ISSYAUTO Third Brake Light Compatible with 2009-2014 Ford F150 3rd Brake Light Smoked Rear Cab LED Brake Light

The product was as described. There are no instructions as others have said. If your buying parts for your vehicle you should have a slight clue how to use tools and have basic mechanical ability. That being said the install should only take a few minutes. Remove the screws that are in it and use the screws from the light on the truck. Hold the new LED light next to the OEM light after you have removed the screws. Look at how the bulbs are arranged right to left. Twist and remove the bulbs from the old fixture. Take the 3 bulbs out and put them in your pocket. Hold the new fixture in place. Check that the wire ends on the new fixture plugs are routed up over the end straight. Plug them in where you just took the bulbs out of. Line up the notches and twist lock back in place the same way you took them out. I replaced it because I saw water running behind the OEM light and I like LED lighting. A bit pricey for what it is, but easy install quick shipping overall good shopping experience. Looks good on the truck and should keep water out of the cab. I didn't silicone the new gasket or put any adhesive on it. It is plenty thick so tightened it down well. Don;t over tighten or you will break the plastic. Go even amounts side to side. I would buy again (shouldn't have to if it lasts ) for my 2013 F150 5.0L super crew XLT.

This product was very nice would definitely buy again ..as others stated gasket to seal light is very cheap almost fell off replaced with weatherstrip and no leaks whatsoever..these are very bright leds they match my recon taillights perfectly..and looks nicer than recons 3rd brake light..you do not have to tap ,splice ,or solder they are simple to plug in took 30 seconds ...screws that come with unit are not for mounting purposes..they are provided to keep the unit together discard and reuse oem screws..do not over torque just snug them up.. mine did not crack I snugged up with light duty screw gun I recommend useing Phillips screwdriver... but my oem screw head stripped so I used a 6 mm. Socket to snug up .would recommend for the price it can’t be beat you won’t be disappointed .. Update : 1 month later and about 20" of rain later no leaks or yellowing.. lights are nice and bright ...the foam weather strip i used to replace is super soft and comformative it compressed to cabs mount perfectly and compresses super thin thinnner than oem gaket or gasket that fell off. When product arrived..would recommend .

This replaced the leaking third brake light on my truck. Mine is a 2010 f150 super crew cab. The installation of this light was incredibly simple. There are two prongs with bent wires. They dont look like the will work until you actually undo your third brake light. I reused the screws from my OEM in place of the bolts they provided. As well I used a clear RTV silicon to fully seal it up and endure no water will ever enter my cab again. Now, this looks absolutely amazing on my truck. Truly it does! However, it is not flush with the truck, like the OEM was. It sticks out about half an inch but is only noticeable from the side if you really look. As well, because of the darkness of it, its provides almost no light. Overall I am extremely pleased with this purchase. It took less than 10 minutes to install!

Purchased it in July 2021. Installed easy, looked great! Half of the lights stopped working this past December 2022. So it only lasted 1-1/2 years tops. Is that good? I mean I think it’s a inconvenience to replace it every 1-1/2 years. I guess I’ll look for something that lasts longer or has warranty’s to replace.

Installed this center/third brake light a few weeks ago. It was easy to install, only taking about 5 minutes. It looks good and works well. The cargo light could be brighter, but its at least brighter than the factory original. It also has been through a few rain storms and I have not seen any leakage. Very satisfied with this product.

Looks great! I used to have the stock housing with a three LED bulb setup inside. This looks much cleaner and sophisticated! The white lights shine just as bright as my old LED bulb which is not a deal breaker although I hoped for more brightness when working in the bed of the truck. Overall, still a good addition! I grew to like the space that the gasket creates, can always be adapted to sit flush but this feels reliable as is. PS use your factory screws!

I do not like the spacing, stock light fits flush to the truck cab and this one sticks out about 1/2 inch. You can see it was the design but it would be better to fit flush. The light could be brighter as I have had an aftermarket light on my other truck that lit up a good area behind the truck and the whole bed, this light only reaches the back of the truck bed. Brake light is bright and very visible in day/ night time conditions. Installation could not have been simpler! Plug and play, so simple a cave man could do it. Make sure to watch the video on Amazon for the product as to the product did not come with instructions.

WOW! IT HAS GOOD SEAL AND BRIGHT DAY LIGHTS SO EVEN AFTER CLOSE TO OR OVER A YEAY THEY ARE STILL WORKING WITH QUALITY ALSO EASY TO SET-UP!!

I was expecting more bright from this light but the fact is oem is brighter

You should probably replace your brake light seal by now if you haven’t. There will be nothing left. The seal costs $15, and this light is not much more and comes with its own seal. Very bright, easy install, get one now.

Perfectly replaced the stock one and performed really good.

Excellent! Love it. Very bright, looks great and fits perfect. Advise for anyone installing. Use the stock hardware (mounting screws) and remove the nuts on the back of the light. This will help it to fit very flush and tight to the truck. Easy fix for removing any space and making a great fit.

Good looking light, easy to install and the foam gasket looks good to produce a good seal.