LK 2 Pack for Google Pixel 7 Pro Screen Protector 6.7-inch + 2 Pack Lens Protector with Positioning Tool, Self-Healing TPU Film, Touch Sensitive, HD Ultra-Thin

Update (6 / 5 / 2020): So I just got a new set of this kit again as since I had cracked my last screen and needed to replace it. Just put on a new screen from the brand new kit and it went on almost flawlessly save for just 2 pieces of dust that managed to get just on the edge that I worked to lift and remove but I had absolutely no issues with getting the bubbles comletely out, so I bumped it up to 5-star. I will note they seemed to have adjusted the frame and made it bulkier than the last one I had. I did have the glass screen try to lift a little bit when taking off the new frame because of it but it did not impact the overall application of the screen, I think the smaller frame they used to have was better. ------------------------------- Original Review: This is for the Pixel 3 kit. The first thing I'd like to mention is the frame is brilliant. I've never seen this in any other screen protector set I've used in the past and it truly is way better and easier than using the guide stickers. The frame made a nice perfect fit over the phone and it was extremely easy to lightly drop the glass screen down perfectly centered. The rest of the kit: guide stickers, glass, wet/dry cloths, micro-fiber cloth; were all pretty standard issue and worked as expected. The only reason I gave this a 4 star and not a 5 is one small corner of the glass I cannot seem to get a bubble out of and needed to use a second glass after pulling up and dropping the first one several times. The first one was pretty noticeable and couldn't get it out to well. The second one is way less noticeable but still right in the bottom left corner of the glass just on the top side of the curve. Both were in similar areas on the bottom of the phone (first was around the mic). Not sure what it is about that area but overall, I am quite happy with the result.

I read many reviews complaining about this product, but purchased it anyway and did not have the same issues as reported... so I took copious amounts of pictures hoping to help future purchasers. Here are my rebuttals: #1 The guide breaks the screen protector because each are different sizes. I did not have this problem at all. In fact, all three screen protectors were nested inside the guide in the box when I received them. I was able to freely (but tightly, which is the purpose of a guide) move the protectors through the window of the guide without any issue. Included is a photo of me holding a protector inside the guide, with the "peel me" label still attached, and on the outside of the guide. You will also notice that there is a little room between the screen protector and the guide. #2 The protector doesn't go all the way to the edges, and/or bubbles. The Pixel 3's screen is beveled, which means, unless you search for a beveled tempered glass screen protector, you're not going to get a screen protector that goes to the edges at this price point, period. I personally don't carry a phone without a case, so of course I want a screen protector that doesn't rub up against the edges of the case, which would cause the case to dislodge the screen protector, or induce bubbling under the protector. The screen protector fully covers the LIT screen width-wise and length-wise. The width of the protector is tighter inside my case, but shorter length-wise, by about 0.25" on both top and bottom. Also, I have zero bubbles under my protector after my first installation, after following the installation video. See photos. #3 The holes for the front-facing cameras interfere with wide-angle selfies, creating a vignette. I used the guide to install the screen protector, and have no issues with vignettes using the wide-angle selfie function. See photo, but don't judge the messy hair. #4 The adhesive of this screen protector/this screen protector causes a rainbow halo effect on my phone's screen. No issues here, see photos. My protector is crystal clear. #5 This screen protector causes lost functionality of my phone's touch screen. I have zero loss of touch screen capability. Absolutely zero. Now to the good stuff: My ONLY ACTUAL PROBLEM with this product is... one of the screen protectors has a tiny, minuscule chip on the surface of the edge near the bottom left corner (see photo). The good news is, it's over the blacked out part of my screen, so it literally does not cause a problem with the touch screen at all. The bad news is, the integrity of this particular screen protector is now compromised. But $10 for 2 non-chipped and 1 chipped screen protector, I think I can live with the chipped one until it starts cracking. Hope my long-winded and photo-riddled review helps at least one of you reading this! Cheers.

I managed to apply this protector perfectly first try. I previous had two $55 protectors that didn't work out. The expensive one wouldn't sit right and had massive amounts of bubbles I couldn't remove and the sides didn't sit well. I wasted $110 on nice expensive protectors. I bought these cause I've used the brand multiple times for iPads, Kindles, Switch, 3DS, PS Vita, Pixel 3a XL, Samsung S5 and S7. I never had one go on badly and always a perfect fit. They saved my devices multiple times over and I still have yet to bother replacing them they clean up and look new. Zero bubbles from this brand using my extra steps to ensure no dust as much as possible. I say I'm not a huge fan of TPU I'd rather have glass. I had one small fabric piece land just inside an edge. I picked at it and the TPU tore leaving a very small tear on an edge. I'm not to concerned about it since it was the only spot but I know the screen won't try to lift up due to the tiny air pocket. Best part if it does I have an extra so least I can do it a again and for less than a 5th the price of expensive protectors. I bought two packs just encase so I have 3 left. This has to be the best and easiest application method so far. I might have bent it too much but I got the lines out and they don't show up when it's on. You only see them when it's off and shining light at the perfect angle. Also I can just pull it off and try again later. If anyone has trouble with bubbles and dust I highly suggest this method: 1) Turn your shower on for a bit to humidify the bathroom. This will draw the dust down and less will float in the air. 2) Keep door closed and shower running while you do the assembly on a flat surface to keep it humid and mirrors fogged up. I just use an old mouse pad over my closed toliet seat. If you have counter space the better. I have not had an issue with dust or bubbles doing the above. Just work over a clean flat surface. I've placed towels over my sink and laid a book on top that to make a flat dry surface as well.

Very nice kit for my Google Pixel 7 pro. I am amazed at how easy they made it to install. The kit comes with a jig that basically aligns the screen protector for you. All you have to do is peel and squeegee. This covers the curves edges perfectly! The screen protector was completely on there within a few minutes!!! The edges and corners did not peel like others I've tried. The screen protector actually covers the entire screen. The quality of the protector is excellent! It is crystal clear and I do not have any issues with the fingerprint reader. Also, it seems as though this screen protector tends to stay cleaner than the previous screen protector I had on this phone. It feels very smooth. This kit also came with the small camera lens protectors. These for sure you have to use your eyes and hands to properly align with the camera itself, but it wasn't that difficult. The kit came with two screen protectors, two camera lens protectors, two alcohol prep pads, too sticky lint cleaners, one lint free cloth, and the plastic jig that aligns the screen protector for you. I am overall very happy, and I highly recommend this product.

I bought my Pixel 3 the day it came out.. ever since then I have been on the search for the perfect glass screen protector. I tried a few, all failed miserably, either too small it didn't cover the screen the whole way, or too big it left the edges popping up some as you could see it not sticking to the slight curve of the glass, or massive installation problems (stay away from anything that wants you to put any kind of liquid glue on your phone!!!). I ended up settling for a plastic sticker type protector, lets just say it sucked but was better then nothing as well. I finally found this one and it looked like a winner.. I took a chance, price was great at less then 10 bucks, and you get three of them!! The plastic mounting bracket it came with worked great to line up the screen protector, came with everything needed to clean the screen as well. Although I always recommend using compressed air as well to blow off dust as well as the little stickers it comes with. The fit is pretty much perfect, if it were any smaller you would see part of the screen past the protector, and if it were any bigger the edges wouldn't stick to the sides. It went on great, just a couple bubbles I was able to push out with the enclosed squeegee type board that it came with. A note on the install, they actually went the extra mile and put a soft but firm covering on one side so it wouldn't scratch the screen at all, very thoughtful!! The only thing I found odd was the install video they pointed me to that was printed inside the box showed a different way of installing it without using enclosed mounting frame/bracket thing. I had actually done some that way before and it works, but I found the mounting frame/bracket even easier :) I highly recommend this for anyone looking for the perfect glass screen protector! It's about time someone got it right!

I had used another brand for my old phone, but the guide frame with this product looked like a good idea so I purchased this for my Pixel 3. The frame works nicely, but the screen protectors themselves proved disappointing. With the nice guide video, installing the first went fairly smoothly, however when I was following the steps to press out the bubbles along the edges the thing failed. A bubble near the edge simply cracked the screen protector! The edge looked like when a flying rock takes a chunk out of your windshield, and I could feel the divot easily. "Well thank goodness it's a three-pack," I thought, and peeled off the protector. The chip in the corner expanded into a crack all the way close to the top-center of the protector. I worry that, if light pressure from my thumb cracks the thing, it won't do much to protect my phone in an accident. Apparently, once one of these things has touched your screen it becomes a dirt magnet. I had to clean off far more flecks of ground glass from the break than seemed possible - it was like sand appeared from nowhere on my phone - and start the process anew. Despite using the wipes again, and the stickers again, installing the second was much much harder than the first. Dust flew in from all four corners of the room to the screen, giving me fractions of a second to place the protector after cleaning it or getting dust trapped. Despite my best efforts, some dust made it under one corner, and I had to pry that corner up and get the dust out with the sticker. Points for including those, at least. I then followed the instructions to get bubbles out by pulling up corners and squeegeeing the bubbles away. This resulted in one of the corners now looking permanently bent upward. I pressed down with my thumb as instructed (working another failure like the first one, but at least that didn't happen), but it won't stay down. Given the disappointing results thus far, I have not removed this example and tried the third. I'm going to try and live with it for awhile. But the bottom line is: this is not a product that looks incredibly good nor does it inspire confidence in its durability.

By FARRRR the best screen productor I have purchased with GREAT instruction and installation kit so it is EVEN all around. Buy it you won't be disappointed.

This is my first review - but finding good quality phone accessories can be a giant pain in the butt so I want to help others. I just applied my second of the three screen protectors. I drop my phone! Kind of a lot! I have a kid, and she also drops my phone a lot. The first screen protector lasted about 8 months, which in itself was impressive. When I noticed the first crack in the screen protector it was almost unnoticeable. A few weeks later, I drop it again, and there is, again, a tiny tiny crack. And they didn't get much worse! As time goes on, I collected a handful more cracks, but none of them got much worse. Last week I had a drop that finally did the protector in - a shatter at the top left corner. I take it off and BOOM - a clean, crack-free surface. Amazing. THANKFULLY me from the past isn't a big dummy - this three pack was a smart move. I put the second screen protector on today. They come in a sturdy box so nothing was broken even though it's been stored in a pretty high traffic clutter-hutch hellscape area. It went on very easily. It fits perfectly. No bubbles, nothing. I didn't use any of the guide stickers that the recommend because this isn't my first rodeo, but they are provided if you need them. They include three wet and dry cloths to make sure you are applying to a completely clean screen, which I appreciate. Bottom line: I am a mess. This screen protector helps me feel like less of a mess. It's a set of good quality screen protector. A+ will purchase again.

They work as intended there is no issues installation pretty straightforward the kit is actually really good it comes with a little plastic tab that slides or slots into your USB C charge port and keeps everything aligned.

Ich bin mit der Hülle sowie den Schutzfolien für Display und Kamera sehr zufrieden. Das Anbringen der Displayschutzfolie ging ging mit dem beiliegenden Rahmen absolut Präzise und Problemlos. Nur am Anfang auf den Lautsprecher achten, da ist eine kleine Kerbe zur Orientierung. Es sei aber auch gesagt, dass es jetzt nicht die erste Schutzfolie ist. die ich installiere, insofern habe ich auch etwas Erfahrung. Ebenso einfach war die Installation der Kamerafolie, die auch noch gut aussieht. Die Hülle macht das Smartphone natürlich nochmal größer, aber dass sollte für jemand der sich dieses Handy kauft eine untergeordnete Rolle spielen. Sie sieht wertig aus und liegt gut in der Hand. Auch sehr schön: Es liegen eine zweite Schutzfolie für Display und Kamera bei.

وصول سريع .. منتج ممتاز وتركيب سهل الحمدلله

This phone protection kit for IPhone 13 Pro is AMAZING! Great value for money! Looks so good and stylish on my phone. The package is also so so stylish and the tools for screen protective glass application are so handy, precise and easy to use. Cute stickers and a warranty have been also included. Thank you so much for such a GREAT kit!❤️

Read the instructions 2x. Had no problems putting it on the phone. Hugs the sides VERY well. Zero air bubbles. On a very rare occasion, one might appear (not sure why), but it is easy to press out. This is NOT hard plastic. It is soft, but rebounds with not traces when there is point pressure on any spot. The screen still looks (deep) black with this in place (as if nothing was on the screen). Finger print marks are minimal. I do NOT use the finger printer reader, so I cannot say if it works well with that. But overall screen responsiveness is excellent. I do not notice any degradation.