Furmax Electric Height Adjustable Standing Desk Large 40 x 24 Inches Sit Stand up Desk Home Office Computer Desk Memory Preset with T-Shaped Metal Bracket, White

Very well designed product: packaged quite well, very good assembly instructions, sturdy, hardware package with separate pack of extra parts

The desk arrived right on schedule and was packaged securely. I went with the black color and the finish looks clean and solid in person. It feels sturdy once fully assembled. Putting it together was pretty straightforward. The included tool is enough for most of the job. You’ll only really need a second person when flipping the table upright — everything else can be handled solo. The tabletop comes in two sections, but once assembled they sit almost perfectly flush. There’s barely any visible gap between them, and it looks seamless from normal viewing distance. The height adjustment is smooth and quiet, which I really appreciate. One small downside: the small wood screws that connect the two tabletop pieces (using the steel bracing plates) could be better quality. The heads can strip if you’re not careful. A few tips from my experience: 1. Make sure you’re using the correct size screwdriver so it fits snugly in the screw head — that’ll help prevent stripping. 2. Avoid using power tools unless you’re absolutely sure of the bit size. The included hand tool actually works well. 3. The bracing plate holes may look slightly misaligned with the pre-drilled holes. That seems intentional to help pull the two tabletop pieces tightly together. Tighten both screws gradually instead of fully tightening one at a time. 4. Pay close attention when installing the rotating shaft that connects the legs. Both legs need to be set to the exact same height before attaching it. Measure and adjust using the leveling screws at the bottom to make sure everything lines up properly. Overall, I’m happy with the purchase. For the price, it feels like a solid, good-looking desk that performs well.

Easy assembly. Works as advertised. Perfect no frills desk. Sturdy, metal legs. I have 2 monitors on it, keyboard, mouse, and still have extra space. I am 6'2" and the desk goes up high enough for me.

I enjoy this desk very thoroughly, I've had it for about 2 weeks, and it's done exactly what you'd expect a standing desk to do. Let me give the pros and cons: Pros: -It can go from its lowest setting to it's highest in about 20 seconds -The box came with zip tie/command strip thingies to attach any cords to the bottom of the desk so they don't just hang -It's very spacious and sturdy enough to support a 5'9, 210 lbs man leaning on it when in it's standing position -There is TONS of leg/foot room, and you could probably even store some small objects under the desk and still have uninhibited space -Height settings make it very easy to swap between heights with just the click of a button -Price is extremely affordable -Came with an extra piece for every single screw and bolt in case one went missing Cons: -This desk REALLY likes fingerprints, much like a Tesla Cybertruck, you cannot touch this thing without attaching a perfect fingerprint on the surface. However, it's very easy to clean off with a wet wipe so it doesn't really matter -I have had a small problem with the height settings where it would sometimes wipe the height that I set it to, and I'd have to reset it, but I didn't really read the instructions too closely, so maybe that's user error -The little screwdriver they provided is kinda bad, would recommend using an actual screwdriver when assembling Assembly time was about an hour and a half, but that was after I didn't read the instructions right and installed the desktop upside down (thankfully it was a super easy fix and didn't ruin anything) so if you're more vigilant than I, it should only take about an hour and 15 minutes realistically. All in all, it's an affordable minimalistic desk that has treated me well so far, I would recommend it.

I replaced my L-shaped desk with this desk, I think this was a good decision for work from home desk. The L-shaped desk was only 18" wide, not leaving enough space for keyboard after placing 32" monitor. Arrived on time, well packaged. Sturdy and good finish, I bought mushroom color. Very easy to assemble with one tool provided with the package. You need second person only to turn around the table, otherwise one person is enough. Top board is in two pieces but becomes quite flat hardly leaving any gap between the two pieces after assembly, see pictures. Very smooth and low-noise movement. The small wood screw heads' hardness can be improved, they tend to loose shape while tightening. These screws are used to tie the two top boards together via steel bracing plates. Some tips for assembly: 1. To avoid shearing of screw heads use the right size of the screw driver that fits well in screw heads. 2. Do not use power tools, better try with the tool provided with the package if you don't have the right screw driver. 3. The tie-in bracing plates' holes don't seem to match the pre-drilled holes in the boards, which is true. But I think this is kept purposely so that the two pieces press against each other well in the final assembly for a minimum gap. You need to work on each of the two screws progressively, do not tighten one screw fully. 4. Follow the assembly instructions specially while assembling the rotating shaft (that transmits motor torque to the other leg), which states to maintain the same height for both legs before assembling this shaft. Better you measure the height and adjust using the adjustment screws at the bottom of the legs. Overall this is a good value for money. In the past I have helped my two sons in assembling their tables, which were of course kind of custom made and much more expensive. For me this one is really a good desk.

it came next day of ordering and i Assembled it very easy with the manual everything is good quality and as described very good product

Incredible value - my first such desk and I love it. Of course, at this price some compromises had to be made... There's no cable management, and at full height the desk shakes quite a bit. There's only two memory slots (which is fine for me, but less than other tables). The desk moves up and down at a decent speed. It isn't too loud (I don't know how loud they should be but I'm not bothered by it). So far it works great - the quality of the top table is solid - it's made of a hard (engineered?) wood - won't scratch easily. I've accidentally brushed a knife edge against it and not scratched it yet.

Quality of product is good. Works perfectly. Support team reached out and explained before shipping that there is intentional cut on table top. They shared photos and videos over whatsApp. Took half an hour to assemble. Instructions booklet was easy to follow. Happy with purchase.

easy to set up and great for the price

Motor is working fine but table top wooden is already broken