UGREEN M.2 NVMe Enclosure, USB 3.2 Gen 2 SSD Enclosure, Tool-Free 10Gbps NVMe External Caddy, Aluminum PCIe NVMe Adapter, NVMe to USB Adapter for M and M&B Key in 2230/2242/2260/2280 SSDs

The UGREEN M.2 NVMe Enclosure is outstanding. The material quality is top‑notch, with a solid, premium feel that instantly sets it apart from cheaper alternatives. Installation couldn’t be easier - included mini screwdriver makes it very easy to just slide in and secure the SSD and you’re ready to go in seconds. Performance is excellent with full speeds, making file transfers fast and reliable. Sleek design, sturdy build, and simple setup all combine to make this the perfect external caddy for anyone needing fast and reliable NVMe-based storage on the go.

Very good quality item for using an NVMe SSD card as an external device. Light, but sturdy and fitting the NVMe is easy to do. Heat levels seem fine and transfer rates are good. Nice colour to blend in with most other items.

This is a great bit of kit, at a good price. I bought it has I needed to increase the size of the boot drive, a M.2 NVMe SSD, in my PC. I used this device to connect to one of the PCs USB ports to transfer the original image of the disk using Samsung Magician. It worked a treat, when I installed the new SSD in the PC it booted up straight away with no issues. This device now contains the original SSD which I'm using for temporary/portable storage. I already owned a UGreen product, a USB Multifunction Adapter. I was so impressed with this product that when I needed a M.2 NVMe enclosure I looked no further than UGreen.

My motherboard only has one NVME slot and as I have just added a larger NVME stick I now have a 1TB NVME doing nothing so this enclosure is rather useful. Installation is simple, though it is not a tool-free installation as advertised on the store page as you do require a screwdriver (supplied). Simply unscrew the small screw on the enclosure and slide out the main section, then install your NVME stick and screw it into place. There is also a thermal pad to attach to the NVME stick which is supposed to assist with dissipating heat but I still noticed that the enclosure got quite warm under load. Using the supplied cable (with a USB-C to A adapter) I had quite disappointing transfer speeds (40MB/sec). I'm not sure if this was the adapter causing the issue or the cable itself. However, when I switched to another cable that did not need an adapter my file copy speeds increased to around 500MB/sec. I am fairly confidident the cable used is capable of faster speeds so I would suggest the speeds are not quite up to those advertised. Even though my transfer speeds are far below what the NVME can do I am still quite happy with it as it still provides SSD copy speeds which will be fast enough for my purposes.

Delivered on time excellent product

Nice but throttle under load need thermal pads help but honestly gets hot under big loads but good design and functional

Works wonderfully as described

Sadly not a good experience for me, I had a spare M.2 hard drive that was used in my gaming PC spare so I thought to turn it into an external drive to back up things. Installed it into this caddy and managed to clean the drive using disk utility, then formatted it etc. Once I started to copy files it went downhill fast! I was expecting blistering speeds but this is not the case. The copy rate peaked at around 30mbps and fell to zero every 5 seconds. In the end it took well over 3 hours to copy 30gb of music. Meanwhile a 128gb usb 3.0 stick I have copied the same files in about 15 minutes with no drops. Returning today for a refund.

Funziona ed è fatto molto molto bene. Premessa. Avevo preso un "senza marca" economico e non c'era verso di farlo funzionare ma rimaneva il dubbio se fosse il modulo SSD (preso usato come nuovo) o il case. Continue disconnessioni e "idle" che mandava il sistema in freeze! Il case Ugreen invece funziona benissimo. Il case - bello solido in alluminio - si fissa con una piccola vite (e in dotazione c'è anche una vite di riserva), comodo per aprirlo e chiuderlo senza dover fare pressioni o altro. C'è un pad siliconico che si adagia direttamente sul modulo di memoria, vanno levate le due pellicole. L'ho usato trasferendoci quasi 150GB di continuo e non solo non ha dato problemi, ma non si è neanche riscaldato! Velocità di trasferimento alta nonostante fosse collegato a un usb 3.0 di vecchia generazione ma poi l'ho provato anche su un usb 3.2 gen 2 e tutto ok. Da tenere in conto: - Il case non fa riconoscere la marca della memoria interna ma ha il sopravvento, quindi l'utility dashboard dell'SSD non lo trova nel mio caso come SSD WD/SanDisk (ho montato un ED Black SN850X Gen4 con 1GB Dram) - il cavo non è lungo ma è ben fatto

boitier qualitatif. Le débit est là comme annoncé. Je recommande.

The performance is terrible. Tried it with multiple SSD’s but al show the same problem. Performance starts at reasonable speeds and then drops down to speeds below 100 megabytes per second. Happens on either Linux and Windows systems, used several machines to make sure it isn’t hardware related. Using the SSD in an other enclosure shows perfect balanced speed with larger and smaller files.

Comprado para reutilizar un viejo SSD NVMe como unidad para copias de seguridad. Viene con destornillardor y tornillo extra para la carcasa. Ligero, buen diseño, material aparentemente de calidad. Incluye almohadilla de silicona para el SSD. Todo bien explicado y fácil de preparar. Probado con puertos usb 4 gen 2 de tipo C, con estos no se obtiene una conexión estable, se pueden estar conectando/desconectando continuamente. Aunque puede lograrse pasar un pequeño volumen de datos.

Works but the included cable is garbage - would detect but would fail within a minute or so. After swapping the cable it worked great.