SUNBA Outdoor PTZ Analog Camera, 22X Optical Zoom, 960H CCTV Security Dome Camera, up to 328ft Night Vision with RS485 Control (405-22X)

Excellent Camera, Good Picture, Good control

I use the camera on the front of my house to check on my car. It has already paid for itself by identifying a vehicle that hit my car and didn't stop. The ability to rotate the camera and zoom is invaluable as I don't always park in the same place. My only criticism is that the image isn't as sharp as I would like. After-sales service from Sunba has been excellent and they provided a new camera module when the original failed. Robin P. , Technical Director at Sunba, helped enormously in identifying and resolving my problem.

After nine months of use, the picture deteriorated with horizontal streaks and horizontal lines appearing, and when it swung upward and stopped at an inappropriate position, it could not move up to the end, but I received a refund. Thanks.!

The 960H camera is bigger than expected. Can't speak about the camera performance as there are few issues to address before installation. These are (a) the camera has a two pin EU plug on its power charger (and no adapter included) (b) there are no accessories: no masonry fixing bolts/screws or wall plugs, 3 in 1 lead is not included. The wall mount bolts required at the top differ from those required at the bottom. There appears to be a difference between the power adapter voltage required: 4 amp on the power charger while the camera requires 2 amps (don't know if that makes a difference) shall find out shortly hopefully. I shall re: review once I get to test the device. Really, pleased with this device, in comparator to the other cameras I have it is has the sharpest image of all of them, with really vivid colours I've found the customer service to be really helpful and professional. They were more than willing to assist me with set up and troubleshooting controller issues. All round thumbs up.

hello straight forward easy to wire.only issue i had installing was the polarity of the rs 485 ptz wire.(on mine for some reason the brown core was - and the blue core was +).once sorted worked bang on. - for this reason alone it may have had some bad reviews.i think some of the previous bad reviews are due to diy folk not installing correctly?? .so i would take some reviews with a pinch of salt.its a great little ptz dome camera.good picture and half the price of others!.very happy so far.but time will tell.i only gave 4 stars as its just been fitted.so unsure on life span.

Picture is OK not the best looks abit blury but cant change any settings on the camera and alot of lines on screen at night when Zooming in

Few problems at first but contacted the seller and was sorted straight away very happy and camera is very clear.

Brilliant cameras, the night vision is clear and distance 100 metres, nice and clear

So far this camera is awesome! My son mounted it on my radio tower about 65 feet up,i used "VENTECH 100Ft PTZ Power Video & RS-485 Data Control Cable Professional Extension" and ALITOVE AC 100-240V to DC 12V 10A Power Supply because seems all negative reviews had to do with power issues, all the hookups and dvr connections went smoothly, the picture and zoom are beyond my expectations in every way, the night vision is beyond expectations as well, i can literally see a bug on my mailbox at 125 yards in the dark, a bunny rabbit all way to end of my drive 200 yards away and make out the pupils of his eye!, read a car tag at 200 yards in the dark.. this thing is like a telescope you can control from inside from your dvr, so far im giving it a 110% satisfaction rating as long as it holds up..i got the 3 year protection plan just in case. My son says it is like the "all seeing eye" on lord of the rings movie, i cant imagine the 50x they sell,id love to have that buy it,its worth every penny...i will post some photos later on

Camera worked great when it was first installed. I used the supplied power transformer as suggested and ran 16 gauge wire for added protection against power loss. Great quality image day and night. I was really pleased with my purchase until the video was lost. Pan and tilt still work but no video to my VDR. I emailed the company for product support. I’ll update this review once I hear back from them.

I was about to return this camera because it had lines in the picture and it would not pan or tilt after dark. Come to find out it's not the camera's fault. Due to the power demand of the PTZ plus the high power IR LEDs it CAN NOT get enough power thru a standard video/power cable. The 2 power leads in the cable are only 21ga and just can't do it. One solution is to put the AC adapter near the camera (extension cord?). Another way is to run a 2 conductor, 18 ga wire from the AC adapter to the camera. The problem is not the size of the AC adapter but the undersized power leads in a video cable. So far I have not been able to find a video/power cable that has 18 ga power leads. I am impressed with the camera and especially the night vision. And I do not impress easily. BTW fixing the power problem also fixed the problem with lings in the picture.

WORKS GREAT! Does not have night-vision or IR for darkness, but works amazingly well. It's been up for 3 months or so now and I've only had to reset it one time. Not a bad performer for this price. IMPORTANT TO KNOW: When swapping out your old camera for this one, you must be sure you have 12vdc!!! If not, Amazon has a cool little 24vac to 12vdc converter module (I am using in my install) that makes this conversion a snap. Just get it too along with this camera to be sure you have your voltage-ducks in a row.

The feature to have the camera pan to preset locations automatically doesn't work well. After a few hours something happens and the camera starts going to the wrong spots.. like it lost track of its current position and then goes to the next preset location incorrectly. I tried to work with support on this issue but they blamed everything else other than the camera. they blamed cable length or gauge of wire causing not enough voltage for the camera. I used very premium wire and shortened it and it still has the issues, I even turned off infrared to lower the power the camera uses. Still didn't fix the issue. Moving the camera to random locations works fine but after using presets for a while it goes out of whack. Also sometimes camera gets stuck in up position, sometimes I am lucky enough for it to get unstuck itself, but sometimes I have to go up on my roof to manually force it to a position it will move again. When moving the camera manually by hand you can tell if it gets to the up position it will get stuck, something is wrong with the design.