S14CPS 14" Heavy-Duty Metal Cutting Chop Saw | 3,500+ Cuts with EVOMAX14ST Blade | 14" Blade Compatible | Industrial Power Saw, Soft Start Motor, E-Brake, Precision Shadow Line Guide

The Evolution S14CPS 14" Heavy‑Duty Metal Cutting Chop Saw is an absolute beast. From the moment you take it out of the box, it’s clear you’re not getting a cheap or flimsy tool—this thing is built like a tank. The construction is solid throughout, and every component feels engineered for serious, long-term use. The soft‑start motor and e‑brake give the saw a premium, controlled feel, and the precision shadow line guide makes setup fast and accurate. Adjustments are straightforward, and the entire saw is incredibly user‑friendly for the level of performance it delivers. The EVOMAX14ST blade technology is top tier. Dry-cutting everything from thin-wall steel tubing to solid 1‑1/2" 1045 square bar is no problem for this machine—it powers through without hesitation, leaving clean, consistent cuts. Well done, Evolution. This saw is worth every penny and has earned a permanent spot in our shop. Highly recommended.

I have had and have been using this saw for the past two months and I am impressed with the quality of it's construction and power. When I first received it, I went right to work on the projects I purchased it for and it was able to cut 1/4' tubing all day long without trouble. When it came time to cut some 1/4' plate I ran into some trouble. the steel was 1/4' mild and 8". I could not cut the steel vertically, so it was on the flat. I was able to cut only a few pieces before the blade just wouldn't cut anymore. Being a time sensitive project, I ordered another Evolution blade so I could get it on the way knowing that even if it couldn't cut the plate, I still had lots of tubing to cut. I reached out to Evolution's customer service and once I explained the issue and the material I was working with and awaited a reply. Customer service informed me that they were sending a blade that would be better fitted to the application and at no charge! Between the operation of the saw and the customer service Evolution has a loyal customer in me after this experience.

Only had unit a short time, so this is an initial review. Will update over time. Unit is heavy, and heavy duty. Don't love the plastic handwheel on the vise screw or the fence angle adjuster. Not sure if there's a steel handwheel underneath the plastic; or if it's a plastic wheel molded onto the end of the leadscrew. Big difference. We'll see. Vise is cast and much heavier duty than the typical stamped steel you'd expect on a Milwaukee or Rigid abrasive saw. Soft start is really soft. Nice feature considering it's a 15A motor and you'll probably be running it on a 10-15A breaker and probably thru a long extension cord. Was expecting more from the spindle brake. It takes a solid 3-4 seconds to stop spinning. Guess that's fine, especially considering the blade guard does a great job fully covering the blade. I'm afraid the electronic complication of the soft start and brake will cause a breakdown in the future - we'll see. Shadow line is sweet. LED lights shining onto the blade causes blade to cast a shadow down onto the workpiece EXACTLY where the blade will cut. Simple, effective, accurate. Love it. Only made a few cuts thru 1" square 0.063" wall steel tubing so far. Using absolute MINIMUM down force, the saw cuts thru in about 10 seconds and leaves a beautiful finish. Cool to the touch and only a faint whisp of a bur that can be knocked off with a single light stroke of a file. So far so good!

The saw itself is perfectly fine. Upon receiving the new unit, I tested a few items I had laying around the scrap bin. 1" sq tube...fair but not fast. 2" pipe w 1/8" wall thickness. Probably a minute or more per cut. Very slow compared to what I've seen on other people's videos. I called evolution and they suggested I purchase the older, more aggressive blade.....NO. I decided to try a harborfreight metal cutting blade and I was able to chop a 1-3/4" piece of steel bar stock in the time it took the "New" 80tooth Evolution blade to cut the thin pipe. I'm sure the 66 tooth Evolution blade for another$100 would do fine....but I just paid Evolution $600 for a brand new saw with a brand new blade.. I'm not bashing the saw, but not impressed with the new black blade.

I’ve been cutting 3/16” x 6” wide metal plate into 2” pieces with an abrasive cut wheel on my 4” angle head grinder for students to practice welding on. That has been a terrible ordeal to say the least. It takes forever to cut a piece out then you have to grind the burs and sweep up the metal dust from the cut. Not to mention all the sparks you’re blowing out. But now - this Evolution 14” saw has made a world of difference. It cuts FAST, it cuts STRAIGHT, it cuts CLEAN. It does put off cut chips but much easier to clean those up. No more grinding off the burs or hoping the cut is straight enough to work with. I only wish I had purchased this a long time ago. Adjustments for angles are easy enough to set up. The shadow light is very accurate. It’s not as loud as I thought it would be. Plenty of power for smooth fast cuts. I’ve been checking for accurate degrees of cut and it’s all good so far. It seems to built like a tank. Nothing wiggles. It functions 100 percent like it is advertised. I should get many years of use out of this saw.

Best song I ever had if I ever need another this is what I want

Awesome saw so far. Cuts quickly and true. Soft-start and shadowline features are fantastic compared to others I've used. Hopefully this lasts me a long time as I enjoy each cut with it.

Absolutely amazing saw. Very heavy duty and great design.