RJ45 Crimp Tool Pass Through Kit Ethernet Crimper Cat5 Cat5e Cat6 Crimping Tool for RJ11/RJ12 6P/8P with Network Lan Cable Tester, 50PCS Cat6 Connectors, 50PCS Boots, Mini Cable Stripper

Works as described! Easy to use and comes with everything you need!

This tool works as described and has all of what you need. I couldn't be happier.

Worked on first try. It comes with everything you need. Its important to know the wires are extremely delicate so be gentle and get the wires in correct position. Cut them short before sliding them into the connector. Simple and easier than trying to find someone to come do one small job.

I bought this kit to convert my Cat 5e phone lines into ethernet. I figured that I would put RJ45 passthrough connectors on each end and forgo keystone jacks. Well, I learned that was not a good idea after purchasing this toolkit. Overall, this toolkit is a great value for MOST of the items. The connectors and covers are good quality, the tester works as expected, the wire cutter is sharp, and the stripper/punchdown is the MVP of the group. The real loser is the crimper itself, which is why most people buy this kit to begin with. It looks like every other crimper sold on Amazon, but doesn't function correctly (as least mine doesn't). The stripper part on the tool is I'm guessing for Cat 6 cables as it too big for my Cat 5e. The cutter on it works, but the pliers given work better. The crimp part is where this thing falls flat. It seems to work just fine until you actually test out your ethernet cables. The connectors either don't pass data fully or they do and then they don't. I tested this over and over and came to the conclusion that the crimp tool is not crimping uniformly across the connector when pushed down. The gold contacts have markings afterwards where the brown wire connector is more scarred than the orange/white at the beginning. This tells me it is pushing down more on the one end than the other. It seemed that the #8 wire was always randomly working/not working on the tester. I would sometimes get 1Gbps, 100Mpbs, and sometimes it would keep disconnecting. I know it must be the crimp tool as I converted one end to a keystone jack and I immediately saw improvement. I bought a patch panel to use in my media cabinet for the other ends and voila my cable problems are over. Yes, I had the wires in the connectors correctly and everything. This tool just does not crimp the connections correctly with even pressure across the connector (even if it look perfect afterwards). I'm not sure if the gold contacts are being marked too much or not pushed down enough. If you are buying this for the crimp tool, then you may get a faulty one like I did. The other items seems to work great and are worth the package alone (especially the cheap yellow stripper / punchdown tool). I ended up keeping this kit for the other items, but will trash the crimp tool itself. Of course if you want to return one item, you have to return the entire kit and risk getting something else broken. Take your chances on this kit, but don't expect everything to work.

it works the way i wnat but no battery,s waas with it and the rj did not work with my cat cabol but it works the way it should 10/10

First time doing Ethernet cables; no prior experience or training here. It was easy. Tips for first timers: 1. The end pieces it comes with are "push through", which means you're supposed to push the arranged wires through the clear clips a bit so you can easily see they went through in the right order. The crimping tool cut the wires perfectly flush. I tried to make them perfectly flush before crimping; don't waste your time: the tool does it right. 2. The direction the clip faces matters. I did mine all backwards first. Do one, test it and make sure it works, then do the others. It comes with a bunch of end things (don't know what they're called, tips, clips, wire protector rubber bits) so if you mess up, it's not problem, you've got plenty. It came with way more than I realized. I tossed it in my "box of random wires" and I'm pretty sure it will last a lifetime. Doesn't feel cheap or flimsy at all to me.

Things seemed great at first; I used this to terminate 4 different drops. Everything tested great, yet I had a lot of unexplained issues; when plugged into junctions and wall plates I would sometimes get tests saying the first pair failed continuity, despite the junction and cable itself testing fine. After wiring everything up, I couldn't establish a connection; my router and computer never were able to negotiate speeds. I was seriously at my wit's end and spend many hours debugging every single inch of cable in the runs. After reading some reviews here with similar stories of the first pair not getting crimped properly I threw in the towel and bought a Klein crimper, tester, and connectors and redid all of my work. It all works properly now, on the first try. It doesn't make sense to me how it was possible for this crimper to make cables that pass continuity checks (even with the Klein tester!) yet fail to pass data. Long story short: don't waste your time. I'll never get all of those hours back, and it was worth it to spend a little bit more to get the job done right the first time.

Kit works great as long as you follow the instructions. It is easy to screw up and make a mistake, but the kid comes with a tester to test your wiring after you have completed the circuit and then you just have to try again if you miss wired your connector best to test a new cable and compare it to the one you made repairs on.

Super

La pinza è più compatta rispetto alla tradizionale. Funziona. Batteria del tester non inclusa.

ليس كما في الصور نهائيًا

Purchased as a gift

Also ich kann nicht meckern macht was es soll 👍