LINKUP PCIE 5.0 Riser Cable | for Vertical GPU Mount | ITX Double Reverse | Graphics Card GPU Ready | Usable with PCIe 4.0 & RX 9070/ RTX5090 | 18cm (Total Length: 20.2cm)

This riser cable is of exceptional quality. My Lian-Li Dan A4-H2O came with a cheap PCI-E 4.0 riser of dubious quality, and since I was building an all-PCI-E 5.0 system, it made sense to upgrade the riser as well. Thankfully it was easy to select the correct cable using the chart provided, and this one by LinkUp is an even better fit than the one it replaced. I was initially skeptical of the cable being shorter than the one that came with my case, however the recommended length was perfect. It installs without any slack, which should result in lower latency and less signal degradation. The shielding is much more stout, and I confirmed with HWiNFO that the riser is indeed running at full PCI-E 5.0 speed. Aside from function, it just looks like a much nicer part, which is important when you are building a new system with the highest quality components. A properly made riser cable should function seamlessly, and this one does just that. Highly recommended for any new build.

Great product, first one was a mistake, but they fixed the situation extremely fast. Sent the wrong one with a right angle connector, instead of reverse connector. But once the correct one arrived it’s awesome works without a problem at all. until my motherboard gave out, but that’s the motherboard, not the cable. I would definitely buy another cable in the future.

Works great, there’s lots of horror stories regarding riser cables out there so it’s good to have a reliable brand to fall back onto. Fair warning, the cable is super “crunchy” when inserting.

Above all, the good thing is the difference between cable quality and other company products. The cable length was also good because there were many options in detail, so you could choose the cable length with the most appropriate length. No matter how much I searched, I couldn't find an example of it on Ghosts1 mk3, so I spent a lot of time actually measuring it and asking the seller about it, so in conclusion, I chose the 20cm riser cable. Ghost s1 mk3 The length of the riser cable is too tight for 18cm, so I'm a little questionable whether it'll be mounted, and if it's 19cm, it'll be a little tight, and 20cm will be appropriate if you have a little margin. Regardless of whether you choose 19cm or 20cm, it looks very good. Is there a speed limit of crude rtx5060lp or connection speed on GPU-Z is pcie 850@x850 HWINFO up to 32.OGT/S, which changes depending on PC status, but when I googled it says normal PCIE 5.0 performance.

Great cable, very solid quality built. I have bended several times and no issues whatsoever, the only thing is that for the length this is some what pricy, so not a good value, however this give me no issue right out of the box.

This riser cable fit perfectly in my Lian Li Dan A4-H2O to replace stock cable which a lot of people seem to have issues with. The 20cm cable fit perfectly and allowed enough slack to make installation and removal easy, with flexibility to mount with or without the riser stand offs. I also have a PCI-E gen 5 GPU and the original cable was gen 4. Gen 4 vs gen 5 is probably not going to make much difference, but since I was going to replace the riser anyway, went with the gen 5. I originally ordered the 19cm cable based on other reviewers saying it was the perfect length for that case, but found it was too short for me to use in my build. The 20cm cable fit perfectly, with just enough slack to make maintenance easy and no excessive slack to have deal with. If you have this case, go with the ITX Double Reverse v3 20cm cable as it works perfectly at gen 5 16x speeds, had no clearance issues, and was the perfect length for the A4-H2O.

Less than a year after buying it, it has failed and sends my GPU into crash prevention and I can no longer use my pc without having my GPU run at 70% power

I thought the 19cm length was too short for my Lian Li Dan A4-H2O at first because I had trouble getting it to fit. The original riser that comes with the case is about 24-25cm length. The secret is to plug this one into the motherboard first and then wrap it around to the mounting holes on the back. The GPU end mounting holes are notched such that it will just exactly line up. Once I got it installed, everything worked with no issues. Was able to set PCIE speed in BIOS and tested in GPU-Z and confirmed my 5070 Ti is running at full 5.0 x16 speed. Good product and well made.

Spełnia swoje zadanie. Kupiłem do obudowy SSUPD Meshlicious, jest na nią minimalnie za długi ale nie jest to żaden problem.

Work well, very flexible. I use it for my SSUPD Meshroom V2, they ran out of the 15cm one so I have to use the 18cm but everything turn out great. My previous pcie 4 riser which is the one come with the case is terrible with signal lost, random reset, crash game, etc... With this one my PC running smooth as butter, quite pricy but it work well.

New 5.0 cable installed in a Jonsbo A4 mitx case. After working with Linkup rep, the correct length to buy is 20cm. I haven’t tested compatibility with mobo yet, but construction quality looks good.

Très bien. 20cm est un peu trop grand pour un miningeek S300 (un 19cm devrait être parfait). En v2 ça passe largement. En revanche le tarif...

En mi caso no fue lo bien que cabría de esperar para costar 100 euros... Intel Core i7-12900K, ASUS ROG STRIX Z690-I GAMING WIFI (actualizada a la última BIOS) y MSI RTX 5080. La gráfica funciona a PCIe 5.0 x8, que equivale a PCIe 4.0 x16, bueno, la pérdida de rendimiento es ínfima, sobre un 1%, pero costando 100 euros, quiero el máximo rendimiento que la GPU es capaz de ofrecer.