SUNLU 3D Printer Resin, Strong Durable Nylon Like 3D Resin for LCD DLP SLA Resin 3D Printers, 395-405nm UV Light Curing 3D Printing Liquid Photopolymer Resin, Good for Functional Parts, 1000g, Beige

This is hands down the best resin I’ve tried so far. The print quality is excellent, with great detail and a smooth finish. My only wish is that it was a bit more impact-resistant. However, mixing it with a bit of flexible resin helps improve durability without losing too much detail. Highly recommend for anyone looking for reliable and consistent results.

Hand down the best resin i've used to date for the functional parts we sell. Printed on a Phrozen Shuffle XL - converted to a Mono 4k screen. Burn-in / Bottom Layers: 32-34 seconds / 4-6 layers & Normal Layers: 2.8 seconds per layer. See photos for my specs. Very flexible and allows us to insert our pivot ball end screws into the clips. See video. I used to have to hand mix flex agent into regular white resin. No More! Now I just buy this. I'm going to try this for a few other products, which I'm sure will work. These white clips we print are the most difficult to make. With this resin, I didn't have to mess with dialing in sizes, tolerances, or anything settings it just works out of the bottle.

The price is low and affordable however there is a bit of shrinkage. Large prints have a high tendency to separate from supports unless done right.

This stuff is amazing to print with! I've printed 7 different objects so far with 0 failures. This stuff is sturdy, dimensionally accurate and it doesn't need more than a couple of bottom layers (at 10s). I used 1.6s to 2s to depending on flexibility vs hardness. At 1.6s it's almost like a hard rubber. At 2s it is hard and nearly indestructible. I tried washing it with alcohol but it still felt a little sticky / tacky, so I washed it with plain ol tap water and cleaned right up! I'm going to save a fortune in alcohol from the looks of it. I photocured my first print, it looked great, but yellowed. I decided to just put my next print in a sunny window for 30 mins. No yellowing and it cured great! Fun fact! My cat knocked my prints off the 2nd story window onto the concrete below. It didn't harm it. Everything so far has been fairly large with simple geometries (containers of various kinds). I'm going to print some chess pieces next and I'll give an update when I do.

Good resin for a tougher functional part. Some details lost but definitely not enough if you want something that can take a little abuse and not snap. Very thick though so a little tougher to wash up.

I used this to make the Hero Me Gen 7 V2 parts for my FDM printer. The parts came out alright, but some of the thinner parts have curled with time. The parts and supports are very flexible/gelatinous after printing, but they become extremely strong and rigid after curing. The quality of the prints is also excellent once you dial-in the exposure settings, but the resolution is limited to 25 or 18um depending on your printer. 10um will result in a diminished resolution of smaller details due to a lack of adherence strength. You will need to use more supports and braces, but the result is exceptional.

This stuff is really great! The prints came out really flexible. Which is the main complaint I've always had with resin prints. I haven't printed any miniatures with it yet. The details facing away from the plate are super sharp and it takes really well to a hobby knife for cleaning up little support nubs. The only thing I'm not sure of is the details facing the build plate as the prints I've done so far haven't really had much of that. So far though I am super impressed and I think this maybe my new main go to resin.

When you branch off from your standard resin your always wonder what the pros and cons of a resin are besides change in color or opacity. This is one of those resins that you want to consider. With a stronger more durable make up this resin will prevent swords spears and fingers from models from breaking allowing a large room to bend. It won't be full slinky but it's enough to stop about 60% of accidental breaks. It allows your resin printer to be considered for making cosplay or props that will be taken outside of display cases. On the downside is that ALL of the resin is more durable. Causing more strain on your Vats FEP film is a common occurance and I have to change them about 20% more often. On top of that consider using significantly less supports for your models/props because they will not want to be removed from your prints. So using a hobby night of hobby scissors is a consideration or sanding or after care for your prints will be needed. Overall Sunlu offers more durability for prints that will be handled significantly more often that if feels like an FDM print in exchange for price point, wear and tear for your printer. TLDR Pros: Stronger Durability Con: Wears out printer All of the resin is stronger including supports.

Funciona genial en la mars 5 ultra

Gli oggetti stampati sono molto robusti ed al tempo stesso abbastanza elastici da assomigliare al Nylon, per ora pienamente soddisfatto (usata in abbinamento ad una Mars pro2)

Pour moi aprés avoir essayé plusieurs marques... C'et la plus efficace en rendu et utilisation

Leichte verarbeitung und gute qualität preislich ok

It prints very well The flexibility comes with a long wash cycle The color pigment seems to get washed out and the flexible part remains just a little translucent When washing this, it will leave your ipa very dirty