please consider where and how the power cable is routed and what is near it that may result in disconnection. Nothing will ruin a trip faster than a cooler that is off and no longer cooling (usually discovered after it is too late). Most vehicles turn OFF power to the 12-volt socket when the vehicle is OFF. Check your vehicle = never assume. 😊 Update on Issue: Lid Rattles I reached out to ICECO via email and they were prompt and easy to deal with. They sent a new lid as an attempt to resolve. I did confirm that it is not a redesign, but the same lid I already have. Excessive play in the latches and pivot pins are allowing for too much movement. Looking for the easiest fix, I applied 1/2 round adhesive "rubber feet" to all 4 corners of the fridge. The feet sit up about 1/8 of an inch high and fixed the issue seen in my attached video.

I put the iceco through a trial test in my house. I connected it to my jackery 1500 and it kept our milk, coffee cream and drinks cold for 4 full days and still had 30 percent left on the jackery. We probably opened it at least a dozen times a day. We’re very pleased so far.

works and looks great.