WT03 Micro FPV AIO 600TVL Camera 5.8G 25/50/200mW Adjustable Transmitter with Cloverleaf Antenna for Mini Aircraft

Its the right price for what it is, and it works. I used this for a simple RC airplane setup and it has completely changed the hobby. I'll probably switch to digital down the road but this is great to experience FPV flight and see if its for you. I simply plugged in existing 210mah PH1.25 batteries and was up and running.

I had been toying with the idea of getting into FPV flying with my RC airplanes for a while, and one of our club members pointed me towards these camera/TX combos. While I wouldn't consider this camera for photographic missions, it gives a good, clear image from a compact, lightweight package. It has the additional feature of a wide range of selectable channels, so that worry about channel conflicts at a flying event is minimized, and selectable TX power level, so if you're mounting it on something that will be staying close-by, you can reduce the battery draw and TX heat of the unit. It does get hot on the highest power setting, so having a mount with reasonable airflow is a consideration, along with not leaving it powered up for long periods with the model sitting still. Anyone looking to get into FPV without breaking the budget will find this camera/TX combo a good option.

Antenna is pretty flimsy and it can get pretty hot (expected). Everything else is perfect. Range and penetration was surprisingly very good. I would 100% buy again. It would also be nice if it had a much larger input voltage range. I had to use a BEC

Wolfwhoop WT03 Micro FPV AIO 600TVL Camera 5.8G 40CH 25mW/50mW/200mW adjustable Transmitter with Cloverleaf Antenna for Mini Aircraft This camera really impressed me with range. I have used it on all the power settings. I was actually very surprised and now I am experimenting with the various channels and power settings to see if I can get a clearer video feed from the camera for even longer runs. I will update this review soon with a video I made of the feed the camera gives. The WT03 camera is great for flying FPV and aerial views. I noticed little if any lag. With it mounted to a quadcopter, it got out to just over 700 meters before the FPV feed from the Wolfwhoop WT03 camera started cutting out and I had to turn back. That is very good range for this camera. There were no trees or anything else in the way...it was a straight shot, so I am not sure about the WT03's range in more congested areas. I have flown it on several quad-copters with similar results. The camera feed looks pretty good, and it definitely handles the bright sun and even lower light conditions well enough to enjoy it. This is a great All in One FPV cam to install on an RC quad-copter, plane, or ground vehicle. I love to see the view from the air. I will most likely be purchasing more of these. If you found this review Helpful, please check Yes. Much appreciated, Willy C

The packaging was decent, the instructions were easy to follow and was able to set it up and get it running in about 2-3 minutes. The camera quality is decent for its size. The range at max is pretty good and will not loose signal when going behind a couple walls in your house. The speed is pretty good and it feels like there is little to no delay from the goggles to the vtx. The only things to keep in mind is that the unit gets very hot when used at max power and the antenna is easy to bend so be careful when setting it up. Otherwise it’s a quick and fun way to add a VTX and Camera unit to your drone or rc car.

Perfect for running on 1s RC setup. Good quality for price. Super lightweight.

I wish I got this some years ago when I saw they were released. It is super easy to install and use. I just use scotch tape, double sided foam tape or zip ties, the button on the camera, and cheap betafpv vr02 goggles and its buttons to find the channel, pretty straight forward. The camera quality is good for this price and I get reasonable range with little interference (at least a football field length, don't want to go much further anyway for micro/mini aircraft in case something happens and have to go searching). I see many reviewers say it doesn't work, can't see through the noise. Maybe their reading comprehension, as mine, was the culprit because the instructions do say "powering on the vtx, blue LED display 0, indicating the vtx is powered on, but it is in off status without any transmission", I was getting the same terrible signal some say it has. Surprised I got any at all now that I know why. I changed it to 3 -'s stacked to get the most power (i thought it was supposed to show in goggles but finally looked at the display on the camera's board). It goes further than my micro whoops that say they do 200mw and those can go to the ends of my flying area no problem. It does get quite toasty and may be fragile if exposed to impacts as the antenna can get bent or lense scratched of course. My main complaint though is I wish there was at least some voltage display (of camera battery) so I know when it is about to cut out. There is no warning or indication it is low, just stops. So be prepared to go looking when you lose feed and hope it wasn't far and you can remember the area good, or you have record feature on your goggles so you can at least get close and hope it didn't glide far from there. A timer should be used depending on the battery size for the camera, which of course requires trial and error but there is also a list of current ranges for each power mode in the instructions for general idea. I recommend at least a 200mah for about 5 minutes highest power, and of course larger for larger aircraft that wont lose much flight time or have it at least covered by camera being remaining on when aircraft thrust battery is out. Or make a parallel adapter on the aircraft's power connector so camera can plug into 1 main battery. Also, the lens is a bit distorted for wide angle fisheye effect making distance judgment not very easy (everything is near on the edges but far in the middle, stretched in between) Of course they glue it in place with no option to remove it unless you want to start cutting. I also wish the antenna was detachable (so it can be inside aircraft while camera is outside through small hole), and the camera reversible so I can have right side up view while the unit is upside down (like for camera in cockpit window and antenna down in body). It can really affect aerodynamics with its drag and weight relative to smaller models. Anyway, sure there's these issues but I was not expecting the feed quality and range it has, not bad especially now it's down to $25, can't expect much better.

I've had an eachine tx01 as well as an akk 25mw aio fpv camera and I can honestly say this wolf whoop is my favorite. The video quality is pretty much identical across the three cameras, but the wolf whoops beats out the others in the antenna department. It has a nice 4 lobe rhcp antenna, that is thicker gauge wire than the others, but what's even better than that is the antenna is mounted on a flexible wire. This basically means the cable bends way before you ever would bend the lobes on the antenna. Also serves to protect the camera board from an antenna impact. I had to resolder the antennas on the other cameras every 4-5th crash, but this one hasn't needed any attention after a half dozen 30-40mph crashes. Granted I have it mounted in a pretty safe cage with a roll hoop, but still, I suspect the other two cameras would have been toasted by now. (They're already broken and disassembled for parts lol) The selectable output is also a super useful feature. 50mw provides a very noticeable boost in range and link quality compared to 25mw. I haven't even used 200mw, besides for testing purposes, because my fpv feed usually outreachs my rc tx range at the 50mw setting. And I'm running a crappy dipole on my vrx. I'm sure once I upgrade to something rhcp on my rx I'll have an even further increase in range and link quality. If I I need a separate micro fpv aio or somehow manage to trash this one, I'll definitely be buying this model again.

Too much Heating problem

Very good for light aircraft

中国製なので 未だに 到着してない

Ridiculously cool. Plug and play. Instant connection to my Emax transponder 2 fpv goggles (used on Tinyhawk 3) Applied to an upgraded toy drone for practice. Very cool. Has better reception than my tinywoop. So impressed I purchased another one to add to a F22 Raptor rc plane I’m building.

Funcional y adaptable, ya la estamos usando, pieza de buena calidad