2.0M LED TV Backlight USB Bias Lighting with 16 Colors and 4 Dynamic Mode for 40 to 60 Inch HDTV,PC Monitor,Led Light Strip.(4pcs x 0.5m Led Strips)

Still going strong years on. Great quality. Easy to use. Comes with a remote control but nice setting it on rotating colours. Does not reflect what is on the TV just random colours.

Easily applied to back of TV , brightens up the back of the TV , different colours modes to chose from and was an amazing price .

These lights are easy to install, they stuck onto my 55" tele really well & they are nice and bright. The only fault is that 1 of the 4 strips does not work in the same way as the other 3 and when I set them to Green, that 1 strip glows Red. Apart from that, all other colours work well. These lights are good value for money and it's very handy having the remote rather than downloading an app to my phone.

Arrived in 24 hours with prime. Packaged well and small enough to fit through a letterbox if you're out. For others information initially the four LED strips are joined together in one roll but they seperate easily. I started by plugging in the USB cable to the TV which has an AC/DC cable at the other end then attached the main LED strip which is where the AC/DC pin attaches into then placed the final three LED strips around the TV. For informative purposes my TV is 49" and the LED strips were adequate size wise. I cannot confirm for other sizes perhaps other reviews can help with that. Strips are nice and thin on a white backing strip. Adhesion so far seems fine. However from past experience the heating up of the rear of the TV can cause the adhesive to become less effective but for now, day one no issues. LED's are nice and bright absolutely no complaints there. The glow coming from them reflected on the wall behind is very soothing and not overwhelming. The remote is nice one of the nicer ones I have and I have quite a collection gathering now. It's very responsive and works well. None of the available functions aren't working or responding. It should be noted that brightness control only works when you have picked one static colour and it works well. Brightness cannot be increased or decreased when on smooth, fade, strobe or flash unfortunately. This is a far better set than the previous set I bought which developed not one but two faults eights months into use and are now fit for the bin as neither the seller or Amazon are willing to enforce the one year guarantee offered with them and this is why I purchased this set. I wish I'd purchased these in the first place everything about them is much better. I appreciate it's just day one but I'm happy and hopeful. I certainly give my seal of approval and I'm a very fussy consumer.

I looked at several of these on Amazon. This one was much cheaper than some but thought I would have a punt and get this. Arrived next day on Prime and installed the same day. It comes with a dinky remote with lots of coloured buttons, all of which are easily read and understood. You can change the colours with the remote quite easily. You have to position part of it just slightly hanging out from under the TV to get a good signal for the remote. Colours are remembered when you switch the TV back on. I bought the 2 metre one for a 47 inch TV and it's a perfect fit, top and sides. You would need a longer one if you want to do the bottom too. I thought my wife woud think it was tacky but she says it does seem to make a difference. On my TV which is a bout 10 years old it has a visible bezzle so the only downside is that it makes the bezel stand out more. I love this kit, it seems good quality, comes with connectors for going round corners and lots of sticky pads to stick it all onto the TV. All in all, I've given it 5 stars which is rare for me. I can't find any fault with it. A great purchase. Fitted to the TV in literally 5 minutes. I first thought that it didn't switch off when you switch the TV off so I used the remote to switch it off but later realised that it obviously uses up the residual power in it for about 30 seconds after turning the TV off, and then switches off.

Where to start? I don't know. It seems okay? I think the title is misleading. I thought the USB was 2 metres long, not the lights. There's too much stuff in the box. It's almost overwhelming. For some reason the English instructions are German (Didn't need them, just wanted to check just in case I was gonna screw it up). When I was pealing the sticker off the adhesive, it pealed off the print, not the sticker, the thing that preserves the adhesive sticky anyway. So as a result, it took a long time to separate the adhesive from the sticker. I gave up on one of the strips because it just wasn't coming off. The adhesive is strong, but too strong perhaps. Because you can't bloody peel it off. It makes it almost pointless. You're better off using sellotape. When it sticks, it sticks. There is a slight problem with making a turn where you have to awkwardly bend the connectors (That are provided in another packet in the box). The LED's themselves are nice and bright. I did however get two because I was unsure I'd have enough. Turns out, it is enough. Something that also came as a surprised to me, is the fact they both turn on with the same remote. Though the outputs are close together which might explain it. The USB cable is roughly 40 cm, not very long at all, so you may need an input to output USB cable depending on what TV/Monitor you have. Note: The strips may be too big for a computer monitor.

I love this product. It works perfectly, power being supplied from the USB on the rear of the TV. Comes on with the TV and goes off with it if you leave it on via the remote. Colours are great but depending on your wall colour will depend which you choose. I tend to pick one and leave it alone. Take some time to get it fitted equally over the back and sides. If you don't, the light will produce patches and not look great. Two things with regards to the remote sensor. Firstly, placing it so it's not under tension with the power cable is required. Just get it so it naturally sits flat on the rear of the TV. If not, the adhesive let's go after a few hours on this part, the rest remains fine though. If you set it so it sits flat, it stays stuck. Secondly, you don't have to have the sensor showing below the TV. I tested this before I fitted it. I thought it would look naff with that showing but I need not have worried, it works fine with the remote. The colour is not adaptive. You set a colour and it says that colour. It does not change with the TV picture like some standard features of some TVs. I know it may be obvious but just to confirm that.

Really impressed with these LED strip lights! Out the box they look abit cheap (for the price though what do you expect) however once fitted and working they are brilliant. Word of advice on fitting, don’t struggle trying to stick these to the back of your TV without moving the TV first. I unplugged everything and turn the TV around first so I could properly see what I was looking at. Another helpful tip is use some masking tape and cut some lengths 50cm long and plan out where your strips will fit and go before sticking them down. They are a bitch to unstick and wreck the sticky pads on the back. I found many bumps and lumps in the back of my TV that changed my plans on where I ended up fitting them. The LIght strips themselves can only be fitted in straight lines vertical or horizontal, any curling around bends are done with the flexible joining strips that are provided in the box (3 in total). The sticky back plastic is 3M tape so surprisingly decent. The remote works well although looks cheap and nasty. Check my photos to see the output and layout I eventually settled on, this is a 49” TV and I wasn’t able to fit them around the perimeter of the screen with just one box of these to give an even glow of light. Probably could be done with two boxes. The best thing being powered via the USB port on the TV, is they turn on and off with your TV remote and it also remembers the colour setting and brightness so if you are happy with one colour you can set it and put the LED light remote in the draw out of sight.