JSP FORCE 8 Half Mask Respirator - Medium - No Filters Included - Compatible with PressToCheck™ P3, A2P3 & ABEK1 P3 Filters - For Dust, Silica, Fumes, Gases - DIY & Industrial - EN140

Been in construction for years and this is hands down the best FP3 mask I've used. Whether you're cutting stone, mixing grout, or dealing with silica dust — it blocks everything. What I love most is how easy it is to maintain. Every weekend I throw it in the washing machine, good as new. Once the filters are done, I just grab a replacement. Simple, reliable, worth every penny. Can't recommend it enough.

Replacement as my last perished. Great mask

I have tried several masks over the years but this is by far the best. There are 3 main reasons why this is a great mask. The all important seal against your face can be tested with the press to test filters. In my view this is absolutely critical and very reassuring. Secondly, the fit appears to be so good because of a small cut-out in the chin area. This small design feature gives a much better seal than anything I have tried before. Third it is easy to take apart and clean. As a former engineer I appreciate good design and this mask is brilliant and should save a lot of lung damage.

I originally bought this mask for 3D resin printing to deal with the toxic VOC gases it produces—and it works perfectly! It completely filtered out the VOCs, and I couldn’t smell a thing. I’ve also used it while cleaning with strong chemicals, and it gives me total peace of mind, knowing I’m protected from harmful fumes that could cause respiratory issues. The mask is incredibly comfortable to wear, even for long periods, and checking the seal is super easy—just press on the filters. Bonus points for how simple it is to replace the filters when needed. If you’re working with anything potentially harmful to your lungs, don’t think twice—go for this mask and prioritize your health!

This is a little too big to get a properly efficient seal around my mouth and nose. The SMALL size of this same item, however, is perfect (for me, at least). It comes in 3 different sizes (S, M, and L . . . Small, Medium, and Large). I didnt notice that at first until I'd bought and used about 4 or 5, of these over a couple of years!

Perfect for my use - Airbrushing. Used a cheaper version of another brand and total difference using this. More comfortable and adjustments arent a hassle, seems to create a good seal - and I have a beard! Easy to clean and store.

The best thing about this mask is that you can pull it apart and clean it thoroughly and it's completely adaptable - you can adjust it in such a way as to get a perfect fit for your individual face which is great. The filters are REALLY hard to get on and off - which is my only complaint. I'm scared that I will break the mask itself holding onto it tight enough to get the filters on and off!

Well it's a pandemic. I got this along with some goggles because I experienced the insanity of SARS in Beijing in the 2000s and decided I was taking absolutely no chances this time out. I have elderly relatives and It's just me so I've got to stay healthy myself incase I need to care for them at some point during all this. For the correct level of protection against COVID-19 you're going to want to use P3 filters. It'll protect you from the virus when it is aerosolized and attached to dust or water droplets hanging around in the environment. Remember there is no such thing as 100% so avoid all but the most necessary of contact. If used correctly with a good fit and airtight seal it'll see you well. It's very important to remember that once you have a good fit not to keep touching your mask as that's where the contaminants likely will be. When you get back be sure to take extreme care in the process of removing an decontaminating it after use. This can be achieved with disinfectant solution. I would also highly recommend if this is the route you're going down to get some goggles and gloves too. If you're going to do it, do it properly. I won't give a guide on putting it on as a written account won't do it justice. Google the product and go to the manufacturers fit guides youtube. I highly recommend doing this as there is a process for it and it's vital you see it and get it right. As a final note, stay the hell inside.

Pues eso, que sé si funcionará bien o no, pero le pongo 2 estrellas porque viene sin los filtros, y el producto se muestra en la tienda con los filtros. Hay que comprarlos aparte.

Oggetto non conforme all'immagine. filtri non inclusi Andava specificato nella descrizione questi ultimi devono venire acquistati a parte per altri 20 Euro

ce produit correspond parfaitement a mes attentes . il est techniquement parfait . Il est néanmoins dommage qu'il ne soit pas livré avec un sac ou une boite de rangement .

Je vois la photo produit et Me dis ok, le masque à l'air plutôt bien... Mais cette photo représente le masque complet.. Mais pas ce que j'ai reçu...cad le support caoutchouc sans les supports des filtres ni les filtres.. Résultat.. Coût aux alentours des 60€…!!! Moi j'appelle ça de l'arnaque même du la qualité y est.. Manquerait plus que ça!