Huuger 55 x 28 Large Electric Standing Desk, Height Adjustable Computer Desk, 27.6" Deep Desktop, Stand up Gaming Office Desk with 2 Hooks, 3 Preset Heights, for Home Office, Rustic Brown

Very sturdy desk and large enough for my entire work setup. I love the ease of use in adjusting the height as well, I can go from sitting to standing and vice versa in mere seconds. Allows me to perfectly adjust it to my height while sitting, but I will say it is a teeeeeeny bit low at the tallest height for me personally... however, take into consideration that I am 5'11" and like my arms to rest on the desk when typing so it still is perfect for anyone a bit taller than myself and anyone shorter. Assembly was pretty straightforward, I did it by myself within about an hour. What sold me was not only the ability to adjust height, but also the power strip with multiple plug-ins, including USB which have been super helpful. The wood is super pretty as well. Overall, very worth the buy and I am in love.

This desk exceeded my expectations. It’s very sturdy and stable, even at full height, and the overall build quality feels premium. The materials are solid and well-finished. Assembly was straightforward and quick, with clear instructions and everything fitting perfectly. Once set up, it feels very reliable and comfortable to use. Overall, a great purchase and excellent value for the price.

After a bad fall messed up my back I needed a desk that I could adjust to a comfortable position during my work day. (I work from home and am at the computer all day). This desk is perfect for my needs. It’s quiet enough that I can move it on the fly without disturbing my client. The price made it a great value so it was kind to my budget. This is an awesome desk!

It took me a while to pick an electronic standing desk that was as big as my old fixed desk. Finally settled on this one from the reviews and the size. Assembly wasn't too difficult with two people. The look is simple and sleek. The legs are metal and feels well built. The top comes in 3 pieces and is quite thin compared to my old desk and when I lightly lean on it with my elbows, it makes creaking noises. The quality is good for the price but if you are looking for something super sturdy I would look for something else. Again at this price point, I can't expect a whole lot. I bought a separate desk mat to cover the top as I feel the paint will chip off very easily with normal use. The edges of the desktop are very sharp, it's not rounded. I've only had it a week so can't comment on the longevity of the motor. Hopefully it will work fine for many years.

Easy to put together and it goes up pretty high! It’s very sturdy and a beautiful color

Easy to put together. Nice and works perfect. I have monitor stands that clamp on the desk and work just fine.

Now that this desk is finally working, I like it. It looks good, feels stable, and it is holding my full setup without any issues. Performance-wise, it does exactly what a sit-stand desk should. However, the assembly process was far more difficult than advertised, and there is a serious setup issue that multiple other reviewers have also experienced. During the very first calibration, my desk went up normally, but once it reached the top, it began to rattle and would never attempt to go back down. The UP button became useless, the desk stayed fully extended, and the motors just chattered at the top. At that point, the desk was completely unusable. After reading reviews, I found several people describing the exact same failure. Many of them were sent replacement controllers. In my case, the controller was not the problem. The real issue was motor placement. I had to: Flip the desk over Remove the two middle support bars Reposition them so the motor was attached to the Z-labeled leg only Reassemble the entire frame Then restart calibration Once the motor was correctly mounted on the Z leg, the desk immediately worked normally and completed calibration without any issues. This step is absolutely critical, and it is not clearly explained in the instructions. The instructions make it seem like the motor can go on either leg. It cannot. I had a 50/50 and I lost. If the motor is not on the Z leg, the desk will go up, rattle at the top, and never come back down. The instructions need to be much clearer about this requirement. Additional honest notes for buyers: The motor is louder than advertised This is not a 30-minute solo build, especially if anything goes wrong The desktop is thinner than it appears in the photos Even with all of that, once fixed, the desk itself performs well, which is why I am giving it three stars. But the factory quality control and the clarity of the assembly instructions absolutely need improvement. I am leaving this detailed explanation so future buyers who hit the same “rES" stuck at the top problem have a solution.

First the good - the legs and frame seem to be a pretty sturdy construction. The power mechanism that moves the desk up and down works fine and it's relatively quiet. I like the ability to save up to 3 different preset heights. Instructions were fairly simple to follow and it was easy to assemble. The bad: the "wood" top is cheap garbage, and the laminate is fragile and peels off easily. When putting the top together (it ships in 3 pieces) I slid it across the carpet in my living room and one of the edges just started peeling off and I ended up having to glue it back down. I will be replacing the top with real wood from the hardware store at some point.

Exelente chegou rápido foi fácil de montar montei sozinho mas se você deseja tiver alguém para ajudar vai ficar melhor ainda. Se você for montar sozinho como eu montei, monte a base da mesa primeiro, depois monte o tampo em seguida, deixe q base já acentada na posição vertical e coloque o tampo por cima, a mesa ja vai ficar com visual de mesa pronta, então você deita no chão em baixo da mesa e coloca todos os parafusos. Caso você tenha alguém para ajudar você pode por o tampo no chão e colocar q base por cima do tampo, parafusar tudo e então com a ajuda de alguém você inverte q mesa, tirando o tampo do chão e o colocando parq cima. É super resistente super recomendo.

Atende bem, conforme descrição. Infelizmente, a mesa sofreu uns arranhões durante o transporte dos EUA até o Brasil, mas isto não é culpa do vendedor. A mesa é bem bonita, resistente e funcional. O manual e as ferramentas ajudam bastante na montagem.. parece um Lego

O produto chegou com o controlador da mesa danificado.