Bed Slats Center Support System | Adjustable Length & Height Tubular Steel with 4 Legs | Fits Full, Queen, King & California King Bed Frames

Amazing fix for a bed with older bowed mattress slats. My brand new very expensive mattress was low in the center and the bed frame squeaked like no tomorrow. The existing slats were bowed from age causing a lot of instability, as well as not properly supporting the mattress. This well built, easy to install solution was well worth the moderate cost and repairs an older frame to like new.

These slats effectively support my new hybrid mattress and wooden foundation. My old four poster bed has never had slats (bought used) and I didn't realize I needed them until I read the mattress warranty. After researching wooden slats I found metal options and decided on these. They were relatively easy to install though the directions were incomplete. Having read other reviews I was prepared with information omited in the instructions. A nice plus is that my double bed is narrow enough that I was able to use the slats separately. So I have four points of support accross the frame and placed the feet down the middle where the single bottom plank of the foundation runs lengthwise. Now the new mattress is fully supported and feels as stable and comfortable as the showroom model. Delivery was quick and trouble free. Also,I should add that the bed frame has 8 metal L supports (4 pairs) so I duct taped the slats to the metal supports. No drilling or rigging up wooden lenthwise planks as I had thought might be necessary. Foundation and mattress fit snug enough that I don't think there will be any shifting to the degree that might defeat the duct tape. Time will tell. Over all I extremely happy with the purchase

TLDR: Best of the available solutions, will work for its intended purpose, but a little tricky to get together and not the best quality components. If you have an weak or wobbly bed frame this is for you. You'll need a socket wrench and I want some protective feet for the floor. Ikea doesn't make the world's strongest products and this strong metal base gives extra support to bed frames. We ordered two sets for extra support with a King and it appears there is a misfit between the parts on one set either from the manufacturing process or being banged up by UPS. The seller was quick to respond to my inquiry on Amazon and provided some more instructions and his phone number and one set went together as expected. Other should go together after we file it down or bend it straight in a vice it's just an 1/8th inch or so shy of being able to go together even a rubber hammer might be enough to get it together. This is the best of the available products goes together reasonably well and provides a lot of support. Finish quality and supplied hardware isn't top spec but it should do the job and it's something that will be hidden from view. Instructions could be clear with better illustrations and it would be nice if a socket wrench and rubber feet or floor protector was included. Updating this review because it appears they will work as intended but is a little tricky if you're not the most handy or mechanically inclined person and it's obviously not a high-quality well finished product.

I recently purchased this slat support system for a bed in a guest bedroom. The item arrived promptly, it is well constructed, and the instructions for assembly and installation were easy to follow.

I am writing this as I stare at the screen with some bourbon in my hand. I could probably stop there, for those of you with some clinical acumen. But why. For the throngs of you who have rated this product so highly --- good for you. Not for me. Here's the thing. I never really thought it was possible to run out of curse words. Hyphenated, conjoined, completely made up ones. So, to all the engineers out there. Here's a question -- how many ways can you utterly, and totally, *&^% UP what should be one of the simplest assemblies, like, ever. We are now officially into hour 4. Seriously. I could have built an entire IKEA house by now. Are you kidding me? For starters: 1) Seventy bucks isn't a lot, but it's not a little either... for a couple pieces of poorly formed metal. 2) Having said that, could you not even assemble these two pieces of hellish, sharp-edged, non-attracting pieces of crap slats before you box it? Knowing how ridiculously difficult it will be for a layperson to do? With sharp-edged pieces of metal flapping and flopping about as you try to jam two things into one thing that is not big enough for the two things? 3) Having said that, the "cleat" as you call it is, understandably needing to hold said two freakish pieces tightly together. But, why would you make it a millimeter too small to accommodate said pieces of hell? What exactly is one to do with two freaking pieces of metal that you cannot conjoin? 4) The feet. Enough said. Are you kidding me? You could not make the feet one solid piece to be screwed in? Instead, you mysteriously include two bolts (no washers, mind you) but two bolts which will not -- and by will not I mean -- despite being tightened with a wrench multiple times --On both sides so, thats infinity x2 -- WILL NOT stay tightened. Why am I even having to place a bolt above the foot. Can you honestly answer that? How hard would it have been to make that foot solid. Are you kidding me? 5) Screws. The tiniest, petitest, most delicate little flowers they are. Seriously. to attach five pounds of whatever this crap is to a bed frame? 6) Are you kidding me? 7) I'm considering skipping the return ship and just asking for your corporate office address. I feel like, although they didn't work out for my bed, they are frightfully aerodynamic and would most likely get good loft. Until they hit your front windows I'm guessing. But then, they'd actually have served a purpose. Unlike right now.

I Absolutely Love these Rails. I had a problem with my Queen Bed tilting and wobbling at the top of the Bed. After investigating, I became aware that one of the legs on my original rails were bent. I found very few options available to replace my damages rails. Then I found Universal Bed Slats Center Support System and I am So Happy that I did. The Rails Arrived Promptly and were Simple to put together. They came with expandable rails for All Bed sizes and Heights. They are made of Strong Metal. I believe the rails are actually stronger than the original rails the bed came with. I have to confess, that I did have a problem with the fittings on one of the rails I received. That's when I discovered their Amazing Customer Service. I called and I left a message on the Customer Service number provided on the simple instruction page. My phone call was returned by the company owner. He could not have been more more apologetic. He explained that there was a factory problem that has since been resolved. He Promptly had a new complete rail set up ( more pieces I even needed ) shipped to my house. This kind of Customer service Is Outstanding. My bed is so completely solid now. My worries are over. I can even let my grandchildren occasionally "jump" on it with no Worries. Do Not hesitate to order these rails, as replacement rails or for added support. You can't go wrong. You will never find a more Professional and Honorable Company to deal with. Universal Bed Slats Center Support System Adjustable Tubular Steel with 4 Legs

I would give this product more stars if I had a queen size bed or smaller. This is supposed to fit properly for a king bed. The instructions show how far apart to space the legs from each other for king size beds, but it is not possible to keep the bar extensions inserted enough in the leg tubing at the recommended spacing. I don't understand how this could be overlooked. However, I went ahead and spaced the legs as far as I could from each other while keeping the support bars just enough inside the leg tubing, but this puts more weight on the weaker outer areas where the wood bed frame rails hold the support bars. Hopefully it's ok since we don't weigh a lot. The supports work very well as far as leg strength and keeping the noise down. But I feel a bit cheated paying this much for two sets for my king bed when they don't extend to the recommended spacing.

Great product! Simple instructions for easy setup. The set includes sturdy extensions and screw in bottoms for easy and solid adjustable height. Very lightweight. Works well with my full size bed. Sturdy! Strongly recommend.

Works excellent, Fixed out bed that came with flimsy wood supports. I do recommend buying 2 for a king size

Good Quality and easy to assemble and adjust for height.

Pros: Seem very sturdy, easy to install. Cons: the black paint flakes easily, and now little black flecks of paint are all over my bedroom

This bed support is absolutely amazing! I replaced the bed support legs/beam on my mom’s Queen size bed and wish I had purchased these sooner. What a difference?!!! The beam/legs that came with my mom’s bed didn’t reach the sides of the bed and were attached with an L bracket. When I assembled the first new support beam/legs I could tell the difference right away and used a level to make sure the support was even. I believe I was done start to finish 20-30 due to having to screw the legs in. I have wood flooring so I did put felt pads underneath the adjustable legs. No more creaking! Highly recommend!!!

Great product! We have a 14yr old bed from Ashley furniture (press board product) that the metal supports under we’re not holding up anymore. We were not looking to invest into new bedroom furniture right now and this product saved our bed. We thrashed the old, broken supports and installed this product in its place and the bed is more solid than ever. Happy to have a few more years of use out of my bed set ! King size bed and ordered two sets.