Nilight 10016W DT Wiring Harness Kit for LED Light Bars - 12V On/Off Switch, Power Relay, Blade Fuse - 2 Leads

If you have a set of LED lights that didn't come with a harness , you can't beat this for the price. By the time you figure in the cost of the parts ( wire, switch, crimps/connectors, not to mention a relay if you are using one) to hardwire a set of lights, let alone the time to assemble, this set up is cheaper by far. harness length is ample, you get a pair of pigtails with connectors for a pair of lights, the relay, switch, fuse block and fuse, and ring terminals for power all assembled for what a switch and some wire would cost. Made everything quick, cheap, and easy.

This is a great wiring harness for LED lights. These come in one or two leads application. All that means is that they come ready for one or two lights, depending on your installation. The plug in connectors for each light comes with the set so that is a plus. I’ve attached a picture of the plug/connector for the lights so you can take a look at them. Although the relay is an “overkill” for low wattage LEDs, it’s OK to have it just in case you decide to change your lights for larger ones or halogens, in the future. In my case I will be using this harness in my motorcycle. It is very long for my need, which is great for cars, but too long for motorcycles since you have to remember that room/space is scarce in motorcycles. I ended up cutting the wires to my desired length and using heat shrink butt connectors and “glued” heat shrink covers for waterproofing the connection points. All in all these are great quality and I am very happy with them.

Worked great, easy to install

I used the harness to wire ditch lights on opposite sides of a full-size pickup (F150). The wire between the 2 2-pin connectors was about 18 inches too short. Fortunately, splicing the wires from the (Nilight) ditch lights and the included pigtails gave barely enough length to reach the connectors. The connectors are buried inside the trim channel for the cowl; I'd have preferred they were exposed on each side to allow for easy swapping of the lights, but I can live with it. There is more than enough wire from the first connector to the relay for my all-under-hood installation, but I didn't think to measure if it would reach into the truck bed. The harness is of good quality and is a very good value. It would be a 5-star if it weren't for that little length issue.

very affordable light install kit. worth the price just in the wiring connectors. I used this with my Nilight front bumper kit. i bypassed the button and wired high beam (+) to the yellow small wire. I did this so when the highbeams come on the light bar comes on. because with the stock arragement of this harness, the button continously draws power for the indicator LED

Always well done.

This is one of the best and easiest wiring system to install that I have every used. And the price is great!

Excelente

Used to wire a couple of flood lights on my cargo trailer. Very easy to install and the connections are solid. I run the lights off of a 12v battery, so I like this system as there is a connection only a yard from the switch. I installed the switch beside the LED light switch and it allows the connection to be a foot from the roof and allows me to disconnect from the battery easily when not in use. Thereby, removing any chance of slow draining the battery.

El arnés es muy bien ensamblado, la protección de los cables todo está perfecto. Lo que más me gusto fue que esta muy largo lor cables y más el cable para el swich. Puedes acomodarlo en cualquier parte del carro sin problemas. Con este arnés hasta sale barato comprarlo y colocarlo, que llevarlo con un eléctrico. Y los conectores DT son muy buenos.

Easy to install. Simple harness. Just have to hook your lights up and the rest is pretty much plug and play

Muy práctico para instalar, ni siquiera tuve que perforar , instalado en mi pick up.. todo excelente empezando por el precio

Had the switch professionally installed. Works sweet. Bought another for a friend