SSUPD Meshroom D Mini-ITX Small Form Factor (SFF) Case - Full Mesh Side Panel - Tool-Free and Easy Accessibility

Best little case ever, super efficient for air cooling, fun to build in and a lot of flexibility. A handy tip I would pass on is the internal power cable socket intrudes on the motherboard components. To get round the issue just take out the 2 screws holding it to the case and rotate the fitting 180deg and put the screws back in.

Surprisingly high quality and very easy to build in. You've got a lot of options for mounting fans and hardware almost anywhere you like, plus it can also fit a medium sized ATX PSU (would definitely recommend an SFX supply though). I managed to cram 3x 120mm fans and an 80mm fan in it with no issues. Additionally, the feet of the case can be moved to the top if you'd like to do an inverted build. In fact, they have extra holes for the power socket and for the power button so you can mount those inverted as well. Really the only thing I disliked is that the panels are a little fragile and can warp a little bit, and also the clips that the panels lock into are rather difficult to remove and relocate - but it's not bad enough to dock a star. Overall, if you're looking for a solid ITX case with lots of airflow, this is a solid option.

Could use more cable clearance for the GPU, so the cables don’t bend too much and so you can fit wider GPUs. Maybe the NR200 has that market covered. I wish the bottom weren’t just a mesh, makes it way less intuitive to pick up the pc which you might be doing a lot of since it’s an sffpc. Overall kinda easy to install and nice that it allows for full atx psu’s, though I went with SFX PSU. Would be good if they made a horizontally-mounted case like the SUGO05 From Silverstone, with the mobo lying flat and the GPU sticking perpendicularly up. Better for natural heat exhaust without as much need for fans, except maybe 1 intake and/or exhaust fan.

One word if you're new/experienced in ITX building....RESEARCH! I moved my iRacing PC from a Fractal Ridge case to this case because I need MAX SINGLE CORE performance from my 13600KF (that's how iRacing works, even at triple 1440p the GPU is only 50%-60% utilized), so I needed a case that focuses on cooling. Now the CPU stays happy at 5.4Ghz - 5.6Ghz (set to "Asus Enabled" on the mobo) at 1.21v @ 61 Celsius. iRacing now stays stable during the start of races, and fights. I prefer air cooling, as it allows better cable management (you can see in the pics), and air cooling technology has caught up or even exceeded AIO cooling nowadays. Other things to note: (If you have experiences with NR200 builds. Similar limitations when using a CPU tower cooler and a "fat" GPU.) -Silver Soul 135 (for 135mm height) CPU cooler. -Needed to use 180-degree PCIe connectors for my "FAT" 3080Ti. -A bottom-mounted slim 120mm fan to prevent GPU sagging to make this build work. (By default the case is setup for a 140mm fan, there's included brackets to make it 120mm.)

I've just finished setting up my gaming rig with these incredible RGB fans and my powerhouse 3080 GPU, and honestly, I'm buzzing with excitement to dive into some Forza Horizon sessions! The vibrant colors and the sleek design of the setup have totally transformed my gaming vibe. What's even more amazing is how this build, despite packing such a punch, is housed in a case so compact that it slides perfectly into my TV cabinet. It's like having a secret gaming beast hidden right in my living room, ready to unleash its power at a moment's notice. Can't wait to rev up the engines in-game and see this setup in action!

I have not been able to finish a built into this case. I spend 2 weeks looking things up to get this right and nothing seem to have gone that way. The biggest problem being the SFXL power supply and large 3090 FTW3 GPU taking up much of the space. The SFXL size and poor stock cables make it difficult to route cables. A C14S will fit in this case, but it will be difficult to plug in cables with it. Make sure the heat pipes are towards the ram on your mobo to solve some of these issues. A fan on the underside of the C14 will be preferable so you can mount two fans on the side as well. The biggest problem with my build is the power connector for the 3090. The bend in those cables stop the case from closing at all. I will be adding some 180 power connecters to try and fix that last issue, as well as getting a proper SFX power supply to see if the smaller size makes a difference. The case itself is not tool less as some people have claimed, but it is very easy to take apart and customize. some have even flipped the orientation of the case to make the GPU sit at the top, which i might end up doing as well. As another weirder note. I have gotten a number of metal splinters while working with this case. this is not something ive gotten from other cases in the past. With all that, I am very hesitant to return this case, i would like to make it work. After the new parts arrive i hope to get this case working or ill be switching to an NR200 with a bit more space.