Milomdoi [2+3Pack] 9H for Samsung Galaxy S23 Ultra Screen Protector Tempered Glass Accessories, 2 Pack Full Coverage Screen Protector for Samsung S23 Ultra 5G 3 Pack camera lens protector case fit

For the love of all that's holy, if you value your phone and your sanity even a little, DO NOT BUY THIS HOT STEAMING GARBAGE! I bought this screen protector for my S23 Ultra mainly for the lack of the ugly fingerprint circle that most others have. I read the other reviews and weighed the negatives vs the positives. Based on most negative reviews, I figured that installation and bubbles would be the biggest issue. Nope. Watched the video, followed directions, and had no problems. So I chalked the negative reviews up to people not following directions and figured I got a great screen protector and went on about my life. For about a week. The only real complaint I had was that my screen wasn't as responsive in some areas, especially around the edges. I even had touch sensitivity turned up. Then my phone fell about 3 feet off the bed onto carpet. Imagine my surprise when I picked it up and there was a straight crack down the entire length of the protector. I figured it as a fluke and thought "oh well, I got a 2 pack so I'll replace it." This is when the fun began. I used the little blue lifter tool that came with the kit, and geeeeently started removing the old protector by lifting at a corner. It started coming off easily just like the thousands of other glass protectors I've used on previous phones. Then, CRACK! The protector shattered across the entire surface and sent tiny microscopic fragments of glass flying. Some hit me in the face, so I had to grab some glasses for fear of getting hit in the eyes. I've actually become a great fan of my vision in 30+ years, so I was hoping to keep it. Every time I tried to lift a section, another part would crack, so I had to take it off in pieces. 20 minutes in, the only part left was right in the middle of the screen. The 2 inch portion of cracked glass had made the center of my phone's screen its home and had no plans of leaving. It took another 20 minutes, 5 different tools that wouldn't scratch my screen more, 3 glass splinters,1 cut, millions of glass shards all over my countertop, and 50 swear words for it to finally release its death grip. Once I finally cleaned the leftover residue, I could see that my brand new phone is covered with scratches all over the screen. Good luck trying to reach out to the seller, they don't care that you religiously followed all of their directions, it's still clearly your fault that their product damaged a brand new $2000 phone.

This is a long overdue review and I'm seeing now that it's currently unavailable. I'm really hoping that's not the case for long because this really is the best screen protector I've seen for my phone. I was so happy with this, i bought 2 more just to have in stock and I have one to my boyfriend after he got the same phone. Why did I pick this product?: Every other screen protector for the Samsung S23 Ultra has that weird fingerprint circle on it. This one also has no hole for the front camera which I love, because sometimes dust can build up in camera hole and it could be hard to clean. This also ensures the camera glass doesnt crack. It also seems amazon sometimes mixes up reviews because during my search there would be positive reviews for other things under a screen protector listing, or negative reviews for a screen protector that looks nothing like the listing shows, making the ratings weird to read. That seemed to be the case for this listing, so i was hesitant at first. But I took a chance because it was on sale and there was no other protector out there that didn't have the fingerprint circle. PLUS this one came with an installation kit. Coverage: I use this with a case. As it is a curved screen, there is no case that can fully protect the screen, unless you get one of those boxy cases with a built in screen. This protector gives me some assurance that I will never have to pay to get my screen replaced. It covers the screen completely with a little but if space above where the camera is, but barely any. Protection: I dropped my phone once when i was getting out of the car. I had my phone on my lap and didn't realize until I got out and my phone slid off my lap and onto the concrete. The screen cracked but not very much- just on the side that hit the floor. Application: The application kit was SOOO useful. It helped me make sure the screen was properly aligned. This is my first time having a phone with a curved screen like this. My super old LGV20 has a very slightly curved side, but it was just the glass on the front and the actual phone screen didn't reach it. Anyway, I was nervous to get it aligned with the curves, but it was a breeze with the kit. I didn't install the camera protectors on my phone since I bought separate camera protectors, but I did on my boyfriends phone. It was very easy to line up and press down. Removal: I was worried about removing the protector since some reviews said the screen was hard to remove and left a bunch of adhesive on the screen. I did not have that problem at all. It removed with ease and took all the glass pieces from when i dropped my phone with it. It left no residue on my screen at all. Same with the camera protector. My boyfriend has yet to get a case, and he dropped his phone leaving some cracks on the camera protector. The cameras were just fine. I used the prying tool to easily remove the protector and left no residue. I applied a new one super easily. Overall: i really hope they start selling this again because i would have stocked up more if I knew they were going to be unavailable. I'm glad I took a chance despite the bad reviews.

Ho provato diverse protezioni per schermi, soprattutto vetri temperati, e devo dire che questa è stata la peggiore in assoluto. Inizio premettendo che non ho provato le protezioni per le fotocamere. Lo avrei fatto, ma purtroppo consistono in un pezzo unico (invece che protezioni per ogni signolo obiettivo) che le rende quindi non compatibili con ogni cover posteriore, come nel mio caso. Per quanto riguarda le pellicole: la colla che utilizzano per attaccarsi è davvero eccessivamente forte, rimuoverle dallo schermo rischia di danneggiarlo, di rompere le pellicole stesse e di ferirvi. L'applicazione inoltre richiede una forza anch'essa eccessiva a parer mio, sembra di dover sfondare lo smartphone, ma facendo diversamente si incollerà parzialmente lasciando bolle ovunque. Tra l'altro è un metodo che non ho visto utilizzare su altri vetri temperati, non capisco perché farlo così. Una volta applicate, altri problemi: coprono la fotocamera frontale (e la differenza nelle foto purtroppo si vede, decisamente sgradita su un telefono famoso per le sue fotografie), rendono faticoso l'utilizzo del sensore di impronte digitali, che sì funziona ma male, quindi è un'altra buona caratteristica del telefono persa, e poi la pellicola in sé non è piatta, ma concava, cioè ha le parti laterali più spesse (dove anche il touch fa più fatica, nonostante la sensibilità aumentata dalle impostazioni) e la "colonna" centrale più sottile, cosa che si vede e si sente al tatto, oltre al fatto che osservandola quando viene colpita dalla luce ha un aspetto molto plasticoso e di bassa qualità, mostrando le immagini riflesse sullo schermo molto deformate. Qualcosa in più sulla mia esperienza personale: Il primo tentativo di applicazione è andato male, ma nonostante si fosse incollata solo in parte, rimuoverla è stato faticoso, portando anche alla frantumazione del primo vetro, che ha sparso frammenti ovunque. Al secondo tentativo è andata meglio, ma sin da subito ho iniziato a riscontrare i problemi citati prima. Aggiungo: dato che ha una cornice nera, va a coprire lo smartphone anche oltre il display, rendendola però meno adatta all'uso con cover. Nel mio caso la Spigen sollevava questo vetro temperato. Quando, dopo alcuni giorni, per tutti questi motivi ho deciso di rimuovere la pellicola e sostituirla con una di maggiore qualità, ho avuto il colpo di grazia: la pellicola appena tolta e poggiata accidentalmente sul tavolo di vetro dal lato della colla, si è attaccata così saldamente che per toglierne tutti i pezzi (ovviamente si è frantumata anche stavolta) ho dovuto usare strumenti per raschiarla via e guanti, dato che graffia abbastanza facilmente. Mai stato più scontento di un vetro temperato o pellicola in generale, soldi buttati. Vi consiglio vivamente di puntare su altro e per questi schermi curvi preferibilmente pellicole flessibili in TPU, si trova molto molto di meglio a prezzi talvolta addirittura minori. Queste pellicole non sono scarse, sono vergognose.

Vorweg: Dieses Schutzglas ist eine absolute Enttäuschung. Ich würde es nicht mal verbauen wollen, wenn ich es geschenkt bekomme. Meine Amazon Einkaufshistorie zeigt mir, dass ich bereits über 20 verschiedene Displayschutz-Produkte gekauft und somit auch (mehrmals) verbaut habe. Ob Folie oder Panzerglas, ob für Handy, Tablet, Uhr oder sogar Thermomix...keine davon war so schlecht wie dieses Produkt hier. Ich habe also durchaus auch genug Erfahrung, um ein Panzerglas vernünftig anzubringen. Dieses Produkt hier ist durchgefallen wegen - Nicht funktionierenden Fingerandrucksensor. Ja, ich habe die Anleitung gelesen. Ja, ich habe die Sensibilität des Fingerabdrucksensors in den Einstellungen auf Maximum gestellt. Ja, ich habe meinen Daumen statt wie gewohnt einmal, sogar mehrfach eingescannt. Dennoch funktioniert die Erkennung nur in sehr wenigen Fällen. Zudem kann das S23 Ultra ja auch nur 4 Abdrücke speichern. Man verliert hier also auch die Möglichkeit, mehrere Finger zu speichern (Beide Daumen + beide Zeigefinger sind eigentlich mein Standard) - Die Folie ließ sich nicht blasenfrei anbringen. Das schieben der Luftbläschen funktionierte bei diesem Glas wesentlich schlechter als bei allen bisher von mir verbauten Produkten. Evtl. liegt es an der Klebeschicht!? Da kommen wir auch direkt zum nächsten Punkt. - Durch die Klebeschicht ist ein Entfernen der Folie sehr schwer bzw. es besteht die Gefahr, dass ein Teil des Glases einfach auf dem Handy verbleibt. Dieses hauchdünne, gesplitterte Glas dann zu entfernen, muss richtig Spaß machen. Siehe die andere Bewertung eines Nutzers. Durch dieses Foto bereits gewarnt, habe ich es mit sehr viel Vorsicht geschafft, das Glas komplett zu entfernen. Allerdings war meine Folie auch nur 4 Stunden verbaut. Ich möchte gar nicht wissen, was das für ein Abenteuer wird, wenn man das Teil erst nach 1 Jahr runter macht. Fazit: Große Freude mit dem neuen S23 Ultra, großer Frust mit dem Displayschutz. Ich würde nicht mal einen Stern vergeben, wenn dies möglich wäre.

Am used to this type of screen protector installation, have done it multiple times in the past on previous phones with no issues... upgraded my phone so needed to pick one up, and this was the only one I could find that was a simple installation without a fingerprint circle. Figured the bad reviews were from people who weren't being precise with their installation... but no the reviews are warranted. My first attempt, everything went smoothly, had no bubbles whatsoever. Then after several minutes, bubbles just started appearing on the screen, with one of the corners completely coming up no matter how much I held it down. Not acceptable for me so I removed it and tried again thinking it was my fault. Second attempt, I go through the process of cleaning it and getting it ready, and the same thing happened with the same top right corner refusing to stay stuck down. To note the top-right corner is the one that has the green pull tab for the protective layer, and on my second attempt I noticed the glue almost detached from the screen when pulling it off so this was surely the reason why I was having this issue? Overall seems like there is problems with the adhesive being used. Can't comment on whether the screen protector is durable as I only had it on for about ten minutes. Don't recommend.

He visto varias veces el video. Leído las instrucciones. Todo preparado. Me pongo a pegar el cristal y una esquina queda un pelín levantada. Con cuidado intento ajustar... se quiebra. No entro en pánico y recuerdo que al principio del video viene cómo quitarlo. Lo intento mientras sostento el cristal para que no se pegue ni quiebre más... :( No tengo fotos porque obviamente. Temo que a pesar del cuidado voy a terminar con la pantalla con marcas. Muy triste. Durante el proceso se ha ido quebrando el cristal, a pesar de intentar levantarlo y despegarlo cuidadosamente en paralelo... :( Actualización: He conseguido terminar de quitar los restos del centro de la pantalla. Efectivamente mi pantalla ha quedado arañada, a pesar del cuidado, de usar aspiradora a cada movimiento para que los fragmentos no arañasen. Lo intenté con el segundo cristal. Quedaron muchísimas burbujas. Fue un momento: "Debo ser yo". Intenté con cuidado sacar las burbujas, había demasiadas. Las más difíciles unas en el centro... imposible. Seguí las instrucciones para sacarlas, pero no hubo suerte. Desgraciadamente, al intentar quitar las de otra esquina esta se quebró... con lo que game over. Consejo / Lecciones aprendidas: 1. Mejor ir a un sitio y que me lo pongan 2. Si se rompe y debes quitarlo: usa ***hilo dental***. Es lo más fácil para despegarlo. Levanta un poco y ya vas moviendo el hilo hasta que lo despegas del todo. Ojo, esto sólo sirve para el caso en que no vaya a volver a pegarlo. Ojalá se me hubiese ucurrido antes. Suerte.

Overall thoughts : This is a tic more complicated to apply than other screen protectors, even compared to expensive liquid + uv light applications. However, this is a superior product in terms of price and overall installation. If you screw up, you might, it will not cost you much to get another set to reapply. 20$ AUD? Done, I'm in. Approximately 1/5 the cost of more expensive products. Just take your time, do it right. My first application wasn't the greatest. My mistake, touched adhesive with the plastic tool which affected the adhering of the corner. Is what it is, but not unhappy. Recommendations: 1. Watch the video, at least 2-3 times. 2. Watch the pressure you apply in certain instances of application. 3. Go slow! Take your time! Update : Application one, I messed up. Had my tool touch the adhesive on the inside, which created a weak point in the corner, resulting in the first screen protector to start lifting up on one side then was useless. Update 2: Application 2 did a better job, but as you can see, there are gaps and bubbles. No dust particles, but still not great. Updated thoughts : I think it's a good attempt at a product, but some skill, patience, and finesse are required for a good application. It is very finicky. If the adhesive is disrupted, then it will affect the adherence to the screen. Going to look for an alternative product. I will say, the rear screen protector is fantastic though Update #3 - started lifting again on the front. Replaced with a different third party screen protector. Recommend them instead of this one.