Mini Timer Time Delay Relay .1 Sec to 400 days. 3V 12V 18V 5A. Power on or Off Delay, Cycling and More. Compatible with B00PD65UGA

Needed to keep my solar powered lights on 5 hours after sunset. This timer was easy to program and works great. Let’s hope it will hold up.

I set these two timers up for turn signal/daytime running light (DRL) integration. They power my DRLs when I turn the motorcycle on and when turn signal is applied, they deactivate the DRLs and the integrated amber LED’s flash in time with the bike’s turn signal relay. Timers were set to Function 13, 1-second time-delay, trigger option 2, output reversed. Programming them was much easier than I’d feared and took me no more than 10 minutes. Very pleased with these and will buy more in the future. Much smaller and lighter than typical relays and completely waterproof. Highly recommended.

This is a quality product that the developers have clearly put alot of time into. Hand crafted from quality parts - wires are thick with nice strong insulation: they are even tinned with solder on the tips to prevent unbraiding. The timer is quite sophisticated and I'm impressed its capable of so many programmed functions for the compact size it is. I'm very glad I found this product, its exactly what I needed to discreetly charge a device for 10 minutes once a week in my vehicle. I highly recommend this product.

Purchased 20 of these for a project. User manual is a bit kludgey to read but once you do, units are easy to program. Factory support is good. Factory will preprogram them if you purchase a minimum quantity. Highly recommend them for personal and professional projects.

I use these in low power mode to extend power by a few seconds to boot up a LoRa device. Works great and really does have background power consumption of only 27 micro amps. Great for use with batteries. Does need a separate programmer, but it is easy to use. Once you have used one of these, you begin to see the many other uses possible. Well-made and worth the money. I do recommend these.

EASY to program. I have some remote Shelly devices that I want to sleep for 12 hours at a time. These timers are drawing very little current lass than a milliamp when off. Then a few seconds on. The wide operating voltage is a bonus. I am running 4 X 18650 batteries. I expect to go for months.

Was only able to program 1 of the 2 out of the box. Beyond return date because it’s on a project truck I am working on so I’m just getting to install. The side that works works great though and is just what I was looking for.

IF YOU FOLLOW THE INSTRUCTIONS TO PROGRAM THIS IT WILL DRIVE YOU NUTS!! THIS IS A GREAT PRODUCT DESIGNED TO TURN ON AND OFF DEVICES ALSO TO FLASH OR MANY OTHER THINGS. I BOUGHT IT FOR A SIMPLE JOB OF .5 SECONDS ON AND 150 SECONDS OFF THEN REPEAT, BOY WHAT A EDUCATION, I FINALLY FIGURED IT OUT AFTER WATCHING THE YOUTUBE VIDIOS AND READING THE BIGGG INSTRUCTION MANUAL. IF YOU ARE A COMPUTER PROGRAMER YOU PROBABLY WON'T HAVE ANY TROUBLE, I THINK, .. WHAT I FIGURED OUT IS THAT WHEN I WANTED THE TIME ON (OR.5 SEC) I HAD TO TOUCH T-1 TO GROUND, BUT WHEN I WANTED THE TIME DELAY THERE IS NO INSTRUCTION ON WHAT TO DO. THE INSTRUCTION SAY TO TOUCH T-2 TO GROUND BUT DOES'T TELL YOU WHAT THAT DOES, AFTER MANY HOURS OF TRIAL AND ERROR I FIGURED OUT THAT THE T-2 TOUCH TO GROUND IS THE TIME OFF INTERVAL AND IF YOU HOLD IT FOR 150 SECONDS IT WILL PROGRAM THE TIME OFF DURATION I WAS LOOKING FOR. BUTTT, IT DOESN'T TELL YOU THAT THE LIGHT IS ON WHILE YOU ARE PROGRAMMING THE TIME OFF. THIS THREW ME FOR A LOOP, JUST SIMPLE INSTRUCTIONS LIKE, TIME ON IS T-1 FOR THE SECONDS OR MINUETS YOU WANT AND T-2 IS THE DURATION OF THE OFF TIME BUT THE LIGHT WILL BE ON TO LET YOU KNOW IT IS SETTING YOUR OFF TIME. THEIR HELP LINE WASN'T MUCH HELP EITHER, THEIR ANSWER WAS WATCH THE VIDIO AND READ THE INSTRUCTIONS. I BET ANY BODY COULD NOW SET THE TIME ON AND DURATION OFF LIKE I DID WUTH THESE SIMPLE INSTRUCTION. YOU DO HAVE TO ADVANCE THE FUNCTION TO 5 FOR THE REPEAT CYCLE, AND EVEN THEN THE INSTRUCTIONS DON'T TELL YOU (DO NOT TURN OFF THE POWER TILL FUNCTION IS SET) AND THE FUNCTION SETTING WILL TURN LIGHT OUT TO ADVANCE WHILE GROUNDING T-1 AND T-2 AT THE SAME TIME, BUT DOESN'T TELL YOU THAT THE LIGHT WILL COME ON WHEN THE WIRES ARE REMOVED TO MOVE ONTO THE NEXT FUNCTION. WHEN DONE YOU MUST REMOVE THE INPUT POWER TO LOCK IN THE SETTINGS. THEN TEST TO SEE IF YOU ARE SET, I WAS AMAZED THAT THE TIMER WENT ON FOR.5 SECOND AND OFF FOR 150 SECONDS AND REPEAT, UNPLUGGING THE POWER AFTER THAT DOES NOT CHANGE THE SETTING UNLESS YOU REPROGRAM IT. THE USE FOR THIS FOR ME WAS TO REPLACE A SET OF POINTS IN A ANTIQUE CLOCK THAT PULSED TO GROUND ABOUT EVERY 150 SECONDS SO I GROUNDED THE POINTS AND PULSED THE VOLTAGE IN WITH THIS TIMER, WORKS GREAT NOW.