Art3d Drop Ceiling Tiles, 24x48in. White (12-Pack), Polyvinyl Chloride (PVC), Glue Down

SO simple to install. All you need is a large pair of scissors that are sharp and cutting is easy. Ignore reviews that complain about difficulty. I'm a DIYer and these panels are amazing for use as a wainscotting. I secured mine by framing with MDF planks and a brad nailer. Once the planks were cut, the assembly took minutes. Measure and plan ahead to see if these will work for your project. Precalculate how you will solve any special cuts or fittings. I didn't paint them to keep as maintenance free as possible, instead I color matched with Behr paint. I highly recommend these panels. They will instantly add a high-end elegance to your room. EASY to cut and install!!!!

Bought over 20 packs of these and not a single panel arrived damaged as mentioned in some of the other reviews. These are easy to install and very easy to cut, we used normal scissors. The whole room looks so much better and elegant than before. I’ve bought other products from this company that have also been very reliable.

We replaced our entire basement ceiling and ordered 7 packages containing 12 tiles. We used the existing grids. The product looks far more expensive than it cost and only 2 pieces were cracked in the entire shipment of 84. Installation was ok and went fairly fast (lots of trimming, but the product is lightweight so scissors can be used), The finishing work takes much longer. We needed to reinforce the tiles that were behind the larger lights and heating ducts for support because the product is so lightweight and flimsy. And there were many unsightly gaps created where the tiles meet the walls stairway, windows, detectors, etc. Again the lightness of the product means they don't always lie flat. Overall we don't regret the choice because the cost was low and final look is beautiful. Plus they are water and mold resistant.

Not using as drop in tiles but they are nice. Size is as stated. They are a thin flimsy pvc which is appropriate for a drop in. We are using as decor on our garage walls and they look nice making the garage gym have a nicer feel to it. They clean up nice and make the garage brighter.

These Art3d PVC Ceiling Tiles completely transformed my space! The 2'x2' panels are lightweight, easy to cut, and simple to install. The white finish looks clean and elegant, and the material is durable and easy to wipe down. I used them to create a statement wall in my bedroom of a new build home, and the difference is amazing. Great quality and value for a 12-pack — highly recommend!

This is a horrible product. I bought 31 cases for a ceiling job. Every box was damaged except two. The corners are cracked. I then called Art3d and left a message. I received a return call at 2 or 3 in the morning. The person left a message stating that Amazon was responsible. The next morning after 4 chat rooms I finally got someone on the phone from Amazon. The Amazon representative says they could pick up the damaged boxes, but there wasn’t an option to bring new ones. Needless to say, the job was not completed. Do not buy. Neither Amazon nor Art3d will be helpful if there is product damage.

I used this on a wall, instead of Bead Board. It's Beautiful looking, but hard to cut & glue. Pros: * Looks gorgeous. * Light weight means easy to move around. * Covers a ton of wall space quick & easy. * I painted over the edges only, & the color match to my bathroom white woodwork paint was perfect. * Hides a TON of flaws, if your walls aren't perfect. (Sand down the bumps first, though). * Flexible for easier positioning in hard to fit areas. * Scratch resistant. Despite trying to cut it with a Razo knife, it skidded right off, & no marks showed after. * Nothing sticks to it. I calked around it, getting some calk, & later paint on it. Both just scraped right off once dry. * Super washable. PVC is unlikely to hold anything on it, & a quick wipe should get rid of any dirt or spills. Cons: * Very hard to cut. Exacto Knife skidded right off it. Household shears were unmanageable. I had to go to Tin Snips, which cut through easily, but only 1 inch at a snip, & it left a bumpy & ragged edge. * Those Sharp, Ragged edges are a cutting / snagging issue for hands & clothing, & look awful. * It's hollow, so if you end on a half panel, you're gonna have to deal with big holes at the ends of the ridges. (I filled mine with calk, then painted, but it's not a great looking finish.) * Very hard to secure to a wall with calking/glue. It holds it in place - if you have a baseboard to tuck it into, but without the boards at the top & bottom like I used, I doubt it would still be on the wall. When I push on it, I can hear the calk moving behind it. (Also, the calk/glue just rolled off it with my finger, when I was doing cleanup, so it's not really stuck on the PVC - front or back.) * I think you might be able to tack it down with brad nails, but I doubt you'd like the look of it. I wasn't willing to risk it, once I realized the paint just rolled off with my finger in cleanup. I suspect it would leave divots, too, so I would not plan on using nails, unless you intend to cover them with wood to hide them. * Manufacturer says they can be painted, or glued, but neglect to mention what Glue or Paint will stick to it. My experience with it says glue and Paint Do not stick to it. Both just rolled right off with my fingers in cleanup - After drying. Will the paint stick, sure. Will it stay there if you bump it - I highly doubt it. Tips: * Use a baseboard & top rail, to hold them onto the wall, & calk/glue just to seal it to the wall. * Use a plastic putty knife to clean excess calk or paint off edges. (Or a Credit card, too.) * Someone else suggested using a hair dryer to soften it, & THAT was a Great Tip! It not only made it softer to cut, but also aided in smoothing out some of the ragged & bumpy edges from cuts. I used a metal Putty knife to smooth it, while using the hair dryer to soften it. Not a perfect edge, but way better than the mess I started with. Overall: This was a good solution to my small bathroom's wall imperfections, & I'm happy to have found it. That said, it was a pain to install, & I would not use it on a high traffic area wall, unless I had boards going all around it on all 4 sides. There's no running or roughhousing going on in my tiny bathroom, so no danger of people bumping it.

they look awesome on my kitchen ceiling. easy to clean, simple to put up. thanks!

Pedí 3 paquetes y todos vienen rotos.

L'effetto è soddisfacente, ma le piastrelle sono troppo sottili, il montaggio non è facilissimo. alcune non combaciano perfettamente, ho dovuto rifinirle con bordi in legno e altri accessori per abbellirle e coprire i difetti di fabbricazione

Super très beau

Nice tiles when there stuck on ceiling,there were a few problems with the sticking down the edges,used panel pins,and would have been nice if there was instructions in the box,the workman used super glue on stubborn corner that wouldn't stick,I give a 5 star rating as very nice tiles.

Gute Verarbeitung, einfache Montage und sehr gute Optik. Empfehlung. Guter Verkäufer.