Novus #2 Plastic Polish Scratch Remover, 237ml

Used this to take scratches on our motorhome windows and it was excellent. The scratches were light so I don’t know how effective it would be for deep er marks. Also worked well on the plastic bumper

Really good product, I used a tiny amount and the result was astounding. Its easy to use, it removed the scratched edge, and as you only need a little, its value for money.

I bought this to try and reduce the little marks left by a slot cd on the silver side of cds. I read that the more expensive slot cd were no longer are no longer rough on cds but apparently not. I have tried a few products with little or no success but this one at least works well with scratches that are not too deep.It also has other uses which I have not tried out yet.So it is a useful purchase.

Polishes minor scratches out of polycarbonate completely.

I took a chance on this to try and remove some fine scratches I had created on our outgoing dishwasher plastic door trim to try and spruce it up (I stupidly used the green side of one of them sponges!). I can see that using this cream did help a bit after multiple attempts - of which I finished off with their shine spray (not sure it did much itself) but it didn't remove the evidence of my scratchy ways. So, 3 stars from me... it helped, but not as much as I expected it to - especially for the cost!

Very pleased with this product hubby scratched the caravan paint work and put some on a cloth wiped it on and buffed it off scratches gone and the same on the windows when I cleaned with a non scratch sponge which did leave scratches but the polished removed them..

Its easy to use and gives a good shine after. But its really not effective for what a customer would buy it for, It barely does anything to surface scratches and doesnt remove any noticeable light scratches using a micro fiber cloth with alot of effort and patience it was slow and didnt give results. I can really only see it being useful you have an old plastic surface that has a grey haze over it

Fantastic at cleaning and reducing scratches

Utilisé pour polir le corps d un écumeur en PPMA, très efficace après plusieurs passages.

Gebruik dit al jaren maar is de eerst keer dat ik het bestel via amazon , top product .

Bra produkt fungerar mot mindre repor på Vinylrutor på tar bort rester av impregneringsmedel och annat kladd. Läs test: https://www.practical-sailor.com/boat-maintenance/whats-the-best-way-to-restore-clear-plastic-windows

ho usato questo prodotto per lucidare e togliere piccoli graffi (poco profondi) e opacità da un parabrezza di un aeroplano in Pexiglass con risultati soddisfacenti. Non è a mio parere da usare su materiali tipo lexan che hanno una superficie meno dura . Un buon prodotto.

Great polish for fine scratches. I have used it on headlight covers (typically poly-carbonate), ABS, Clear PVC and it has done well on all of them. The depth of your scratches is what determines how course a polish you use. I start with a finer polish and if it doesn’t do the job then use a courser polish. Novus has a number 3 (courser polish). You always have to use the finer polish after the courser polish so you have to use the 2 polish again, but it is an easier means of telling which will work. I would be hesitant to use this on a touch screen as there can be invisible circuitry (indium tin oxide) very close to the surface and what the material is. Unless you know and understand the tech then usually best not to mess with it. Heating trinitrotoluene on the stove would be bad if you don’t know what you’re doing. It’s TNT. It does seem to leave some coating on the surface but it is NOT like many of the ‘wipe on fill type’ product to improve clarity that don’t last.. If you don’t have to rub it (or shake the bottle) then it isn’t really a polish. And while it might take a bit longer than the chemical melting wipe on type, you have much more control and less chance of messing up the surface. At worst (unless you go too fast and melt the plastic) you will end up with a clear depression in the material. I would like it to last a little longer before drying but in the hot Texas sun everything probably drys faster. After talking with the manufacturer they say that water can be used to wet the surface as long as you don’t dilute the polishing compound. This drill brush worked well https://www.amazon.com/gp/product/B003VIGPG6/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 Although these might work better as they don’t expose the polish to air as much and so it might last longer as liquid. I am polishing the inside of cylinders so needed something round instead of disk. For just headlights I would try these. https://www.amazon.com/Foam-Drill-Polishing-Inch-Buffing/dp/B076ZJMHB1/ref=sr_1_3?ie=UTF8&qid=1537911177&sr=8-3&keywords=foam+polishing+pad+for+drill