SOMELINE Crimp Tool Connector Kit, JST-XH 2.5mm and Dupont 2.54mm Connector Set, 21 Types of Connectors, 30-20 AWG Ratcheting Crimper for JST Series,KF2510,Molex,AMP EI Series

I love the case. The crimper itself is very solid and heavy. The instructions are phenomenal. Fully illustrated and easy to follow. This crimper makes crimping very easy. Having never crimped before, i was able to make connectors within a few minutes. I love the variety of connectors and pins that comes with it. Great value for the price. I don't think i'll ever need another crimper. One thing to keep an eye on is when you're crimping, make sure the locking tab is not in the crimper, or it will get bent when crimping and will not lock in to the connector.

Works great! Bought secondhand some pc fans, and one out of them all had its connector piece ripped off from the pin. This made it easy to put new pins into a new connector, which allowed me to use the fan instead of tossing it. This comes with a little tip paper, which is honestly easy to read and helpful. Worth the purchase 100%.

Great product. Easy to use and comes with plenty of ends.

I found that I couldn't use this kit and returned it for a refund. The connectors were so very tiny, and with poor eyesite, I decided to just purchase pre-made wires whenever I needed them. However, the quantity and quality of this kit was impressive.

I ordered this kit to create connectors for robots with JST GH connectors, and at the end of the day I was able to crimp a a handful of my own cable harnesses. The components and pins all worked as expected, and I had no issues with fit or sizing. With that said, I greatly underestimated how difficult and time consuming it would be to crimp such small connections. It is VERY important to follow the included guide that describes the wire gauge and insulation thickness, otherwise it will not fit in the appropriate crimp channel. I found that the best way to get good crimps was to strip the wire so that only about 1mm of copper was exposed. then ratchet the crimp most of the way shut just enough to hold the un-crimped pin in place, then slide the cable in so that the insulation presses against the small shelf in the crimping tool, before finally crimping down. Paying close attention to position and length of wire made this a repeatable process. Overall I'm very pleased with the kit, included instructions, and the results.

The JST 1.0 connectors have unbelievably small crimp pins that you need to work with. It takes practice, expect to not get it right until the 5th try. If you are of a certain age, get some magnifying glasses, because you are going to need them! I have a crimp pin in D in the picture and one of the pins next to the crimper for scale. In the end I was able to repair the broken cable I had with this kit. The JST 2.0 connectors are likely easier to work with.

The crimper set with the selection of pins is just what I needed to rewire my Ender 6 by removing the troublesome breakout board. It took a couple of test crimps to correctly position the pin within the crimping jaw, but after that, perfect double crimps. The crimping tool is very well made and the ratcheting feature assures a perfect crimp.

Pros - quality, machined crimp head - nice assortment of connectors - helpful instruction manual - crimp pins are all loose (rather than in a strip) Cons - takes some practice to properly align pin in crimper - orange latches on organizer flip off

احتجتها لكم سلك عشان مشروع ما توقعت جودتها تطلع ممتازه و العلبه فيها رفوف تحط فيها أغراض إضافيه ساعدتني كثير في الترتيب الصراحه

Work well and provides a proper crimp for the metal contact needed to be inserted into the various JST connectors

Dit is een heel mooi en degelijk gemaakte tang. Het is even priegelen om die kleine terminals goed aan je kabel te krijgen. Ik gebruik daar een loep lamp voor. De set bevat heel veel fijne connectoren maar ik merk dat ik er toch altijd weer meer typen nodig heb dus er zal neg wel weer zo'n stetje komen.

Goede kwaliteit , tang en stekkers. Ze zijn best klein om te monteren op kabel, maar het gaat.

Als ich nach einer Krimpzange für JST-HX Verbindern gesucht habe bin ich fast vom Stuhl gefallen, als ich die Preise der Markenhersteller gesehen habe. Daher habe ich mich für dieses Set entschieden und bin sehr zufrieden. Die Zangen fühlen sich wertig an und funktionieren ohne Probleme. Zudem wird je nach Set eine große Auswahl verschiedenster Steckverbinder und Buchsen mitgeliefert, mit welchen man auch für kommende Projekte gut gerüstet ist. Die Verbinder sind natürlich keine Markenteile was sich auch in der Qualität und Verarbeitung widerspiegelt, reichen jedoch für DIY-Projekte aus. Für dauerhafte Installationnen würde ich jedoch Originalteile bestellen. Alles in allem ein gutes Set.