GI Replacement Brass Ceramic Disc Tap Valve Insert Gland Cartridge Quarter Turn Seawhisper

There is a warning just below the description on the item that they are a frequently returned item. Careful measurement is required to make sure they will fit. Luckily, I have a vernier gauge that allowed me to get the exact measurements of the old fittings. Thankfully, the measurements were correct and these fit like a glove. My old taps could not be fully turned off and these solve that problem. The is very little travel when turning but they work as expected. Would recommend.

Good quality material fast delivery good affordable price

I replaced my cold tap, reassembled everything and only then discovered that the cold one of this pair is anti-clockwise and I needed clockwise. Fine, I took everything apart again and used the hot one from this pair instead - which is clockwise-opening. I wish I had checked first rather than assuming that cold always equals clockwise. Other than that, these did the job. No more drips from the cold tap.

These were a perfect fit for my swan necked kitchen tap. I had changed valves previously so wss familiar with the process. Condiderable saving by doing it yourself compared with paying for a plumber. Very happy eith the finished job.

Installed on my taps, worked as expected

It has fewer splines on the top bit than Franke taps. I should have checked, but assumed, as it was second on the search results, it would be standard ☹️

The valve fitted well with no leaks and the splines matched the handle. However, the supplied screws were too short, so the old corroded screws had to be used again. Otherwise, a good quality valve.

After isolating the water supply, l removed the old valve, smeared a touch of silicone grease on the threads of the new valve and screwed it in and tightened it up. (Before I undid the old valve, I did make a wooden template with cutouts to hold onto the tap spouts to stop them moving when using the wrench to undo and refit the valves)

Acheté pour remplacer les têtes d'un robinet Squash de Jacob Delafon vieux de 30 ans (chrome toujours en parfait état). Les têtes se montent facilement et s'ouvrent dans le bon sens : les 2 vers l'arrière. Les croisillons se montent bien mais l'extrémité crantée de ces têtes est plus courte et l'épaulement plus long que sur celles d'origine. Résultat, les croisillons sont un peu écartés (3-4 mm) du corps du robinet. C'est plus esthétique que fonctionnel. À l'usage, après quelques mois, les robinets restent bien doux à l’ouverture et ne produisent pas de bruit d'écoulement.

Perfect replacement, works like new.

Pas de problème pour le montage

j'ai reçu ces 2 têtes de robinet, le lendemain de la commande. Je les ai installés de suite et ils vont parfaitement sur les robinets de ma cuisine. Je recommande ces produits.

acheté pour remplacementsur robinetterie de cuisine montage sans probleme usinage tres correct a voir sure le long terme sinon fait tres bien le job