TFC-GSFP

Easy to install and function as described. Plug and play. Good quality of casing.

We used this converter to replace an old switch that was dying that had a fiber card in it. We were using a 10/100 HP ProCurve Switch 4000m. After swapping the switch with this device, the traffic restored seamlessly without any need for resetting any other devices. We had some concerns because of some of the other comments, so we did a few tests to the device to see how it effected the converter. We ran a continues ping and unplugged our switch, plugged it back in and connection was restored. We also unplugged the fiber cables to break the connection, and after plugging them back in the connection was restored. Finally, we unplugged the converter, and after plugging it back in, again, the connection was immediately restored. We also ran a ping overnight to test for any dropped packets, none were reported. In conclusion, this seems to be a very good and reliable product, and the price is really good compared to other options out there.

Straight out of the box, installed it on the wall next to the router plugged it in and it worked like a charm. the only down side is that it requires a few minutes before data actually begins to be transmitted over the fiber cable.

I was very impressed with the deliveries time.And this product save my project that I was currently working on.

Fiber optics have always felt like something from some distant future, but the reality is this stuff is cheap and can run over huge distances. We use these devices at a couple of warehouses to extend a network from one end of the building to the other. These boxes are cheap and flawless. Plug it in, hook up the fiber cables (just choose the right connector based on your installation), and plug it in. Connect the ethernet to a switch or hub and you're connected. Simple as that. Almost feels too easy. Keep in mind that you need a pair to make this work. Each end needs its own box. These are maxed out at 100 megabits. If you need faster speeds your cabling might work but you'll need a faster connection device.

Using this and the companion TrendNet TEG S51SFP, the digital end of my stereo is cleaner sounding. All together as far as the world of audio goes amongst the least costly way to tweak one's system. Basic Set-Up: Router > TEG S51SEP (via CAT6)> TFC GSFP/A via fiber > DAC endpoint via ethernet. You can also use two of these devices if you do not need extra ethernet ports.

I use them to test my Fiber runs to make sure the connectors work! A Cheap way to make sure it's all put together right!

I'm using these as media converters for a new fiber installation while I wait for delivery of the switches that will eventually assume their role. These media converters are simple, reliable and transparent, just as they should be. Currently, I have six of them in use and they're the only components in my ramshackle network (non-profit) that doesn't give me headaches.

Wir haben diesen Medienkonverter als Ersatz für einen defekten Konverter an einem Sirona OPG Gerät verwendet. Klappt problemlos - dank der raschen Lieferung war das Geräteausfall nur kurz.

Replaced a proprietary media converter for a Sirona panoramic xray machine and it works brilliantly… much more reliable than the original - overpriced - nonsense they force you to buy.

Funktioniert perfekt bei meinem Orthophos XG als Ersatz für den defekten Media Converter

LLegoa tiempo, recomiendo el producto

Dieses Gerät läuft bei uns in der Firma seit einem halben Jahr im Dauerbetrieb ohne Probleme. Das Gerät wird etwa "handwarm" dabei. Den Stromverbrauch haben wir nicht gemessen ist aber neben den anderen Geräten sowieso unrelevant. Die Installation war in unserem Fall einfach: Gerät einstecken, Glasfaser einstecken und mit dem Server verbinden. Fertig. Kurz: Gerät funktioniert im Dauerbetrieb ohne Probleme. 5 Sterne.