NICGIGA 2.5G Base-T PCIe Network Adapter, Realtek RTL8125B 2.5Gbps/1Gbps/100Mbps PCI Express Gigabit Network Card Convert to Ethernet RJ45 LAN Port for Gaming/Office, Support Windows/Linux,Black

Au top, installation simple et rapide. J'ai bien tout le débit annoncé, pas de bridage de ça part

Out of the box this was not running at the 2.5Gb speeds (even though Windows reported it as running 2.5Gb) it was staying around 900mb with iperf3 test between 2 other machines on network that both have 2.5Gb NICs. Using the QNAP 2.5Gbe unmanaged switch for 3 PCs that all have 2.5Gbe NICs. They are segmented on their own VLAN coming from pfsense firewall appliance which also has 2.5Gbe. After updating the drivers from the Realtek site as per the pamphlet that came in the box along with a small form factor screw driver and 2 screws (using case screw to match black aesthetic) and the 2 I/O plates, then it unlocked the full menu in the interface's controller properties. Also was getting closer to the 2.5Gb speeds on local network, RDP feels smoother and stable connections without drops. There is some irregularity in the iperf3 tests though. Not getting the irregularities from 3rd PC to main PC so not sure if it's driver related or just an issue with the Realtek chipset of this card. Overall though satisfied with the price to performance and hope there will be future driver updates, not counting on it though. For what I need it to do, be a stable RDP connection it seems to be holding strong and helps not feel laggy like it did with the default 1Gb port on the X370 Taichi Mobo. This is an improvement. If you do want a blacked out PCB and the bright green LED isn't visible while doing work then this is a good 2.5Gbe card. Also make sure you get the latest driver from Realtek, out of the box is not fully unlocked. Happy packets :)

In case you don't want to read the full review the short version is: Good card, worth the money, fully recommended. The problem: The first picture shows the problem: a 1Gbps connection that only reaches just over 300Mbps, with a wired connection. Having checked every piece of equipment between modem and motherboard, including running a CAT 7 cable directly between the two the problem was finally identified as a dodgy Intel chipset on the ASUS B550-F motherboard. In other words the onboard LAN was just unable to deliver the full broadband speed - and had been delivering substandard speeds for some time. The solution: pictures 2-4: a NICGIGA 2.5Gbps PCI-E card with a Realtek chipset. Why this card? Well, simply put, it has a black backplate that fits in with the motherboard's black backplates. I know, not the best reason but it also has a known chipset, a decent heatsink on the main chip, an handle over the 1Gbps bandwidth, future-proofs to a certain extent and is at good price point. (A quick note about the future-proofing: a 1 Gigabit connection can potentially deliver over 1Gbps - up to 1.3Gbps - whereas a 1Gbps card stops at 1Gbps. This card is 2.5Gbps and so will handle over 1Gbps and provides some future-proofing for when the next major speed increase comes in.) Install: was really simple: unscrew a backplate, install the card, screw in the card, close the case and plug in a CAT 7 cable bought at the same time - KINBETA high speed 10Gbps 2 metre CAT 7 flat braided cable - and switch on PC. See pictures 6-8. The result: picture 9 shows the result. As soon as the PC started the card was recognised, no driver download was needed. The download speed jumped from 321.5Mbps to 925Mbps (picture 9) solving the problem in a most elegant way. It is interesting to note that the ping was 9ms both before and after upgrading the NIC and upload also remained the same - the 52Mbps which was the expected speed and initially highlighted the problem. For those with a small form factor PC it is worth noting that a smaller backplate is provided (see picture 5) as well as a screwdriver and two screws. Overall very happy with this purchase it solved the problem at a reasonable cost and I can feel the difference the higher speed connection makes. Definitely recommend this card.

A PRINCIPIO DESCONFIE DE QUE FUNCIONARA PLENAMENTE, PERO LA VERDAD FUE UNA SORPRESA PARA MI Y SIN DUDA CUMPLE CON LO DESCRIPCION, TENEIS UN GRAN PRODUCTOS CON PROBLEMAS DE CONECTIVIDAD CON UNA CALIDAD-PRECIO MUY BUENO.

I installed this into my AMD motherboard on Windows 11. It was immediately recognized on my machine -- with no drivers needing to be installed -- and easily achieved over 2 Gbps. It has a very small footprint with no heat issues.