ARCTIC M2 Pro - Heatsink cooler for M.2 2280 SSD, with ARCTIC TP-3 thermal pads, compatible with PC & PS5, for dual and single-sided SSDs - Silver

I used this on the 2nd SSD in my PC. It has passive cooling as the mobo fan deals with the main SSD. I was hitting 70c+ when gaming and it was causing SSD 2 to disconnect. After adding this cooler I am NOT seeing temps greater than 60c even in the recent hot weather. No issues and no disconnects anymore. Good product!

Great value for money from a trusted brand I’ve used for 20years. Installed mine on a 2TB Samsung Pro in the PS5 Does exactly what it’s supposed to do.

Keeping my NVME nice and cool. I don't have a readable temp sensor on it but it's thermal throttling less. It was a tight fit - good for cooling but made it fiddly to put together. Good value for money - especially when it came with the thermal pad too.

I purchased it to use as a Heat sink for my PS5 around mid-February. It was sufficiently easy to install and is still working so far with no issues. Speed and quality are fine, can barely notice any difference from loading up from the PS5's internal memory. However, it does require a little pressure to disassemble, and the edges can be quite sharp, so it requires a little due care when installing the memory stick.

Very good heat sink cooling for any m.2 drive it really cools down a lot of the heat generated my the drive made use u use the 2 cooling pads. One under the m.2 and the other above. Follow instruction included by a QR code at the back of the pack or visit the website! U don’t want to miss these specs of u can ground the m.2 drive and kill the MB or the GPU!

Acer Predator GM7 M.2 SSD fit just fine, seems to run 5degrees cooler atleast

You would expect from a company such as arctic who are normally very good in the cooling department, However this M.2 heatsink has "Pro" in the name bit because they say it doesn't mean it's true at all, So what do we have here, And what are all of the problems (Everything) 1. The M.2 heatsink cooling fins are sharp when arctic say use safety gloves to install your ssd they really mean it, The problem is those fins are extremely sharp and even though I was wearing gloves it still cut through and cut my hand, 2. Unlike nearly every other m.2 heatsink that uses a small screw to secure the top and the bottom parts together (They supply the screw&screwdriver) This Arctic heatsink doesn't because it's "Easy" as it's a sliding mechanism, Really arctic please get some quality control on these because my unit is literally stuck because the metal is actually bent on the bottom part of the heatsink, So it's jammed, ( I know I can use two screw drivers to push and lift at the same time but you said it was an easy arctic with your none screw solution) 3. The packaging is awful because arctic thought "let's make it look a wrapper of a pack of gum" It doesn't scream quality product at all, 4. My unit didn't come with any thermal pads ( That's either a quality control issue at the factory when packing the heatsink) You need those thermal pads for heat dissipation from the m.2 ssd, 5. Anything that cuts you when wearing safety gloves is a problem, What this actually is......A badly designed heatsink, Causes injury for customers using said heatsink, I can't even pull mine apart because if I do with two screw drivers it will snap the metal in half, What's the worst part, The extremely terrible quality control, No thermal pads on my unit, Extremely sharp cooling fins, Absolutely 100% avoid and get yourself a vastly better heatsink with a great design such as as the Be quiet! MC1, Why the Be Quiet! MC1 you might ask well in the UK it's £4 more than this, For that extra £4 you won't cut yourself of silly sharp cooling fins, The MC1 will fit in the PS5 also, So save yourself time and blood coming from your hand while wearing safety gloves and buy the MC1 instead, The MC1 is the vastly better product, At least that came with thermal pads in the box,

As others have stated, these heatsinks seem better suited and fit better on single sided SSDs. If your SSD has memory modules on both sides, it can be difficult to snap the heatsink together because the thermal pads are too thick. In the end I swapped the supplied thermal pads with thinner pads to get the drive to fit. Doable but not ideal.

Happy with purchase. Looks good and seems to perform as needed and the price was great. Happy with it.

Excelente producto, todo encajo a la perfección, muy fácil de instalar y además de la bella estica, disipa excelentemente el calor.

cools just fine and looks good at the same time

もともと発熱は多くないKIOXIA PLUS G3（ヒートシンクなし）に乗っけた。 理由としては設置場所がグラボ裏になったため、たいしたことをしていない状態（notアイドル）で 50度を超えていたため。 気にするほどの温度ではないとも言いますが。 んで、搭載後は同条件５０度から３６度へ。元の熱容量が足らんかったですね、さすがに。 つけ方は簡単でサーマルパッドを付けて挟み込むだけ。非常に簡単ですね。 ですが気になる点が一つ。ついてしまえば問題はないですが……これ、どうやって外すんだろう？ ネジぎりぎりにつけたつもりがスペーサー側に干渉して、一時搭載不可に。（なんとか押し込んだけど） ヒートシンクそのものが大きくいっぱいいっぱいなので、その辺に自信がない場合は ねじ止め式とかシリコンリングとかのがいいかもですね。

Super nöjd