Fanttik E1 Max Electric Precision Screwdriver, 50-in-1 Precision Screwdriver Set, 2 Levels of Torque, 9.8 ft (3 N.m) Pen Type, Pop-up Case, USB-C Rechargeable, 5/32 inch Forward and Reverse Rotation, LED Light, Smartphones, Glasses, Camera, Watch, DIY Repair Tool Set

スタイリッシュで機能も最高使いやすい

I bought the E1 Max product along with the Fanttik X8 APEX Air Pump. However, I found that the E1 Max torque or tune functionality wasn't working as expected. There was no difference in torque for each mode. The ideal thing is to trigger a return which I did but whew! the return process vs price of product was not worth my time and effort. I love the design and ease of use of this product, I wish it was working as expected. It would be great to test all their products before being shipped out.

思ってた以上に静音で、高級感もあり、性能も最高です！少し気になる点としては少し強く降ると（縦方向）ドライバー本体が飛び出す時がありますが、そんなに乱暴に使うことは無いと思うので大丈夫です︎︎👍🏻︎︎

まず外装の艶消しアルミの質感が良い感じです。真ん中にドライバーが入っていて、その周りの箱を押すとビットが並んで詰まった中身とドライバーが出てきますが、なんとなくガンダム0083のデンドロビウムのウェポンコンテナっぽい印象でちょっとかっこいいな、と。 実際にスマホの外装やメガネの鼻あての掃除の為の分解と組みつけ、車のキー等の電池交換に使ってみましたが、その分には問題ありませんでした。 仕事用のデスクの引き出しにも収まるサイズで、かさばる感じはしません。

この小ささでこのトルクはすごい。 普段使いの機器なら大抵は使えます。 ただ収納用の仕掛けの耐久性がとてももろいです。 半年ほどで壊れました。

デザインも ねじの種類も豊富。 ピンセットや内装はがしのへらみたいのもついているのが地味にありがたい。 ドライバー本体があまりにも円筒過ぎて手が滑りやすく、ボタンの場所も目で見ないと探しずらい。 ドライバー本体に何らかの目印的なくぼみみたいのが欲しかった。 全く使えないというわけではない。 これのおかげで洗濯機に入れて、水没したアイコスホルダーを分解ふき取りして復活させることができました。 （星形の特殊ねじ TR４、５も備えているため）

デザインがとても良く、ほとんどのネジに対応できる点は非常に便利です。 ただ、少し硬いネジを回そうとした時に、ドライバーが少し回しにくく感じました。また、使い始めですが先端が少し削れているような感じがしたのも気になりました。 とはいえ、使い方次第なので製品自体は良いものです。様々なネジを扱う機会が多い方にはおすすめできると思います。

大変良い

Hasta el momento ha cumplido las expectativas, accesorios completos y de calidad asique guay

I have done a few quick tests to see if this is up to my expectations, and wow it it exceed them. Its powerful, compact, has extended bits, and has a very quality feel. I was worried that the bits would not be long enough, its been a problem I have run into even with expensive 100+ piece kits the thin extended bits that this comes with are going to be lifesavers no doubt. I did a quick test disassembling a GameCube controller, it had the tri tip bit I needed and unscrewed everything under its own power. I also tested some flatheads on light sockets, no problem. it put them back tighter than they were by hand lol. honestly this this is a STEAL for 50$ I had my eyes on a cheaper one for a while but I'm SO glad I went with this instead. I likely wouldn't have bought this at full price, but its a no brainer discounted. I only have a few small criticisms. because this thing is nearly perfect. my biggest issue is repairabilty, its why I got this in the first place. I work on LOTS electronics and gagets and 3d printers so being able to do something like replace the battery in the future would be a feature if it was truely perfect. I just remembered that it did my p1s hotend screws with a little effort, which was very nice, no more Allen keys! its possible that the aluminum tube chassis is removable, maybe it needs heat idk. its a problem for the future I guess. the only other thing I would change is really that I'd like more of these extended bits. They are just super nice and I'd like more sizes. oh if it had a bit of grip to it and maybe some texture on the buttons too, they can be a bit hard to find if you can't see. I did test some of my bits from another kit, some of them fit a bit too snug others for fine. none that wouldn't go in, but I had to wiggle them out. I included a video of trying to stop it by hand and it was pretty difficult. it really does have good torque. basically impossible to stop without a little more leverage (high torque setting in the video). I had held off on these for ages, as I had an "electric screwdriver" like 10-15 years ago that was so awful and thought they were all too weak and bulky to be useful. I expected this compact one to have so little torque it would be useless, the opposite is true it has plenty. it unironically has more torque than my brushed "electric screwdriver" I had ages ago, this was about 2.5in dia and 10in tall lol. the tech is there now, and the price is right. I've never jumped to give something a glowing review this fast before.

Molto utile e pratico, un buon prodotto fatto bene e resistente

I’ve been wanting one of these for so long, but it was always out of stock whenever I tried to get it. Finally, I managed to grab one, and it’s a must-have for any PC builder. The quality is excellent, and it comes with all the bits you'll need. The screwdriver itself isn't too powerful, which is perfect for building a PC—too much torque can damage your components. I’ve only charged it once since I got it, and it’s still going strong. I use it weekly, and it’s been fantastic!

Très solide. Et très pratique. Bon pour le service.