Bosch Self Priming Kit (Compatible with: EasyAquatak 110/120, UniversalAquatak 125/130/135, AdvancedAquatak 140/150/160, AQT 45-14X/33-10/33-11/35-12/37-13/40-13/42-13/45-14 X)

Works as intended, a bit pricey for what it is

Looks good not used it yet

Works great as long as you prime it properly first by filling it with water submerging it in a container of water, most issues I think why people say in the reviews that it doesn't work is probably for this reason, for me it works great and the only reason I did not give it five stars is that it's a little pricey and the length could of been longer otherwise a great piece of kit.

I bought this for my Bosch Aquatak 100 Pressure Washer so I could use a 25L water container as a water source for washing my car. I live in a rented property so wasn't able to use a hose pipe. Works great, just requires a little squeezing of the tube poking out the neck of the water bottle before the pressure reaches high enough to get a strong jet. Made washing my car very easy as it makes the pressure washer portable for moving it around different sides of my car. Slight leakage from the attachment into the pressure washer but not much, only a bit of dripping. Very happy with my purchase, fairly cheap accessory to get more use out of your pressure washer and make it portable. Probably use a lot less water for the whole job as well :)

Anyone thinking of using this kit with their AQT would be well advised to have a chat with the Bosch UK Garden Tools department, to find out how best it can be used. The AQT User Guide doesn't say, and the Kit's own bit of paper is equally unclear. For a start, chucking it into your water barrel won't work, as the filter nozzle and pipe will simply float on the surface! It has to be persuaded to fill with water before it will sink, but the best method is to connect to the tap which is, hopefully, at the bottom of a rainwater tank. That means a different connector on the hose (ie without a filter, so beware of debris in the source tank); or just use your garden hose with a rubber "squeeze" connector on the tank's tap. Either way, let the hose between tank and pump fill before turning on the pump. Water will eventually come out of the trigger-unit if the nozzle is left off, unless trying to run the hose uphill, of course. With the 3-in-1 nozzle on the AQT's lance, there is sufficient pressure to use either of the cleaning nozzles, but the third just sends out water with little pressure - could be useful for watering the garden, but that's about it, and best used in shortish bursts so as not to overheat the AQT pump.

Absolutely appalling. I bought this from Bosch as it’s supposed to plug to the EasyAquatak 120 as the hose wasn’t included with the main machine. But then turns out I need now to buy an adapter from the hose to connect to the easyaquatack as it didn’t come included with the hose?? What a way to scam money out of people.

Some reviews mention difficulty with priming. I used a large mop bucket and submerged the entire hose for 20 seconds. After that the pressure washer pump was able to build up sustainable pressure in about 30 seconds. I use the AdvancedAquatak 2000, a Canadian model. Fairly easy in my experience. Had a friend hold the intake up high while I got three more buckets of water and did not have to prime again. The hose is fairly flexible. This allowed me to leave a few extra coils in the bucket to keep the intake submerged near the bottom without danger of the whole thing popping back out while in use. Sure, you could build a similar assembly from parts for less, but I like the convenience and it works well.

Expensive for what it does but still valid to avoid priming the washer prior to start cleaning.

Funciona muy bien

parçaları alıp birleştirsen daha pahalı :) uğraşmaya değmez.

Bit costly, but easy and convenient to use along with Bosch pressure washer.

GRANDE QUALITA

Exactly what I needed for my pressure washer, I just wish it came with the washer rather than having to buy it separately but at least it's easily available